132 lines
4.3 KiB
Verilog
132 lines
4.3 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
`timescale 1ns/1ps
|
|
|
|
module ad_pps_receiver (
|
|
input clk,
|
|
input rst,
|
|
input gps_pps,
|
|
|
|
input up_clk,
|
|
input up_rstn,
|
|
output reg [31:0] up_pps_rcounter,
|
|
output reg up_pps_status,
|
|
input up_irq_mask,
|
|
output reg up_irq
|
|
);
|
|
|
|
// *************************************************************************
|
|
// 1PPS reception and reporting counter implementation
|
|
// Note: this module should run on the core clock
|
|
// *************************************************************************
|
|
|
|
reg [ 2:0] gps_pps_m = 3'b0;
|
|
reg [ 2:0] up_pps_m = 3'b0;
|
|
reg up_pps_status_m = 1'b0;
|
|
reg pps_toggle = 1'b0;
|
|
reg [31:0] free_rcounter = 32'b0;
|
|
reg [31:0] pps_rcounter = 32'b0;
|
|
reg pps_status = 1'b0;
|
|
|
|
wire pps_posedge_s;
|
|
wire up_pps_posedge_s;
|
|
|
|
// gps_pps is asynchronous from the clk
|
|
|
|
always @(posedge clk) begin
|
|
if (rst == 1'b1) begin
|
|
gps_pps_m <= 3'b0;
|
|
end else begin
|
|
gps_pps_m <= {gps_pps_m[1:0], gps_pps};
|
|
end
|
|
end
|
|
assign pps_posedge_s = ~gps_pps_m[2] & gps_pps_m[1];
|
|
|
|
always @(posedge clk) begin
|
|
if (rst == 1'b1) begin
|
|
free_rcounter <= 32'b0;
|
|
pps_rcounter <= 32'b0;
|
|
pps_status <= 1'b1;
|
|
end else if (pps_posedge_s == 1'b1) begin
|
|
free_rcounter <= 32'b0;
|
|
pps_rcounter <= free_rcounter;
|
|
pps_status <= 1'b0;
|
|
end else begin
|
|
free_rcounter <= free_rcounter + 32'b1;
|
|
if (free_rcounter[28] == 1'b1) begin
|
|
pps_status <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
// up_tdd_pps_rcounter CDC
|
|
|
|
always @(posedge clk) begin
|
|
if (rst == 1'b1) begin
|
|
pps_toggle <= 1'b0;
|
|
end else if (pps_posedge_s == 1'b1) begin
|
|
pps_toggle <= ~pps_toggle;
|
|
end
|
|
end
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_pps_m <= 3'b0;
|
|
up_pps_rcounter <= 1'b0;
|
|
up_pps_status_m <= 1'b1;
|
|
up_pps_status <= 1'b1;
|
|
end else begin
|
|
up_pps_m <= {up_pps_m[1:0], pps_toggle};
|
|
up_pps_status_m <= pps_status;
|
|
up_pps_status <= up_pps_status_m;
|
|
if ((up_pps_m[2] ^ up_pps_m[1]) == 1'b1) begin
|
|
up_pps_rcounter <= pps_rcounter;
|
|
end
|
|
end
|
|
end
|
|
assign up_pps_posedge_s = ~up_pps_m[2] & up_pps_m[1];
|
|
|
|
// IRQ generation
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_irq <= 1'b0;
|
|
end else begin
|
|
up_irq <= up_pps_posedge_s & ~up_irq_mask;
|
|
end
|
|
end
|
|
|
|
endmodule
|