pluto_hdl_adi/library/xilinx/common/ad_serdes_clk.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// serial data output interface: serdes(x8)

`timescale 1ps/1ps

module ad_serdes_clk #(

  parameter       DEVICE_TYPE = 0,
  parameter       DDR_OR_SDR_N = 1,
  parameter       CLKIN_DS_OR_SE_N = 1,
  parameter       SERDES_FACTOR = 8,
  parameter       MMCM_OR_BUFR_N = 1,
  parameter       MMCM_CLKIN_PERIOD  = 1.667,
  parameter       MMCM_VCO_DIV  = 6,
  parameter       MMCM_VCO_MUL = 12.000,
  parameter       MMCM_CLK0_DIV = 2.000,
  parameter       MMCM_CLK1_DIV = 6) (

  // clock and divided clock

  input           rst,
  input           clk_in_p,
  input           clk_in_n,
  output          clk,
  output          div_clk,
  output          out_clk,
  output          loaden,
  output  [ 7:0]  phase,

  // drp interface

  input           up_clk,
  input           up_rstn,
  input           up_drp_sel,
  input           up_drp_wr,
  input   [11:0]  up_drp_addr,
  input   [31:0]  up_drp_wdata,
  output  [31:0]  up_drp_rdata,
  output          up_drp_ready,
  output          up_drp_locked);

  localparam BUFR_DIVIDE = (DDR_OR_SDR_N == 1'b1) ? SERDES_FACTOR / 2 : SERDES_FACTOR;

  // internal signals

  wire            clk_in_s;

  // defaults

  assign loaden = 'd0;
  assign phase = 'd0;
  assign up_drp_rdata[31:16] = 'd0;

  // instantiations

  generate
  if (CLKIN_DS_OR_SE_N == 1'b1) begin
  IBUFGDS i_clk_in_ibuf (
    .I (clk_in_p),
    .IB (clk_in_n),
    .O (clk_in_s));
  end else begin
  IBUF IBUF_inst (
      .O(clk_in_s),
      .I(clk_in_p));
  end
  endgenerate

  generate
  if (MMCM_OR_BUFR_N == 1) begin
  ad_mmcm_drp #(
    .MMCM_DEVICE_TYPE (DEVICE_TYPE),
    .MMCM_CLKIN_PERIOD (MMCM_CLKIN_PERIOD),
    .MMCM_CLKIN2_PERIOD (MMCM_CLKIN_PERIOD),
    .MMCM_VCO_DIV (MMCM_VCO_DIV),
    .MMCM_VCO_MUL (MMCM_VCO_MUL),
    .MMCM_CLK0_DIV (MMCM_CLK0_DIV),
    .MMCM_CLK0_PHASE (0.0),
    .MMCM_CLK1_DIV (MMCM_CLK1_DIV),
    .MMCM_CLK1_PHASE (0.0),
    .MMCM_CLK2_DIV (MMCM_CLK0_DIV),
    .MMCM_CLK2_PHASE (90.0))
  i_mmcm_drp (
    .clk (clk_in_s),
    .clk2 (1'b0),
    .clk_sel (1'b1),
    .mmcm_rst (rst),
    .mmcm_clk_0 (clk),
    .mmcm_clk_1 (div_clk),
    .mmcm_clk_2 (out_clk),
    .up_clk (up_clk),
    .up_rstn (up_rstn),
    .up_drp_sel (up_drp_sel),
    .up_drp_wr (up_drp_wr),
    .up_drp_addr (up_drp_addr),
    .up_drp_wdata (up_drp_wdata[15:0]),
    .up_drp_rdata (up_drp_rdata[15:0]),
    .up_drp_ready (up_drp_ready),
    .up_drp_locked (up_drp_locked));
  end

  if (MMCM_OR_BUFR_N == 0) begin
  BUFIO i_clk_buf (
    .I (clk_in_s),
    .O (clk));

  BUFR #(.BUFR_DIVIDE(BUFR_DIVIDE)) i_div_clk_buf (
    .CLR (1'b0),
    .CE (1'b1),
    .I (clk_in_s),
    .O (div_clk));

  assign out_clk = clk;
  assign up_drp_rdata[15:0] = 'd0;
  assign up_drp_ready = 'd0;
  assign up_drp_locked = 'd0;

  end
  endgenerate

endmodule

// ***************************************************************************
// ***************************************************************************