214 lines
6.7 KiB
Verilog
214 lines
6.7 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
|
|
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
|
|
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
// USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_ad9434_if #(
|
|
|
|
parameter DEVICE_TYPE = 0,
|
|
parameter IO_DELAY_GROUP = "dev_if_delay_group") (
|
|
|
|
// device interface
|
|
input adc_clk_in_p,
|
|
input adc_clk_in_n,
|
|
input [11:0] adc_data_in_p,
|
|
input [11:0] adc_data_in_n,
|
|
input adc_or_in_p,
|
|
input adc_or_in_n,
|
|
|
|
// interface outputs
|
|
output [47:0] adc_data,
|
|
output adc_or,
|
|
|
|
// internl reset and clocks
|
|
output adc_clk,
|
|
input adc_rst,
|
|
output reg adc_status,
|
|
|
|
// delay interface (for IDELAY macros)
|
|
input up_clk,
|
|
input [12:0] up_adc_dld,
|
|
input [64:0] up_adc_dwdata,
|
|
output [64:0] up_adc_drdata,
|
|
input delay_clk,
|
|
input delay_rst,
|
|
output delay_locked,
|
|
|
|
// mmcm reset
|
|
input mmcm_rst,
|
|
|
|
// drp interface for MMCM_OR_BUFR_N
|
|
input up_rstn,
|
|
input up_drp_sel,
|
|
input up_drp_wr,
|
|
input [11:0] up_drp_addr,
|
|
input [31:0] up_drp_wdata,
|
|
output [31:0] up_drp_rdata,
|
|
output up_drp_ready,
|
|
output up_drp_locked);
|
|
|
|
|
|
localparam SDR = 0;
|
|
|
|
// internal registers
|
|
|
|
reg adc_status_m1 = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire [3:0] adc_or_s;
|
|
|
|
wire adc_clk_in;
|
|
wire adc_div_clk;
|
|
|
|
genvar l_inst;
|
|
|
|
// output assignment for adc clock (1:4 of the sampling clock)
|
|
assign adc_clk = adc_div_clk;
|
|
|
|
// data interface
|
|
ad_serdes_in #(
|
|
.DEVICE_TYPE(DEVICE_TYPE),
|
|
.IODELAY_CTRL(0),
|
|
.IODELAY_GROUP(IO_DELAY_GROUP),
|
|
.DDR_OR_SDR_N(SDR),
|
|
.DATA_WIDTH(12))
|
|
i_adc_data (
|
|
.rst(adc_rst),
|
|
.clk(adc_clk_in),
|
|
.div_clk(adc_div_clk),
|
|
.loaden(1'b0),
|
|
.phase(8'b0),
|
|
.locked(1'b0),
|
|
.data_s0(adc_data[47:36]),
|
|
.data_s1(adc_data[35:24]),
|
|
.data_s2(adc_data[23:12]),
|
|
.data_s3(adc_data[11: 0]),
|
|
.data_s4(),
|
|
.data_s5(),
|
|
.data_s6(),
|
|
.data_s7(),
|
|
.data_in_p(adc_data_in_p),
|
|
.data_in_n(adc_data_in_n),
|
|
.up_clk (up_clk),
|
|
.up_dld (up_adc_dld[11:0]),
|
|
.up_dwdata (up_adc_dwdata[59:0]),
|
|
.up_drdata (up_adc_drdata[59:0]),
|
|
.delay_clk(delay_clk),
|
|
.delay_rst(delay_rst),
|
|
.delay_locked());
|
|
|
|
// over-range interface
|
|
ad_serdes_in #(
|
|
.DEVICE_TYPE(DEVICE_TYPE),
|
|
.IODELAY_CTRL(1),
|
|
.IODELAY_GROUP(IO_DELAY_GROUP),
|
|
.DDR_OR_SDR_N(SDR),
|
|
.DATA_WIDTH(1))
|
|
i_adc_or (
|
|
.rst(adc_rst),
|
|
.clk(adc_clk_in),
|
|
.div_clk(adc_div_clk),
|
|
.loaden(1'b0),
|
|
.phase(8'b0),
|
|
.locked(1'b0),
|
|
.data_s0(adc_or_s[3]),
|
|
.data_s1(adc_or_s[2]),
|
|
.data_s2(adc_or_s[1]),
|
|
.data_s3(adc_or_s[0]),
|
|
.data_s4(),
|
|
.data_s5(),
|
|
.data_s6(),
|
|
.data_s7(),
|
|
.data_in_p(adc_or_in_p),
|
|
.data_in_n(adc_or_in_n),
|
|
.up_clk (up_clk),
|
|
.up_dld (up_adc_dld[12]),
|
|
.up_dwdata (up_adc_dwdata[64:60]),
|
|
.up_drdata (up_adc_drdata[64:60]),
|
|
.delay_clk(delay_clk),
|
|
.delay_rst(delay_rst),
|
|
.delay_locked(delay_locked));
|
|
|
|
// clock input buffers and MMCM_OR_BUFR_N
|
|
ad_serdes_clk #(
|
|
.DEVICE_TYPE (DEVICE_TYPE),
|
|
.CLKIN_DS_OR_SE_N (1),
|
|
.MMCM_OR_BUFR_N (1),
|
|
.MMCM_CLKIN_PERIOD (2),
|
|
.MMCM_VCO_DIV (6),
|
|
.MMCM_VCO_MUL (12),
|
|
.MMCM_CLK0_DIV (2),
|
|
.MMCM_CLK1_DIV (8))
|
|
i_serdes_clk (
|
|
.rst (mmcm_rst),
|
|
.clk_in_p (adc_clk_in_p),
|
|
.clk_in_n (adc_clk_in_n),
|
|
.clk (adc_clk_in),
|
|
.div_clk (adc_div_clk),
|
|
.out_clk (),
|
|
.loaden (),
|
|
.phase (),
|
|
.up_clk (up_clk),
|
|
.up_rstn (up_rstn),
|
|
.up_drp_sel (up_drp_sel),
|
|
.up_drp_wr (up_drp_wr),
|
|
.up_drp_addr (up_drp_addr),
|
|
.up_drp_wdata (up_drp_wdata),
|
|
.up_drp_rdata (up_drp_rdata),
|
|
.up_drp_ready (up_drp_ready),
|
|
.up_drp_locked (up_drp_locked));
|
|
|
|
// adc over range
|
|
assign adc_or = adc_or_s[0] | adc_or_s[1] | adc_or_s[2] | adc_or_s[3];
|
|
|
|
// adc status: adc is up, if both the MMCM_OR_BUFR_N and DELAY blocks are up
|
|
always @(posedge adc_div_clk) begin
|
|
if(adc_rst == 1'b1) begin
|
|
adc_status_m1 <= 1'b0;
|
|
adc_status <= 1'b0;
|
|
end else begin
|
|
adc_status_m1 <= up_drp_locked & delay_locked;
|
|
adc_status <= adc_status_m1;
|
|
end
|
|
end
|
|
|
|
endmodule
|