pluto_hdl_adi/projects/pzsdr/common/ccfmc_bd.tcl

204 lines
7.9 KiB
Tcl

# create board design
# default ports
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:mdio_rtl:1.0 eth1_mdio
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:rgmii_rtl:1.0 eth1_rgmii
create_bd_port -dir I -type intr eth1_intn
# hdmi interface
create_bd_port -dir O hdmi_out_clk
create_bd_port -dir O hdmi_hsync
create_bd_port -dir O hdmi_vsync
create_bd_port -dir O hdmi_data_e
create_bd_port -dir O -from 15 -to 0 hdmi_data
# i2s
create_bd_port -dir O -type clk i2s_mclk
create_bd_intf_port -mode Master -vlnv analog.com:interface:i2s_rtl:1.0 i2s
# spdif audio
create_bd_port -dir O spdif
## ps7 modifications
set_property -dict [list CONFIG.PCW_USE_DMA0 {1}] $sys_ps7
set_property -dict [list CONFIG.PCW_USE_DMA1 {1}] $sys_ps7
set_property -dict [list CONFIG.PCW_USE_DMA2 {1}] $sys_ps7
# ethernet-1
set sys_rgmii [create_bd_cell -type ip -vlnv xilinx.com:ip:gmii_to_rgmii:4.0 sys_rgmii]
set_property -dict [list CONFIG.SupportLevel {Include_Shared_Logic_in_Core}] $sys_rgmii
set sys_rgmii_rstgen [create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 sys_rgmii_rstgen]
set_property -dict [list CONFIG.C_EXT_RST_WIDTH {1}] $sys_rgmii_rstgen
# hdmi peripherals
set axi_hdmi_clkgen [create_bd_cell -type ip -vlnv analog.com:user:axi_clkgen:1.0 axi_hdmi_clkgen]
set axi_hdmi_core [create_bd_cell -type ip -vlnv analog.com:user:axi_hdmi_tx:1.0 axi_hdmi_core]
set_property -dict [list CONFIG.OUT_CLK_POLARITY {1}] $axi_hdmi_core
set axi_hdmi_dma [create_bd_cell -type ip -vlnv xilinx.com:ip:axi_vdma:6.2 axi_hdmi_dma]
set_property -dict [list CONFIG.c_m_axis_mm2s_tdata_width {64}] $axi_hdmi_dma
set_property -dict [list CONFIG.c_use_mm2s_fsync {1}] $axi_hdmi_dma
set_property -dict [list CONFIG.c_include_s2mm {0}] $axi_hdmi_dma
# audio peripherals
set sys_audio_clkgen [create_bd_cell -type ip -vlnv xilinx.com:ip:clk_wiz:5.3 sys_audio_clkgen]
set_property -dict [list CONFIG.PRIM_IN_FREQ {200.000}] $sys_audio_clkgen
set_property -dict [list CONFIG.CLKOUT1_REQUESTED_OUT_FREQ {12.288}] $sys_audio_clkgen
set_property -dict [list CONFIG.USE_LOCKED {false}] $sys_audio_clkgen
set_property -dict [list CONFIG.USE_RESET {true} CONFIG.RESET_TYPE {ACTIVE_LOW}] $sys_audio_clkgen
set axi_spdif_tx_core [create_bd_cell -type ip -vlnv analog.com:user:axi_spdif_tx:1.0 axi_spdif_tx_core]
set_property -dict [list CONFIG.DMA_TYPE {1}] $axi_spdif_tx_core
set_property -dict [list CONFIG.S_AXI_ADDRESS_WIDTH {16}] $axi_spdif_tx_core
set axi_i2s_adi [create_bd_cell -type ip -vlnv analog.com:user:axi_i2s_adi:1.0 axi_i2s_adi]
set_property -dict [list CONFIG.DMA_TYPE {1}] $axi_i2s_adi
