422 lines
13 KiB
Verilog
422 lines
13 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_adcfifo_wr #(
|
|
|
|
parameter AXI_DATA_WIDTH = 512,
|
|
parameter AXI_SIZE = 2,
|
|
parameter AXI_LENGTH = 16,
|
|
parameter AXI_ADDRESS = 32'h00000000,
|
|
parameter AXI_ADDRESS_LIMIT = 32'h00000000) (
|
|
|
|
// request and synchronization
|
|
|
|
input dma_xfer_req,
|
|
|
|
// read interface
|
|
|
|
output reg axi_rd_req,
|
|
output reg [ 31:0] axi_rd_addr,
|
|
|
|
// fifo interface
|
|
|
|
input adc_rst,
|
|
input adc_clk,
|
|
input adc_wr,
|
|
input [AXI_DATA_WIDTH-1:0] adc_wdata,
|
|
|
|
// axi interface
|
|
|
|
input axi_clk,
|
|
input axi_resetn,
|
|
output reg axi_awvalid,
|
|
output [ 3:0] axi_awid,
|
|
output [ 1:0] axi_awburst,
|
|
output axi_awlock,
|
|
output [ 3:0] axi_awcache,
|
|
output [ 2:0] axi_awprot,
|
|
output [ 3:0] axi_awqos,
|
|
output [ 3:0] axi_awuser,
|
|
output [ 7:0] axi_awlen,
|
|
output [ 2:0] axi_awsize,
|
|
output reg [ 31:0] axi_awaddr,
|
|
input axi_awready,
|
|
output axi_wvalid,
|
|
output [AXI_DATA_WIDTH-1:0] axi_wdata,
|
|
output [AXI_BYTE_WIDTH-1:0] axi_wstrb,
|
|
output axi_wlast,
|
|
output [ 3:0] axi_wuser,
|
|
input axi_wready,
|
|
input axi_bvalid,
|
|
input [ 3:0] axi_bid,
|
|
input [ 1:0] axi_bresp,
|
|
input [ 3:0] axi_buser,
|
|
output axi_bready,
|
|
|
|
// axi status
|
|
|
|
output reg axi_dwovf,
|
|
output reg axi_dwunf,
|
|
output reg axi_werror);
|
|
|
|
localparam AXI_BYTE_WIDTH = AXI_DATA_WIDTH/8;
|
|
localparam AXI_AWINCR = AXI_LENGTH * AXI_BYTE_WIDTH;
|
|
localparam BUF_THRESHOLD_LO = 8'd6;
|
|
localparam BUF_THRESHOLD_HI = 8'd250;
|
|
|
|
// internal registers
|
|
|
|
reg [ 2:0] adc_xfer_req_m = 'd0;
|
|
reg adc_xfer_init = 'd0;
|
|
reg adc_xfer_limit = 'd0;
|
|
reg adc_xfer_enable = 'd0;
|
|
reg [ 31:0] adc_xfer_addr = 'd0;
|
|
reg [ 7:0] adc_waddr = 'd0;
|
|
reg [ 7:0] adc_waddr_g = 'd0;
|
|
reg adc_rel_enable = 'd0;
|
|
reg adc_rel_toggle = 'd0;
|
|
reg [ 7:0] adc_rel_waddr = 'd0;
|
|
reg [ 2:0] axi_rel_toggle_m = 'd0;
|
|
reg [ 7:0] axi_rel_waddr = 'd0;
|
|
reg [ 7:0] axi_waddr_m1 = 'd0;
|
|
reg [ 7:0] axi_waddr_m2 = 'd0;
|
|
reg [ 7:0] axi_waddr = 'd0;
|
|
reg [ 7:0] axi_addr_diff = 'd0;
|
|
reg axi_almost_full = 'd0;
|
|
reg axi_almost_empty = 'd0;
|
|
reg [ 2:0] axi_xfer_req_m = 'd0;
|
|
reg axi_xfer_init = 'd0;
|
|
reg [ 7:0] axi_raddr = 'd0;
|
|
reg axi_rd = 'd0;
|
|
reg axi_rlast = 'd0;
