387 lines
18 KiB
Tcl
387 lines
18 KiB
Tcl
|
|
# daq2
|
|
|
|
if {$sys_zynq == 1} {
|
|
|
|
set spi_csn_2_o [create_bd_port -dir O spi_csn_2_o]
|
|
set spi_csn_1_o [create_bd_port -dir O spi_csn_1_o]
|
|
set spi_csn_0_o [create_bd_port -dir O spi_csn_0_o]
|
|
set spi_csn_i [create_bd_port -dir I spi_csn_i]
|
|
|
|
} else {
|
|
|
|
set spi_csn_o [create_bd_port -dir O -from 2 -to 0 spi_csn_o]
|
|
set spi_csn_i [create_bd_port -dir I -from 2 -to 0 spi_csn_i]
|
|
}
|
|
|
|
set spi_clk_i [create_bd_port -dir I spi_clk_i]
|
|
set spi_clk_o [create_bd_port -dir O spi_clk_o]
|
|
set spi_sdo_i [create_bd_port -dir I spi_sdo_i]
|
|
set spi_sdo_o [create_bd_port -dir O spi_sdo_o]
|
|
set spi_sdi_i [create_bd_port -dir I spi_sdi_i]
|
|
|
|
set rx_ref_clk [create_bd_port -dir I rx_ref_clk]
|
|
set rx_sync [create_bd_port -dir O rx_sync]
|
|
set rx_sysref [create_bd_port -dir I rx_sysref]
|
|
set rx_data_p [create_bd_port -dir I -from 3 -to 0 rx_data_p]
|
|
set rx_data_n [create_bd_port -dir I -from 3 -to 0 rx_data_n]
|
|
|
|
set tx_ref_clk [create_bd_port -dir I tx_ref_clk]
|
|
set tx_sync [create_bd_port -dir I tx_sync]
|
|
set tx_sysref [create_bd_port -dir I tx_sysref]
|
|
set tx_data_p [create_bd_port -dir O -from 3 -to 0 tx_data_p]
|
|
set tx_data_n [create_bd_port -dir O -from 3 -to 0 tx_data_n]
|
|
|
|
if {$sys_zynq == 0} {
|
|
|
|
set gpio_ctl_i [create_bd_port -dir I -from 5 -to 0 gpio_ctl_i]
|
|
set gpio_ctl_o [create_bd_port -dir O -from 5 -to 0 gpio_ctl_o]
|
|
set gpio_ctl_t [create_bd_port -dir O -from 5 -to 0 gpio_ctl_t]
|
|
set gpio_status_i [create_bd_port -dir I -from 4 -to 0 gpio_status_i]
|
|
set gpio_status_o [create_bd_port -dir O -from 4 -to 0 gpio_status_o]
|
|
set gpio_status_t [create_bd_port -dir O -from 4 -to 0 gpio_status_t]
|
|
}
|
|
|
|
set dac_clk [create_bd_port -dir O dac_clk]
|
|
set dac_valid_0 [create_bd_port -dir O dac_valid_0]
|
|
set dac_enable_0 [create_bd_port -dir O dac_enable_0]
|
|
set dac_ddata_0 [create_bd_port -dir I -from 63 -to 0 dac_ddata_0]
|
|
set dac_valid_1 [create_bd_port -dir O dac_valid_1]
|
|
set dac_enable_1 [create_bd_port -dir O dac_enable_1]
|
|
set dac_ddata_1 [create_bd_port -dir I -from 63 -to 0 dac_ddata_1]
|
|
set dac_valid_2 [create_bd_port -dir O dac_valid_2]
|
|
set dac_enable_2 [create_bd_port -dir O dac_enable_2]
|
|
set dac_ddata_2 [create_bd_port -dir I -from 63 -to 0 dac_ddata_2]
|
|
set dac_valid_3 [create_bd_port -dir O dac_valid_3]
|
|
set dac_enable_3 [create_bd_port -dir O dac_enable_3]
|
|
set dac_ddata_3 [create_bd_port -dir I -from 63 -to 0 dac_ddata_3]
|
|
set dac_drd [create_bd_port -dir I dac_drd]
|
|
set dac_ddata [create_bd_port -dir O -from 127 -to 0 dac_ddata]
|
|
|
|
set adc_clk [create_bd_port -dir O adc_clk]
|
|
set adc_enable_0 [create_bd_port -dir O adc_enable_0]
|
|
set adc_valid_0 [create_bd_port -dir O adc_valid_0]
|
|
set adc_data_0 [create_bd_port -dir O -from 63 -to 0 adc_data_0]
|
|
set adc_enable_1 [create_bd_port -dir O adc_enable_1]
|
|
set adc_valid_1 [create_bd_port -dir O adc_valid_1]
|
|
set adc_data_1 [create_bd_port -dir O -from 63 -to 0 adc_data_1]
