zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/util_dacfifo/util_dacfifo.v

331 lines
10 KiB
Verilog
Raw Blame History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module util_dacfifo #(
parameter ADDRESS_WIDTH = 6,
parameter DATA_WIDTH = 128) (
// DMA interface
input dma_clk,
input dma_rst,
input dma_valid,
input [(DATA_WIDTH-1):0] dma_data,
output reg dma_ready,
input dma_xfer_req,
input dma_xfer_last,
// DAC interface
input dac_clk,
input dac_rst,
input dac_valid,
output reg [(DATA_WIDTH-1):0] dac_data,
output reg dac_dunf,
output reg dac_xfer_out,
input bypass);
localparam FIFO_THRESHOLD_HI = {(ADDRESS_WIDTH){1'b1}} - 4;
// internal registers
reg [(ADDRESS_WIDTH-1):0] dma_waddr = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_waddr_g = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_lastaddr_g = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_raddr_m1 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_raddr_m2 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_raddr = 'b0;
reg [(ADDRESS_WIDTH-1):0] dma_addr_diff = 'b0;
reg dma_ready_fifo = 1'b0;
reg dma_ready_bypass = 1'b0;
reg dma_bypass = 1'b0;
reg dma_bypass_m1 = 1'b0;
reg dma_xfer_out_fifo = 1'b0;
reg dma_xfer_out_bypass = 1'b0;
reg [(ADDRESS_WIDTH-1):0] dac_raddr = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_raddr_g = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_waddr = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_waddr_m1 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_waddr_m2 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_addr_diff = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_lastaddr_m1 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_lastaddr_m2 = 'b0;
reg [(ADDRESS_WIDTH-1):0] dac_lastaddr = 'b0;
reg dac_mem_ready = 1'b0;
reg dac_xfer_out_fifo = 1'b0;
reg dac_xfer_out_fifo_m1 = 1'b0;
reg dac_xfer_out_bypass = 1'b0;
reg dac_xfer_out_bypass_m1 = 1'b0;
reg dac_bypass = 1'b0;
reg dac_bypass_m1 = 1'b0;
// internal wires
wire dma_wren_s;
wire [(DATA_WIDTH-1):0] dac_data_s;
wire [ADDRESS_WIDTH:0] dma_addr_diff_s;
wire [ADDRESS_WIDTH:0] dac_addr_diff_s;
wire [(ADDRESS_WIDTH-1):0] dma_waddr_b2g_s;
wire [(ADDRESS_WIDTH-1):0] dac_raddr_b2g_s;
wire [(ADDRESS_WIDTH-1):0] dma_raddr_g2b_s;
wire [(ADDRESS_WIDTH-1):0] dac_waddr_g2b_s;
wire [(ADDRESS_WIDTH-1):0] dac_lastaddr_g2b_s;
wire dac_mem_ren_s;
// DMA / Write interface
// fifo is always ready, if it's not in bypass mode
always @(posedge dma_clk) begin
if(dma_rst == 1'b1) begin
dma_ready_fifo <= 1'b0;
end else begin
dma_ready_fifo <= 1'b1;
end
end
// if bypass is enabled, fifo request data until reaches the high threshold.
assign dma_addr_diff_s = {1'b1, dma_waddr} - dma_raddr;
always @(posedge dma_clk) begin
if (dma_rst == 1'b1) begin
dma_addr_diff <= 'b0;
dma_raddr_m1 <= 'b0;
dma_raddr_m2 <= 'b0;
dma_raddr <= 'b0;
dma_ready_bypass <= 1'b0;
end else begin
dma_raddr_m1 <= dac_raddr_g;
dma_raddr_m2 <= dma_raddr_m1;
dma_raddr <= dma_raddr_g2b_s;
dma_addr_diff <= dma_addr_diff_s[ADDRESS_WIDTH-1:0];
if (dma_addr_diff >= FIFO_THRESHOLD_HI) begin
dma_ready_bypass <= 1'b0;
end else begin
dma_ready_bypass <= 1'b1;
end
end
end
ad_g2b #(
.DATA_WIDTH (ADDRESS_WIDTH))
i_dma_raddr_g2b (
.din (dma_raddr_m2),
.dout (dma_raddr_g2b_s));
// write address generation
assign dma_wren_s = dma_valid & dma_xfer_req & dma_ready;
always @(posedge dma_clk) begin
if(dma_rst == 1'b1) begin
dma_waddr <= 'b0;
dma_waddr_g <= 'b0;
dma_xfer_out_fifo <= 1'b0;
dma_xfer_out_bypass <= 1'b0;