|
|
reg axi_rd_d = 'd0;
|
|
reg axi_rlast_d = 'd0;
|
|
reg [AXI_DATA_WIDTH-1:0] axi_rdata_d = 'd0;
|
|
reg axi_reset = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire axi_rel_toggle_s;
|
|
wire [ 8:0] axi_addr_diff_s;
|
|
wire axi_wready_s;
|
|
wire axi_rd_s;
|
|
wire axi_req_s;
|
|
wire axi_rlast_s;
|
|
wire [AXI_DATA_WIDTH-1:0] axi_rdata_s;
|
|
|
|
// binary to grey conversion
|
|
|
|
function [7:0] b2g;
|
|
input [7:0] b;
|
|
reg [7:0] g;
|
|
begin
|
|
g[7] = b[7];
|
|
g[6] = b[7] ^ b[6];
|
|
g[5] = b[6] ^ b[5];
|
|
g[4] = b[5] ^ b[4];
|
|
g[3] = b[4] ^ b[3];
|
|
g[2] = b[3] ^ b[2];
|
|
g[1] = b[2] ^ b[1];
|
|
g[0] = b[1] ^ b[0];
|
|
b2g = g;
|
|
end
|
|
endfunction
|
|
|
|
// grey to binary conversion
|
|
|
|
function [7:0] g2b;
|
|
input [7:0] g;
|
|
reg [7:0] b;
|
|
begin
|
|
b[7] = g[7];
|
|
b[6] = b[7] ^ g[6];
|
|
b[5] = b[6] ^ g[5];
|
|
b[4] = b[5] ^ g[4];
|
|
b[3] = b[4] ^ g[3];
|
|
b[2] = b[3] ^ g[2];
|
|
b[1] = b[2] ^ g[1];
|
|
b[0] = b[1] ^ g[0];
|
|
g2b = b;
|
|
end
|
|
endfunction
|
|
|
|
// fifo interface
|
|
|
|
always @(posedge adc_clk) begin
|
|
if (adc_rst == 1'b1) begin
|
|
adc_waddr <= 'd0;
|
|
adc_waddr_g <= 'd0;
|
|
adc_xfer_req_m <= 'd0;
|
|
adc_xfer_init <= 'd0;
|
|
adc_xfer_limit <= 'd0;
|
|
adc_xfer_enable <= 'd0;
|
|
adc_xfer_addr <= 'd0;
|
|
adc_rel_enable <= 'd0;
|
|
adc_rel_toggle <= 'd0;
|
|
adc_rel_waddr <= 'd0;
|
|
end else begin
|
|
if ((adc_wr == 1'b1) && (adc_xfer_enable == 1'b1)) begin
|
|
adc_waddr <= adc_waddr + 1'b1;
|
|
end
|
|
adc_waddr_g <= b2g(adc_waddr);
|
|
adc_xfer_req_m <= {adc_xfer_req_m[1:0], dma_xfer_req};
|
|
adc_xfer_init <= adc_xfer_req_m[1] & ~adc_xfer_req_m[2];
|
|
if (adc_xfer_init == 1'b1) begin
|
|
adc_xfer_limit <= 1'd1;
|
|
end else if ((adc_xfer_addr >= AXI_ADDRESS_LIMIT) || (adc_xfer_enable == 1'b0)) begin
|
|
adc_xfer_limit <= 1'd0;
|
|
end
|
|
if (adc_xfer_init == 1'b1) begin
|
|
adc_xfer_enable <= 1'b1;
|
|
adc_xfer_addr <= AXI_ADDRESS;
|
|
end else if ((adc_waddr[1:0] == 2'h3) && (adc_wr == 1'b1)) begin
|
|
adc_xfer_enable <= adc_xfer_req_m[2] & adc_xfer_limit;
|
|
adc_xfer_addr <= adc_xfer_addr + AXI_AWINCR;
|
|
end
|
|
if (adc_waddr[1:0] == 2'h3) begin
|
|
adc_rel_enable <= adc_wr;
|
|
end else begin
|
|
adc_rel_enable <= 1'd0;
|
|
end
|
|
if (adc_rel_enable == 1'b1) begin
|
|
adc_rel_toggle <= ~adc_rel_toggle;
|
|
adc_rel_waddr <= adc_waddr;
|
|
end
|
|
end
|
|