|
|
set adc_dwr [create_bd_port -dir I adc_dwr]
|
|
set adc_dsync [create_bd_port -dir I adc_dsync]
|
|
set adc_ddata [create_bd_port -dir I -from 127 -to 0 adc_ddata]
|
|
|
|
set axi_ad9144_dma_intr [create_bd_port -dir O axi_ad9144_dma_intr]
|
|
set axi_ad9680_dma_intr [create_bd_port -dir O axi_ad9680_dma_intr]
|
|
set axi_daq2_spi_intr [create_bd_port -dir O axi_daq2_spi_intr ]
|
|
set axi_daq2_gpio_intr [create_bd_port -dir O axi_daq2_gpio_intr ]
|
|
|
|
# dac peripherals
|
|
|
|
set axi_ad9144_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9144:1.0 axi_ad9144_core]
|
|
set_property -dict [list CONFIG.PCORE_QUAD_DUAL_N {0}] $axi_ad9144_core
|
|
|
|
set axi_ad9144_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9144_jesd]
|
|
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {1}] $axi_ad9144_jesd
|
|
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9144_jesd
|
|
|
|
set axi_ad9144_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9144_dma]
|
|
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {0}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {2}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.PCORE_ID {1}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {0}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_CLKS_ASYNC_REQ_SRC {1}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_DMA_LENGTH_WIDTH {24}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_CYCLIC {1}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_SRC {128}] $axi_ad9144_dma
|
|
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_DEST {128}] $axi_ad9144_dma
|
|
|
|
|
|
# adc peripherals
|
|
|
|
set axi_ad9680_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9680:1.0 axi_ad9680_core]
|
|
|
|
set axi_ad9680_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9680_jesd]
|
|
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9680_jesd
|
|
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9680_jesd
|
|
|
|
set axi_ad9680_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9680_dma]
|
|
set_property -dict [list CONFIG.C_DMA_TYPE_SRC {1}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_DMA_TYPE_DEST {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.PCORE_ID {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_AXI_SLICE_SRC {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_AXI_SLICE_DEST {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_CLKS_ASYNC_DEST_REQ {1}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_SYNC_TRANSFER_START {1}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_DMA_LENGTH_WIDTH {24}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_2D_TRANSFER {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_CYCLIC {0}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_SRC {64}] $axi_ad9680_dma
|
|
set_property -dict [list CONFIG.C_DMA_DATA_WIDTH_DEST {64}] $axi_ad9680_dma
|
|
|
|
|
|
# dac/adc common gt/gpio
|
|
|
|
set axi_daq2_gt [create_bd_cell -type ip -vlnv analog.com:user:axi_jesd_gt:1.0 axi_daq2_gt]
|
|
set_property -dict [list CONFIG.PCORE_NUM_OF_TX_LANES {4}] $axi_daq2_gt