set_property -dict [list CONFIG.S_AXI_ADDRESS_WIDTH {16}] $axi_i2s_adi
# system reset/clock definitions
ad_connect sys_200m_clk axi_hdmi_clkgen/clk
ad_connect sys_ps7/MDIO_ETHERNET_1 sys_rgmii/MDIO_GEM
ad_connect sys_ps7/GMII_ETHERNET_1 sys_rgmii/GMII
ad_connect sys_rgmii/MDIO_PHY eth1_mdio
ad_connect sys_rgmii/RGMII eth1_rgmii
ad_connect sys_ps7/ENET1_EXT_INTIN eth1_intn
ad_connect sys_200m_clk sys_rgmii_rstgen/slowest_sync_clk
ad_connect sys_200m_clk sys_rgmii/clkin
ad_connect sys_rgmii_rstgen/ext_reset_in sys_ps7/FCLK_RESET0_N
ad_connect sys_rgmii_rstgen/peripheral_reset sys_rgmii/tx_reset
ad_connect sys_rgmii_rstgen/peripheral_reset sys_rgmii/rx_reset
# hdmi
ad_connect sys_cpu_clk axi_hdmi_core/vdma_clk
ad_connect sys_cpu_clk axi_hdmi_dma/m_axis_mm2s_aclk
ad_connect axi_hdmi_core/hdmi_clk axi_hdmi_clkgen/clk_0
ad_connect axi_hdmi_core/hdmi_out_clk hdmi_out_clk
ad_connect axi_hdmi_core/hdmi_16_hsync hdmi_hsync
ad_connect axi_hdmi_core/hdmi_16_vsync hdmi_vsync
ad_connect axi_hdmi_core/hdmi_16_data_e hdmi_data_e
ad_connect axi_hdmi_core/hdmi_16_data hdmi_data
ad_connect axi_hdmi_core/vdma_valid axi_hdmi_dma/m_axis_mm2s_tvalid
ad_connect axi_hdmi_core/vdma_data axi_hdmi_dma/m_axis_mm2s_tdata
ad_connect axi_hdmi_core/vdma_ready axi_hdmi_dma/m_axis_mm2s_tready
ad_connect axi_hdmi_core/vdma_fs axi_hdmi_dma/mm2s_fsync
ad_connect axi_hdmi_core/vdma_fs axi_hdmi_core/vdma_fs_ret
# spdif audio
ad_connect sys_cpu_clk axi_spdif_tx_core/DMA_REQ_ACLK
ad_connect sys_cpu_clk sys_ps7/DMA0_ACLK
ad_connect sys_cpu_resetn axi_spdif_tx_core/DMA_REQ_RSTN
ad_connect sys_ps7/DMA0_REQ axi_spdif_tx_core/DMA_REQ
ad_connect sys_ps7/DMA0_ACK axi_spdif_tx_core/DMA_ACK
ad_connect sys_200m_clk sys_audio_clkgen/clk_in1
ad_connect sys_cpu_resetn sys_audio_clkgen/resetn
ad_connect sys_audio_clkgen/clk_out1 axi_spdif_tx_core/spdif_data_clk
ad_connect spdif axi_spdif_tx_core/spdif_tx_o
# i2s audio
ad_connect sys_cpu_clk axi_i2s_adi/DMA_REQ_RX_ACLK
ad_connect sys_cpu_clk axi_i2s_adi/DMA_REQ_TX_ACLK
ad_connect sys_cpu_clk sys_ps7/DMA1_ACLK
ad_connect sys_cpu_clk sys_ps7/DMA2_ACLK
ad_connect sys_cpu_resetn axi_i2s_adi/DMA_REQ_RX_RSTN
ad_connect sys_cpu_resetn axi_i2s_adi/DMA_REQ_TX_RSTN
ad_connect sys_ps7/DMA1_REQ axi_i2s_adi/DMA_REQ_TX
ad_connect sys_ps7/DMA1_ACK axi_i2s_adi/DMA_ACK_TX
ad_connect sys_ps7/DMA2_REQ axi_i2s_adi/DMA_REQ_RX
ad_connect sys_ps7/DMA2_ACK axi_i2s_adi/DMA_ACK_RX
ad_connect sys_audio_clkgen/clk_out1 i2s_mclk
ad_connect sys_audio_clkgen/clk_out1 axi_i2s_adi/DATA_CLK_I
ad_connect i2s axi_i2s_adi/I2S
# interrupts
ad_cpu_interrupt ps-15 mb-15 axi_hdmi_dma/mm2s_introut
# interconnects
ad_cpu_interconnect 0x79000000 axi_hdmi_clkgen
ad_cpu_interconnect 0x43000000 axi_hdmi_dma
