pluto_hdl_adi/projects/common/vcu118/vcu118_plddr4_dacfifo_bd.tcl

44 lines
2.1 KiB
Tcl

###############################################################################
## Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved.
### SPDX short identifier: ADIBSD
###############################################################################
proc ad_dacfifo_create {dac_fifo_name dac_data_width dac_dma_data_width dac_fifo_address_width} {
upvar ad_hdl_dir ad_hdl_dir
create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_clock_rtl:1.0 sys_clk_c1
set_property -dict [list CONFIG.FREQ_HZ {250000000}] [get_bd_intf_ports sys_clk_c1]
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddr4_rtl:1.0 ddr4_c1
# instance: ddr4
ad_ip_instance proc_sys_reset axi_rstgen_2
ad_ip_instance ip:ddr4 axi_ddr_cntrl_c1
ad_ip_parameter axi_ddr_cntrl_c1 CONFIG.C0_CLOCK_BOARD_INTERFACE default_250mhz_clk2
ad_ip_parameter axi_ddr_cntrl_c1 CONFIG.C0_DDR4_BOARD_INTERFACE ddr4_sdram_c1
ad_ip_parameter axi_ddr_cntrl_c1 CONFIG.RESET_BOARD_INTERFACE reset
ad_connect sys_rst axi_ddr_cntrl_c1/sys_rst
ad_connect sys_clk_c1 axi_ddr_cntrl_c1/C0_SYS_CLK
ad_connect ddr4_c1 axi_ddr_cntrl_c1/C0_DDR4
ad_ip_instance axi_dacfifo $dac_fifo_name
ad_ip_parameter $dac_fifo_name CONFIG.DAC_DATA_WIDTH $dac_data_width
ad_ip_parameter $dac_fifo_name CONFIG.DMA_DATA_WIDTH $dac_dma_data_width
ad_ip_parameter $dac_fifo_name CONFIG.AXI_DATA_WIDTH 512
ad_ip_parameter $dac_fifo_name CONFIG.AXI_SIZE 6
ad_ip_parameter $dac_fifo_name CONFIG.AXI_LENGTH 255
ad_ip_parameter $dac_fifo_name CONFIG.AXI_ADDRESS 0x80000000
ad_ip_parameter $dac_fifo_name CONFIG.AXI_ADDRESS_LIMIT 0xbfffffff
ad_connect axi_ddr_cntrl_c1/C0_DDR4_S_AXI $dac_fifo_name/axi
ad_connect axi_ddr_cntrl_c1/c0_ddr4_ui_clk $dac_fifo_name/axi_clk
ad_connect axi_ddr_cntrl_c1/c0_ddr4_ui_clk axi_rstgen_2/slowest_sync_clk
ad_connect sys_cpu_resetn axi_rstgen_2/ext_reset_in
ad_connect axi_rstgen_2/peripheral_aresetn $dac_fifo_name/axi_resetn
ad_connect axi_rstgen_2/peripheral_aresetn axi_ddr_cntrl_c1/c0_ddr4_aresetn
assign_bd_address [get_bd_addr_segs -of_objects [get_bd_cells axi_ddr_cntrl_c1]]
}