|
|
set_property -dict [list CONFIG.PCORE_NUM_OF_RX_LANES {4}] $axi_daq2_gt
|
|
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_0 {0}] $axi_daq2_gt
|
|
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_1 {3}] $axi_daq2_gt
|
|
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_2 {1}] $axi_daq2_gt
|
|
set_property -dict [list CONFIG.PCORE_TX_LANE_SEL_3 {2}] $axi_daq2_gt
|
|
|
|
# gpio and spi
|
|
|
|
if {$sys_zynq == 0} {
|
|
|
|
set axi_daq2_spi [create_bd_cell -type ip -vlnv xilinx.com:ip:axi_quad_spi:3.2 axi_daq2_spi]
|
|
set_property -dict [list CONFIG.C_USE_STARTUP {0}] $axi_daq2_spi
|
|
set_property -dict [list CONFIG.C_NUM_SS_BITS {3}] $axi_daq2_spi
|
|
set_property -dict [list CONFIG.C_SCK_RATIO {8}] $axi_daq2_spi
|
|
|
|
set axi_daq2_gpio [create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_daq2_gpio]
|
|
set_property -dict [list CONFIG.C_IS_DUAL {1}] $axi_daq2_gpio
|
|
set_property -dict [list CONFIG.C_GPIO_WIDTH {5}] $axi_daq2_gpio
|
|
set_property -dict [list CONFIG.C_GPIO2_WIDTH {6}] $axi_daq2_gpio
|
|
set_property -dict [list CONFIG.C_INTERRUPT_PRESENT {1}] $axi_daq2_gpio
|
|
}
|
|
|
|
if {$sys_zynq == 1} {
|
|
|
|
set_property -dict [list CONFIG.PCW_USE_S_AXI_HP1 {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_USE_S_AXI_HP2 {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_USE_S_AXI_HP3 {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_EN_CLK2_PORT {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_EN_RST2_PORT {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ {200.0}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_GPIO_EMIO_GPIO_IO {44}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {1}] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_SPI0_SPI0_IO {EMIO}] $sys_ps7
|
|
|
|
set_property LEFT 43 [get_bd_ports GPIO_I]
|
|
set_property LEFT 43 [get_bd_ports GPIO_O]
|
|
set_property LEFT 43 [get_bd_ports GPIO_T]
|
|
}
|
|
|
|
# connections (spi and gpio)
|
|
|
|
if {$sys_zynq == 0} {
|
|
|
|
ad_connect spi_csn_i axi_daq2_spi/ss_i
|
|
ad_connect spi_csn_o axi_daq2_spi/ss_o
|
|
ad_connect spi_clk_i axi_daq2_spi/sck_i
|
|
ad_connect spi_clk_o axi_daq2_spi/sck_o
|
|
ad_connect spi_sdo_i axi_daq2_spi/io0_i
|
|
ad_connect spi_sdo_o axi_daq2_spi/io0_o
|
|
ad_connect spi_sdi_i axi_daq2_spi/io1_i
|
|
|
|
} else {
|
|
|
|
ad_connect spi_csn_2_o sys_ps7/SPI0_SS2_O
|
|
ad_connect spi_csn_1_o sys_ps7/SPI0_SS1_O
|
|
ad_connect spi_csn_0_o sys_ps7/SPI0_SS_O
|
|
ad_connect spi_csn_i sys_ps7/SPI0_SS_I
|
|
ad_connect spi_clk_i sys_ps7/SPI0_SCLK_I
|
|
ad_connect spi_clk_o sys_ps7/SPI0_SCLK_O
|
|
ad_connect spi_sdo_i sys_ps7/SPI0_MOSI_I
|
|
ad_connect spi_sdo_o sys_ps7/SPI0_MOSI_O
|
|
ad_connect spi_sdi_i sys_ps7/SPI0_MISO_I
|
|
}
|
|
|
|
if {$sys_zynq == 0} {
|
|
|
|
ad_connect gpio_status_i axi_daq2_gpio/gpio_io_i
|
|
ad_connect gpio_status_o axi_daq2_gpio/gpio_io_o
|
|
ad_connect gpio_status_t axi_daq2_gpio/gpio_io_t
|
|
ad_connect gpio_ctl_i axi_daq2_gpio/gpio2_io_i
|
|
ad_connect gpio_ctl_o axi_daq2_gpio/gpio2_io_o
|
|