ad_cpu_interconnect 0x70e00000 axi_hdmi_core
ad_cpu_interconnect 0x75c00000 axi_spdif_tx_core
ad_cpu_interconnect 0x77600000 axi_i2s_adi
ad_mem_hp0_interconnect sys_cpu_clk sys_ps7/S_AXI_HP0
ad_mem_hp0_interconnect sys_cpu_clk axi_hdmi_dma/M_AXI_MM2S
# un-used io (gt)
set axi_pz_xcvrlb [create_bd_cell -type ip -vlnv analog.com:user:axi_xcvrlb:1.0 axi_pz_xcvrlb]
set_property -dict [list CONFIG.NUM_OF_LANES {2}] $axi_pz_xcvrlb
create_bd_port -dir I gt_ref_clk
create_bd_port -dir I -from 1 -to 0 gt_rx_p
create_bd_port -dir I -from 1 -to 0 gt_rx_n
create_bd_port -dir O -from 1 -to 0 gt_tx_p
create_bd_port -dir O -from 1 -to 0 gt_tx_n
ad_cpu_interconnect 0x44A60000 axi_pz_xcvrlb
ad_connect axi_pz_xcvrlb/ref_clk gt_ref_clk
ad_connect axi_pz_xcvrlb/rx_p gt_rx_p
ad_connect axi_pz_xcvrlb/rx_n gt_rx_n
ad_connect axi_pz_xcvrlb/tx_p gt_tx_p
ad_connect axi_pz_xcvrlb/tx_n gt_tx_n
# un-used io (regular)
set axi_gpreg [create_bd_cell -type ip -vlnv analog.com:user:axi_gpreg:1.0 axi_gpreg]
set_property -dict [list CONFIG.NUM_OF_CLK_MONS {3}] $axi_gpreg
set_property -dict [list CONFIG.NUM_OF_IO {4}] $axi_gpreg
set_property -dict [list CONFIG.BUF_ENABLE_0 {1}] $axi_gpreg
set_property -dict [list CONFIG.BUF_ENABLE_1 {1}] $axi_gpreg
set_property -dict [list CONFIG.BUF_ENABLE_2 {1}] $axi_gpreg
create_bd_port -dir I -from 31 -to 0 gp_in_0
create_bd_port -dir I -from 31 -to 0 gp_in_1
create_bd_port -dir I -from 31 -to 0 gp_in_2
create_bd_port -dir I -from 31 -to 0 gp_in_3
create_bd_port -dir O -from 31 -to 0 gp_out_0
create_bd_port -dir O -from 31 -to 0 gp_out_1
create_bd_port -dir O -from 31 -to 0 gp_out_2
create_bd_port -dir O -from 31 -to 0 gp_out_3
create_bd_port -dir O -from 31 -to 0 gp_ioenb_0
create_bd_port -dir O -from 31 -to 0 gp_ioenb_1
create_bd_port -dir O -from 31 -to 0 gp_ioenb_2
create_bd_port -dir O -from 31 -to 0 gp_ioenb_3
create_bd_port -dir I clk_0
create_bd_port -dir I clk_1
create_bd_port -dir I clk_2
ad_connect clk_0 axi_gpreg/d_clk_0
ad_connect clk_1 axi_gpreg/d_clk_1
ad_connect clk_2 axi_gpreg/d_clk_2
ad_connect gp_in_0 axi_gpreg/up_gp_in_0
ad_connect gp_in_1 axi_gpreg/up_gp_in_1
ad_connect gp_in_2 axi_gpreg/up_gp_in_2
ad_connect gp_in_3 axi_gpreg/up_gp_in_3
ad_connect gp_out_0 axi_gpreg/up_gp_out_0
ad_connect gp_out_1 axi_gpreg/up_gp_out_1
ad_connect gp_out_2 axi_gpreg/up_gp_out_2
ad_connect gp_out_3 axi_gpreg/up_gp_out_3
ad_connect gp_ioenb_0 axi_gpreg/up_gp_ioenb_0
ad_connect gp_ioenb_1 axi_gpreg/up_gp_ioenb_1
ad_connect gp_ioenb_2 axi_gpreg/up_gp_ioenb_2
ad_connect gp_ioenb_3 axi_gpreg/up_gp_ioenb_3
ad_cpu_interconnect 0x41200000 axi_gpreg
## temporary (remove ila indirectly)
delete_bd_objs [get_bd_cells ila_adc]