pluto_hdl_adi/library/axi_dmac/2d_transfer.v

130 lines
4.1 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory of
// the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_2d_transfer (
input req_aclk,
input req_aresetn,
input req_valid,
output reg req_ready,
input [31:BYTES_PER_BEAT_WIDTH_DEST] req_dest_address,
input [31:BYTES_PER_BEAT_WIDTH_SRC] req_src_address,
input [DMA_LENGTH_WIDTH-1:0] req_x_length,
input [DMA_LENGTH_WIDTH-1:0] req_y_length,
input [DMA_LENGTH_WIDTH-1:0] req_dest_stride,
input [DMA_LENGTH_WIDTH-1:0] req_src_stride,
input req_sync_transfer_start,
output reg req_eot,
output reg out_req_valid,
input out_req_ready,
output [31:BYTES_PER_BEAT_WIDTH_DEST] out_req_dest_address,
output [31:BYTES_PER_BEAT_WIDTH_SRC] out_req_src_address,
output [DMA_LENGTH_WIDTH-1:0] out_req_length,
output reg out_req_sync_transfer_start,
input out_eot
);
parameter DMA_LENGTH_WIDTH = 24;
parameter BYTES_PER_BEAT_WIDTH_SRC = 3;
parameter BYTES_PER_BEAT_WIDTH_DEST = 3;
reg [31:BYTES_PER_BEAT_WIDTH_DEST] dest_address;
reg [31:BYTES_PER_BEAT_WIDTH_SRC] src_address;
reg [DMA_LENGTH_WIDTH-1:0] x_length;
reg [DMA_LENGTH_WIDTH-1:0] y_length;
reg [DMA_LENGTH_WIDTH-1:0] dest_stride;
reg [DMA_LENGTH_WIDTH-1:0] src_stride;
reg [1:0] req_id;
reg [1:0] eot_id;
reg [3:0] last_req;
assign out_req_dest_address = dest_address;
assign out_req_src_address = src_address;
assign out_req_length = x_length;
always @(posedge req_aclk)
begin
if (req_aresetn == 1'b0) begin
req_id <= 2'b0;
eot_id <= 2'b0;
req_eot <= 1'b0;
end else begin
if (out_req_valid && out_req_ready) begin
req_id <= req_id + 1'b1;
last_req[req_id] <= y_length == 0;
end
req_eot <= 1'b0;
if (out_eot) begin
eot_id <= eot_id + 1'b1;
req_eot <= last_req[eot_id];
end
end
end
always @(posedge req_aclk)
begin
if (req_aresetn == 1'b0) begin
dest_address <= 'h00;
src_address <= 'h00;
x_length <= 'h00;
y_length <= 'h00;
dest_stride <= 'h00;
src_stride <= 'h00;
req_ready <= 1'b1;
out_req_valid <= 1'b0;
out_req_sync_transfer_start <= 1'b0;
end else begin
if (req_ready) begin
if (req_valid) begin
dest_address <= req_dest_address;
src_address <= req_src_address;
x_length <= req_x_length;
y_length <= req_y_length;
dest_stride <= req_dest_stride;
src_stride <= req_src_stride;
out_req_sync_transfer_start <= req_sync_transfer_start;
req_ready <= 1'b0;
out_req_valid <= 1'b1;
end
end else begin
if (out_req_valid && out_req_ready) begin
dest_address <= dest_address + dest_stride[DMA_LENGTH_WIDTH-1:BYTES_PER_BEAT_WIDTH_DEST];
src_address <= src_address + src_stride[DMA_LENGTH_WIDTH-1:BYTES_PER_BEAT_WIDTH_SRC];
y_length <= y_length - 1'b1;
out_req_sync_transfer_start <= 1'b0;
if (y_length == 0) begin
out_req_valid <= 1'b0;
req_ready <= 1'b1;
end
end
end
end
end
endmodule