ad_connect gpio_ctl_t axi_daq2_gpio/gpio2_io_t
|
|
}
|
|
|
|
# connections (gt)
|
|
|
|
ad_connect axi_daq2_gt/ref_clk_q rx_ref_clk
|
|
ad_connect axi_daq2_gt/ref_clk_c tx_ref_clk
|
|
ad_connect axi_daq2_gt/rx_data_p rx_data_p
|
|
ad_connect axi_daq2_gt/rx_data_n rx_data_n
|
|
ad_connect axi_daq2_gt/rx_sync rx_sync
|
|
ad_connect axi_daq2_gt/rx_ext_sysref rx_sysref
|
|
ad_connect axi_daq2_gt/tx_data_p tx_data_p
|
|
ad_connect axi_daq2_gt/tx_data_n tx_data_n
|
|
ad_connect axi_daq2_gt/tx_sync tx_sync
|
|
ad_connect axi_daq2_gt/tx_ext_sysref tx_sysref
|
|
|
|
# connections (dac)
|
|
|
|
ad_connect axi_daq2_gt/tx_clk_g dac_clk
|
|
ad_connect axi_daq2_gt/tx_clk_g axi_daq2_gt/tx_clk
|
|
ad_connect axi_daq2_gt/tx_clk_g axi_ad9144_core/tx_clk
|
|
ad_connect axi_daq2_gt/tx_clk_g axi_ad9144_jesd/tx_core_clk
|
|
ad_connect axi_daq2_gt/tx_rst axi_ad9144_jesd/tx_reset
|
|
ad_connect axi_daq2_gt/tx_sysref axi_ad9144_jesd/tx_sysref
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_ccat:1.0 util_ccat_tx_gt_charisk
|
|
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_ccat_tx_gt_charisk]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_ccat_tx_gt_charisk]
|
|
|
|
ad_connect util_ccat_tx_gt_charisk/ccat_data axi_daq2_gt/tx_gt_charisk
|
|
ad_connect util_ccat_tx_gt_charisk/data_0 axi_ad9144_jesd/gt0_txcharisk
|
|
ad_connect util_ccat_tx_gt_charisk/data_1 axi_ad9144_jesd/gt1_txcharisk
|
|
ad_connect util_ccat_tx_gt_charisk/data_2 axi_ad9144_jesd/gt2_txcharisk
|
|
ad_connect util_ccat_tx_gt_charisk/data_3 axi_ad9144_jesd/gt3_txcharisk
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_ccat:1.0 util_ccat_tx_gt_data
|
|
set_property -dict [list CONFIG.CH_DW {32}] [get_bd_cells util_ccat_tx_gt_data]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_ccat_tx_gt_data]
|
|
|
|
ad_connect util_ccat_tx_gt_data/ccat_data axi_daq2_gt/tx_gt_data
|
|
ad_connect util_ccat_tx_gt_data/data_0 axi_ad9144_jesd/gt0_txdata
|
|
ad_connect util_ccat_tx_gt_data/data_1 axi_ad9144_jesd/gt1_txdata
|
|
ad_connect util_ccat_tx_gt_data/data_2 axi_ad9144_jesd/gt2_txdata
|
|
ad_connect util_ccat_tx_gt_data/data_3 axi_ad9144_jesd/gt3_txdata
|
|
|
|
ad_connect axi_daq2_gt/tx_rst_done axi_ad9144_jesd/tx_reset_done
|
|
ad_connect axi_daq2_gt/tx_ip_sync axi_ad9144_jesd/tx_sync
|
|
ad_connect axi_daq2_gt/tx_ip_sof axi_ad9144_jesd/tx_start_of_frame
|
|
ad_connect axi_daq2_gt/tx_ip_data axi_ad9144_jesd/tx_tdata
|
|
ad_connect axi_daq2_gt/tx_data axi_ad9144_core/tx_data
|
|
ad_connect axi_ad9144_core/dac_clk axi_ad9144_dma/fifo_rd_clk
|
|
ad_connect axi_ad9144_core/dac_valid_0 dac_valid_0
|
|
ad_connect axi_ad9144_core/dac_enable_0 dac_enable_0
|
|
ad_connect axi_ad9144_core/dac_ddata_0 dac_ddata_0
|
|
ad_connect axi_ad9144_core/dac_valid_1 dac_valid_1
|
|
ad_connect axi_ad9144_core/dac_enable_1 dac_enable_1
|
|
ad_connect axi_ad9144_core/dac_ddata_1 dac_ddata_1
|
|
ad_connect axi_ad9144_core/dac_valid_2 dac_valid_2
|
|
ad_connect axi_ad9144_core/dac_enable_2 dac_enable_2
|
|
ad_connect axi_ad9144_core/dac_ddata_2 dac_ddata_2
|
|
ad_connect axi_ad9144_core/dac_valid_3 dac_valid_3
|
|