end
|
|
|
|
// fifo signals on axi side
|
|
|
|
assign axi_rel_toggle_s = axi_rel_toggle_m[2] ^ axi_rel_toggle_m[1];
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_rel_toggle_m <= 'd0;
|
|
axi_rel_waddr <= 'd0;
|
|
axi_waddr_m1 <= 'd0;
|
|
axi_waddr_m2 <= 'd0;
|
|
axi_waddr <= 'd0;
|
|
end else begin
|
|
axi_rel_toggle_m <= {axi_rel_toggle_m[1:0], adc_rel_toggle};
|
|
if (axi_rel_toggle_s == 1'b1) begin
|
|
axi_rel_waddr <= adc_rel_waddr;
|
|
end
|
|
axi_waddr_m1 <= adc_waddr_g;
|
|
axi_waddr_m2 <= axi_waddr_m1;
|
|
axi_waddr <= g2b(axi_waddr_m2);
|
|
end
|
|
end
|
|
|
|
// overflow (no underflow possible)
|
|
|
|
assign axi_addr_diff_s = {1'b1, axi_waddr} - axi_raddr;
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_addr_diff <= 'd0;
|
|
axi_almost_full <= 'd0;
|
|
axi_dwunf <= 'd0;
|
|
axi_almost_empty <= 'd0;
|
|
axi_dwovf <= 'd0;
|
|
end else begin
|
|
axi_addr_diff <= axi_addr_diff_s[7:0];
|
|
if (axi_addr_diff > BUF_THRESHOLD_HI) begin
|
|
axi_almost_full <= 1'b1;
|
|
axi_dwunf <= axi_almost_empty;
|
|
end else begin
|
|
axi_almost_full <= 1'b0;
|
|
axi_dwunf <= 1'b0;
|
|
end
|
|
if (axi_addr_diff < BUF_THRESHOLD_LO) begin
|
|
axi_almost_empty <= 1'b1;
|
|
axi_dwovf <= axi_almost_full;
|
|
end else begin
|
|
axi_almost_empty <= 1'b0;
|
|
axi_dwovf <= 1'b0;
|
|
end
|
|
end
|
|
end
|
|
|
|
// transfer request is required to keep things in sync
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_xfer_req_m <= 'd0;
|
|
axi_xfer_init <= 'd0;
|
|
end else begin
|
|
axi_xfer_req_m <= {axi_xfer_req_m[1:0], dma_xfer_req};
|
|
axi_xfer_init <= axi_xfer_req_m[1] & ~axi_xfer_req_m[2];
|
|
end
|
|
end
|
|
|
|
// read is initiated if xfer enabled
|
|
|
|
assign axi_wready_s = ~axi_wvalid | axi_wready;
|
|
assign axi_rd_s = (axi_rel_waddr == axi_raddr) ? 1'b0 : axi_wready_s;
|
|
assign axi_req_s = (axi_raddr[1:0] == 2'h0) ? axi_rd_s : 1'b0;
|
|
assign axi_rlast_s = (axi_raddr[1:0] == 2'h3) ? axi_rd_s : 1'b0;
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_raddr <= 'd0;
|
|
axi_rd <= 'd0;
|
|
axi_rlast <= 'd0;
|
|
axi_rd_d <= 'd0;
|
|
axi_rlast_d <= 'd0;
|
|
axi_rdata_d <= 'd0;
|
|
end else begin
|
|
if (axi_rd_s == 1'b1) begin
|
|
axi_raddr <= axi_raddr + 1'b1;
|
|
end
|
|
axi_rd <= axi_rd_s;
|
|
axi_rlast <= axi_rlast_s;
|
|
axi_rd_d <= axi_rd;
|
|
axi_rlast_d <= axi_rlast;
|
|
axi_rdata_d <= axi_rdata_s;
|
|
end
|
|
end
|
|
|
|
