da03572b32
A multi-link is a link where multiple converter devices are connected to a single logic device (FPGA). All links involved in a multi-link are synchronous and established at the same time. For a TX link this means that the FPGA receives multiple SYNC signals, one for each link. The state machine of the TX link peripheral must combine those SYNC signals into a single SYNC signal that is asserted when either of the external SYNC signals is asserted. Dynamic multi-link support must allow to select to which converter devices on the multi-link the SYNC signal is propagated too. This is useful when depending on the use case profile some converter devices are supposed to be disabled. Add the cfg_links_disable[0x081] register for multi-link control and propagate its value to the TX FSM. |
||
|---|---|---|
| .. | ||
| jesd204.tcl | ||