ad_connect axi_ad9144_core/dac_enable_3 dac_enable_3
|
|
ad_connect axi_ad9144_core/dac_ddata_3 dac_ddata_3
|
|
ad_connect dac_drd axi_ad9144_dma/fifo_rd_en
|
|
ad_connect dac_ddata axi_ad9144_dma/fifo_rd_dout
|
|
ad_connect axi_ad9144_core/dac_dunf axi_ad9144_dma/fifo_rd_underflow
|
|
ad_connect axi_ad9144_dma_intr axi_ad9144_dma/irq
|
|
|
|
# connections (adc)
|
|
|
|
ad_connect axi_daq2_gt/rx_clk_g adc_clk
|
|
ad_connect axi_daq2_gt/rx_clk_g axi_daq2_gt/rx_clk
|
|
ad_connect axi_daq2_gt/rx_clk_g axi_ad9680_core/rx_clk
|
|
ad_connect axi_daq2_gt/rx_clk_g axi_ad9680_jesd/rx_core_clk
|
|
ad_connect axi_daq2_gt/rx_rst axi_ad9680_jesd/rx_reset
|
|
ad_connect axi_daq2_gt/rx_sysref axi_ad9680_jesd/rx_sysref
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_charisk
|
|
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
|
|
|
|
ad_connect util_bsplit_rx_gt_charisk/data axi_daq2_gt/rx_gt_charisk
|
|
ad_connect util_bsplit_rx_gt_charisk/split_data_0 axi_ad9680_jesd/gt0_rxcharisk
|
|
ad_connect util_bsplit_rx_gt_charisk/split_data_1 axi_ad9680_jesd/gt1_rxcharisk
|
|
ad_connect util_bsplit_rx_gt_charisk/split_data_2 axi_ad9680_jesd/gt2_rxcharisk
|
|
ad_connect util_bsplit_rx_gt_charisk/split_data_3 axi_ad9680_jesd/gt3_rxcharisk
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_disperr
|
|
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
|
|
|
|
ad_connect util_bsplit_rx_gt_disperr/data axi_daq2_gt/rx_gt_disperr
|
|
ad_connect util_bsplit_rx_gt_disperr/split_data_0 axi_ad9680_jesd/gt0_rxdisperr
|
|
ad_connect util_bsplit_rx_gt_disperr/split_data_1 axi_ad9680_jesd/gt1_rxdisperr
|
|
ad_connect util_bsplit_rx_gt_disperr/split_data_2 axi_ad9680_jesd/gt2_rxdisperr
|
|
ad_connect util_bsplit_rx_gt_disperr/split_data_3 axi_ad9680_jesd/gt3_rxdisperr
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_notintable
|
|
set_property -dict [list CONFIG.CH_DW {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
|
|
|
|
ad_connect util_bsplit_rx_gt_notintable/data axi_daq2_gt/rx_gt_notintable
|
|
ad_connect util_bsplit_rx_gt_notintable/split_data_0 axi_ad9680_jesd/gt0_rxnotintable
|
|
ad_connect util_bsplit_rx_gt_notintable/split_data_1 axi_ad9680_jesd/gt1_rxnotintable
|
|
ad_connect util_bsplit_rx_gt_notintable/split_data_2 axi_ad9680_jesd/gt2_rxnotintable
|
|
ad_connect util_bsplit_rx_gt_notintable/split_data_3 axi_ad9680_jesd/gt3_rxnotintable
|
|
|
|
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_data
|
|
set_property -dict [list CONFIG.CH_DW {32}] [get_bd_cells util_bsplit_rx_gt_data]
|
|
set_property -dict [list CONFIG.CH_CNT {4}] [get_bd_cells util_bsplit_rx_gt_data]
|
|
|
|
ad_connect util_bsplit_rx_gt_data/data axi_daq2_gt/rx_gt_data
|
|
ad_connect util_bsplit_rx_gt_data/split_data_0 axi_ad9680_jesd/gt0_rxdata
|
|
ad_connect util_bsplit_rx_gt_data/split_data_1 axi_ad9680_jesd/gt1_rxdata
|
|
ad_connect util_bsplit_rx_gt_data/split_data_2 axi_ad9680_jesd/gt2_rxdata
|
|
ad_connect util_bsplit_rx_gt_data/split_data_3 axi_ad9680_jesd/gt3_rxdata
|
|
|
|
ad_connect axi_daq2_gt/rx_rst_done axi_ad9680_jesd/rx_reset_done
|
|