// send read request for every burst about to be completed
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_rd_req <= 'd0;
|
|
axi_rd_addr <= 'd0;
|
|
end else begin
|
|
axi_rd_req <= axi_rlast_s;
|
|
if (axi_xfer_init == 1'b1) begin
|
|
axi_rd_addr <= AXI_ADDRESS;
|
|
end else if (axi_rd_req == 1'b1) begin
|
|
axi_rd_addr <= axi_rd_addr + AXI_AWINCR;
|
|
end
|
|
end
|
|
end
|
|
|
|
// address channel
|
|
|
|
assign axi_awid = 4'b0000;
|
|
assign axi_awburst = 2'b01;
|
|
assign axi_awlock = 1'b0;
|
|
assign axi_awcache = 4'b0010;
|
|
assign axi_awprot = 3'b000;
|
|
assign axi_awqos = 4'b0000;
|
|
assign axi_awuser = 4'b0001;
|
|
assign axi_awlen = AXI_LENGTH - 1;
|
|
assign axi_awsize = AXI_SIZE;
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_awvalid <= 'd0;
|
|
axi_awaddr <= 'd0;
|
|
end else begin
|
|
if (axi_awvalid == 1'b1) begin
|
|
if (axi_awready == 1'b1) begin
|
|
axi_awvalid <= 1'b0;
|
|
end
|
|
end else begin
|
|
if (axi_req_s == 1'b1) begin
|
|
axi_awvalid <= 1'b1;
|
|
end
|
|
end
|
|
if (axi_xfer_init == 1'b1) begin
|
|
axi_awaddr <= AXI_ADDRESS;
|
|
end else if ((axi_awvalid == 1'b1) && (axi_awready == 1'b1)) begin
|
|
axi_awaddr <= axi_awaddr + AXI_AWINCR;
|
|
end
|
|
end
|
|
end
|
|
|
|
// write channel
|
|
|
|
assign axi_wstrb = {AXI_BYTE_WIDTH{1'b1}};
|
|
assign axi_wuser = 4'b0000;
|
|
|
|
// response channel
|
|
|
|
assign axi_bready = 1'b1;
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_werror <= 'd0;
|
|
end else begin
|
|
axi_werror <= axi_bvalid & axi_bready & axi_bresp[1];
|
|
end
|
|
end
|
|
|
|
// fifo needs a reset
|
|
|
|
always @(posedge axi_clk or negedge axi_resetn) begin
|
|
if (axi_resetn == 1'b0) begin
|
|
axi_reset <= 1'b1;
|
|
end else begin
|
|
axi_reset <= 1'b0;
|
|
end
|
|
end
|
|
|
|
// interface handler
|
|
|
|
ad_axis_inf_rx #(.DATA_WIDTH(AXI_DATA_WIDTH)) i_axis_inf (
|
|
.clk (axi_clk),
|
|
.rst (axi_reset),
|
|
.valid (axi_rd_d),
|
|
.last (axi_rlast_d),
|
|
.data (axi_rdata_d),
|
|
.inf_valid (axi_wvalid),
|
|
.inf_last (axi_wlast),
|
|
.inf_data (axi_wdata),
|
|
.inf_ready (axi_wready));
|
|
|
|
// buffer
|
|
|
|
ad_mem #(.DATA_WIDTH(AXI_DATA_WIDTH), .ADDRESS_WIDTH(8)) i_mem (
|
|
.clka (adc_clk),
|
|
.wea (adc_wr),
|
|
.addra (adc_waddr),
|
|
.dina (adc_wdata),
|
|
.clkb (axi_clk),
|
|
.addrb (axi_raddr),
|
|
.doutb (axi_rdata_s));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|