end else begin
if (dma_wren_s == 1'b1) begin
dma_waddr <= dma_waddr + 1'b1;
dma_xfer_out_fifo <= 1'b0;
end
if (dma_xfer_last == 1'b1) begin
dma_waddr <= 'b0;
dma_xfer_out_fifo <= 1'b1;
end
dma_waddr_g <= dma_waddr_b2g_s;
dma_xfer_out_bypass <= dma_xfer_req;
end
end
ad_b2g #(
.DATA_WIDTH (ADDRESS_WIDTH))
i_dma_waddr_b2g (
.din (dma_waddr),
.dout (dma_waddr_b2g_s));
// save the last write address
always @(posedge dma_clk) begin
if (dma_rst == 1'b1) begin
dma_lastaddr_g <= 'b0;
end else begin
if (dma_bypass == 1'b0) begin
dma_lastaddr_g <= (dma_xfer_last == 1'b1)? dma_waddr_b2g_s : dma_lastaddr_g;
end
end
end
// DAC / Read interface
// The memory module is ready if it's not empty
assign dac_addr_diff_s = {1'b1, dac_waddr} - dac_raddr;
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_addr_diff <= 'b0;
dac_waddr_m1 <= 'b0;
dac_waddr_m2 <= 'b0;
dac_waddr <= 'b0;
dac_mem_ready <= 1'b0;
end else begin
dac_waddr_m1 <= dma_waddr_g;
dac_waddr_m2 <= dac_waddr_m1;
dac_waddr <= dac_waddr_g2b_s;
dac_addr_diff <= dac_addr_diff_s[ADDRESS_WIDTH-1:0];
if (dac_addr_diff > 0) begin
dac_mem_ready <= 1'b1;
end else begin
dac_mem_ready <= 1'b0;
end
end
end
ad_g2b #(
.DATA_WIDTH (ADDRESS_WIDTH))
i_dac_waddr_g2b (
.din (dac_waddr_m2),
.dout (dac_waddr_g2b_s));
// sync lastaddr to dac clock domain
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_lastaddr_m1 <= 1'b0;
dac_lastaddr_m2 <= 1'b0;
dac_xfer_out_fifo_m1 <= 1'b0;
dac_xfer_out_fifo <= 1'b0;
dac_xfer_out_bypass_m1 <= 1'b0;
dac_xfer_out_bypass <= 1'b0;
end else begin
dac_lastaddr_m1 <= dma_lastaddr_g;
dac_lastaddr_m2 <= dac_lastaddr_m1;
dac_lastaddr <= dac_lastaddr_g2b_s;
dac_xfer_out_fifo_m1 <= dma_xfer_out_fifo;
dac_xfer_out_fifo <= dac_xfer_out_fifo_m1;
dac_xfer_out_bypass_m1 <= dma_xfer_out_bypass;
dac_xfer_out_bypass <= dac_xfer_out_bypass_m1;
end
end
ad_g2b #(
.DATA_WIDTH (ADDRESS_WIDTH))
i_dac_lastaddr_g2b (
.din (dac_lastaddr_m2),
.dout (dac_lastaddr_g2b_s));
// generate dac read address
assign dac_mem_ren_s = (dac_bypass == 1'b1) ? (dac_valid & dac_mem_ready) : (dac_valid & dac_xfer_out_fifo);
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_raddr <= 'b0;
dac_raddr_g <= 'b0;
end else begin
if (dac_mem_ren_s == 1'b1) begin
if (dac_lastaddr == 'b0 || dac_raddr < dac_lastaddr) begin
dac_raddr <= dac_raddr + 1'b1;
end else begin
dac_raddr <= 'b0;
end
end
dac_raddr_g <= dac_raddr_b2g_s;
end
end
ad_b2g #(
.DATA_WIDTH (ADDRESS_WIDTH))
i_dac_raddr_b2g (
.din (dac_raddr),
.dout (dac_raddr_b2g_s));
// memory instantiation
ad_mem #(
.ADDRESS_WIDTH (ADDRESS_WIDTH),
.DATA_WIDTH (DATA_WIDTH))
i_mem_fifo (
.clka (dma_clk),
.wea (dma_wren_s),
.addra (dma_waddr),
.dina (dma_data),
.clkb (dac_clk),
.reb (1'b1),
.addrb (dac_raddr),
.doutb (dac_data_s));
// define underflow
// underflow make sense just if bypass is enabled
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_dunf <= 1'b0;
end else begin
dac_dunf <= (dac_bypass == 1'b1) ? (dac_valid & dac_xfer_out_bypass & ~dac_mem_ren_s) : 1'b0;
end
end
// output logic
always @(posedge dma_clk) begin
dma_bypass_m1 <= bypass;
dma_bypass <= dma_bypass_m1;
end
always @(posedge dac_clk) begin
dac_bypass_m1 <= bypass;
dac_bypass <= dac_bypass_m1;
end
always @(posedge dma_clk) begin
dma_ready <= (dma_bypass == 1'b1) ? dma_ready_bypass : dma_ready_fifo;
end
always @(posedge dac_clk) begin
dac_data <= dac_data_s;
dac_xfer_out <= (dac_bypass == 1'b1) ? dac_xfer_out_bypass : dac_xfer_out_fifo;
end
endmodule
Reference in New Issue View Git Blame Copy Permalink