ad_connect axi_daq2_gt/rx_ip_comma_align axi_ad9680_jesd/rxencommaalign_out
|
|
ad_connect axi_daq2_gt/rx_ip_sync axi_ad9680_jesd/rx_sync
|
|
ad_connect axi_daq2_gt/rx_ip_sof axi_ad9680_jesd/rx_start_of_frame
|
|
ad_connect axi_daq2_gt/rx_ip_data axi_ad9680_jesd/rx_tdata
|
|
ad_connect axi_daq2_gt/rx_data axi_ad9680_core/rx_data
|
|
ad_connect axi_ad9680_core/adc_enable_0 adc_enable_0
|
|
ad_connect axi_ad9680_core/adc_valid_0 adc_valid_0
|
|
ad_connect axi_ad9680_core/adc_data_0 adc_data_0
|
|
ad_connect axi_ad9680_core/adc_enable_1 adc_enable_1
|
|
ad_connect axi_ad9680_core/adc_valid_1 adc_valid_1
|
|
ad_connect axi_ad9680_core/adc_data_1 adc_data_1
|
|
ad_connect axi_daq2_gt/rx_rst axi_ad9680_fifo/adc_rst
|
|
ad_connect axi_ad9680_core/adc_clk axi_ad9680_fifo/adc_clk
|
|
ad_connect axi_ad9680_core/adc_dovf axi_ad9680_fifo/adc_wovf
|
|
ad_connect adc_dwr axi_ad9680_fifo/adc_wr
|
|
ad_connect adc_ddata axi_ad9680_fifo/adc_wdata
|
|
ad_connect sys_cpu_clk axi_ad9680_fifo/dma_clk
|
|
ad_connect sys_cpu_clk axi_ad9680_dma/s_axis_aclk
|
|
ad_connect axi_ad9680_fifo/dma_wr axi_ad9680_dma/s_axis_valid
|
|
ad_connect axi_ad9680_fifo/dma_wdata axi_ad9680_dma/s_axis_data
|
|
ad_connect axi_ad9680_fifo/dma_wready axi_ad9680_dma/s_axis_ready
|
|
ad_connect axi_ad9680_fifo/dma_xfer_req axi_ad9680_dma/s_axis_xfer_req
|
|
ad_connect axi_ad9680_dma_intr axi_ad9680_dma/irq
|
|
|
|
# interconnect (cpu)
|
|
|
|
ad_cpu_interconnect 0x44A60000 axi_daq2_gt
|
|
ad_cpu_interconnect 0x44A00000 axi_ad9144_core
|
|
ad_cpu_interconnect 0x44A90000 axi_ad9144_jesd
|
|
ad_cpu_interconnect 0x7c420000 axi_ad9144_dma
|
|
ad_cpu_interconnect 0x44A10000 axi_ad9680_core
|
|
ad_cpu_interconnect 0x44A91000 axi_ad9680_jesd
|
|
ad_cpu_interconnect 0x7c400000 axi_ad9680_dma
|
|
|
|
if {$sys_zynq == 0} {
|
|
|
|
ad_cpu_interconnect 0x40000000 axi_daq2_gpio
|
|
ad_cpu_interconnect 0x44A70000 axi_daq2_spi
|
|
|
|
ad_connect sys_cpu_clk axi_daq2_spi/ext_spi_clk
|
|
ad_connect axi_daq2_spi_intr axi_daq2_spi/ip2intc_irpt
|
|
ad_connect axi_daq2_gpio_intr axi_daq2_gpio/ip2intc_irpt
|
|
}
|
|
|
|
# gt uses hp3, and 100MHz clock for both DRP and AXI4
|
|
|
|
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
|
|
ad_mem_hp3_interconnect sys_cpu_clk axi_daq2_gt/m_axi
|
|
|
|
ad_connect sys_cpu_resetn axi_daq2_gt/m_axi_aresetn
|
|
ad_connect sys_cpu_clk axi_daq2_gt/drp_clk
|
|
|
|
# interconnect (mem/dac)
|
|
|
|
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
|
|
ad_mem_hp1_interconnect sys_cpu_clk axi_ad9144_dma/m_src_axi
|
|
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
|
|
ad_mem_hp2_interconnect sys_cpu_clk axi_ad9680_dma/m_dest_axi
|
|
|
|
# ila
|
|
|
|
set ila_jesd_rx_mon [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:5.0 ila_jesd_rx_mon]
|
|
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_jesd_rx_mon
|
|
set_property -dict [list CONFIG.C_NUM_OF_PROBES {1}] $ila_jesd_rx_mon
|
|
set_property -dict [list CONFIG.C_PROBE0_WIDTH {128}] $ila_jesd_rx_mon
|
|
|
|
ad_connect adc_clk ila_jesd_rx_mon/CLK
|
|
ad_connect adc_ddata ila_jesd_rx_mon/PROBE0
|
|
|
|
|
|
|