pluto_hdl_adi/library/axi_ad9671/axi_ad9671.v

302 lines
10 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad9671 #(
parameter ID = 0,
parameter DEVICE_TYPE = 0,
parameter QUAD_OR_DUAL_N = 1) (
// jesd interface
// rx_clk is (line-rate/40)
input rx_clk,
input [ 3:0] rx_sof,
input rx_valid,
input [(64*QUAD_OR_DUAL_N)+63:0] rx_data,
output rx_ready,
// dma interface
output adc_clk,
output [ 7:0] adc_valid,
output [ 7:0] adc_enable,
output [127:0] adc_data,
input adc_dovf,
input adc_dunf,
input adc_sync_in,
output adc_sync_out,
input [ 3:0] adc_raddr_in,
output [ 3:0] adc_raddr_out,
// axi interface
input s_axi_aclk,
input s_axi_aresetn,
input s_axi_awvalid,
input [ 31:0] s_axi_awaddr,
input [ 2:0] s_axi_awprot,
output s_axi_awready,
input s_axi_wvalid,
input [ 31:0] s_axi_wdata,
input [ 3:0] s_axi_wstrb,
output s_axi_wready,
output s_axi_bvalid,
output [ 1:0] s_axi_bresp,
input s_axi_bready,
input s_axi_arvalid,
input [ 31:0] s_axi_araddr,
input [ 2:0] s_axi_arprot,
output s_axi_arready,
output s_axi_rvalid,
output [ 1:0] s_axi_rresp,
output [ 31:0] s_axi_rdata,
input s_axi_rready);
// internal registers
reg up_status_pn_err = 'd0;
reg up_status_pn_oos = 'd0;
reg up_status_or = 'd0;
reg [ 31:0] up_rdata = 'd0;
reg up_rack = 'd0;
reg up_wack = 'd0;
// internal clocks & resets
wire adc_rst;
wire up_rstn;
wire up_clk;
// internal signals
wire adc_status_s;
wire adc_sync_status_s;
wire adc_valid_s;
wire [ 15:0] adc_data_s[7:0];
wire [ 7:0] adc_or_s;
wire [ 7:0] up_adc_pn_err_s;
wire [ 7:0] up_adc_pn_oos_s;
wire [ 7:0] up_adc_or_s;
wire up_wreq_s;
wire [ 13:0] up_waddr_s;
wire [ 31:0] up_wdata_s;
wire up_rreq_s;
wire [ 13:0] up_raddr_s;
wire [ 31:0] up_rdata_s[8:0];
wire up_rack_s[8:0];
wire up_wack_s[8:0];
wire [ 31:0] adc_start_code;
wire adc_sync;
// signal name changes
assign rx_ready = 1'b1;
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_status_pn_err <= 'd0;
up_status_pn_oos <= 'd0;
up_status_or <= 'd0;
up_rdata <= 'd0;
up_rack <= 'd0;
up_wack <= 'd0;
end else begin
up_status_pn_err <= | up_adc_pn_err_s;
up_status_pn_oos <= | up_adc_pn_oos_s;
up_status_or <= | up_adc_or_s;
up_rdata <= up_rdata_s[0] | up_rdata_s[1] | up_rdata_s[2] | up_rdata_s[3] |
up_rdata_s[4] | up_rdata_s[5] | up_rdata_s[6] | up_rdata_s[7] | up_rdata_s[8];
up_rack <= up_rack_s[0] | up_rack_s[1] | up_rack_s[2] | up_rack_s[3] |
up_rack_s[4] | up_rack_s[5] | up_rack_s[6] | up_rack_s[7] | up_rack_s[8];
up_wack <= up_wack_s[0] | up_wack_s[1] | up_wack_s[2] | up_wack_s[3] |
up_wack_s[4] | up_wack_s[5] | up_wack_s[6] | up_wack_s[7] | up_wack_s[8];
end
end
// main (device interface)
axi_ad9671_if #(
.QUAD_OR_DUAL_N (QUAD_OR_DUAL_N),
.ID (ID),
.DEVICE_TYPE (DEVICE_TYPE))
i_if (
.rx_clk (rx_clk),
.rx_data (rx_data),
.rx_sof (rx_sof),
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid_s),
.adc_data_a (adc_data_s[0]),
.adc_or_a (adc_or_s[0]),
.adc_data_b (adc_data_s[1]),
.adc_or_b (adc_or_s[1]),
.adc_data_c (adc_data_s[2]),
.adc_or_c (adc_or_s[2]),
.adc_data_d (adc_data_s[3]),
.adc_or_d (adc_or_s[3]),
.adc_data_e (adc_data_s[4]),
.adc_or_e (adc_or_s[4]),
.adc_data_f (adc_data_s[5]),
.adc_or_f (adc_or_s[5]),
.adc_data_g (adc_data_s[6]),
.adc_or_g (adc_or_s[6]),
.adc_data_h (adc_data_s[7]),
.adc_or_h (adc_or_s[7]),
.adc_start_code (adc_start_code),
.adc_sync (adc_sync),
.adc_sync_in (adc_sync_in),
.adc_sync_out (adc_sync_out),
.adc_sync_status (adc_sync_status_s),
.adc_status (adc_status_s),
.adc_raddr_in (adc_raddr_in),
.adc_raddr_out (adc_raddr_out));
// channels
genvar n;
generate
for (n = 0; n < 8; n = n + 1) begin: g_channel
axi_ad9671_channel #(.CHANNEL_ID(n)) i_channel (
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_valid (adc_valid_s),
.adc_data (adc_data_s[n]),
.adc_or (adc_or_s[n]),
.adc_dfmt_valid (adc_valid[n]),
.adc_dfmt_data (adc_data[(n*16)+15:(n*16)]),
.adc_enable (adc_enable[n]),
.up_adc_pn_err (up_adc_pn_err_s[n]),
.up_adc_pn_oos (up_adc_pn_oos_s[n]),
.up_adc_or (up_adc_or_s[n]),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[n]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[n]),
.up_rack (up_rack_s[n]));
end
endgenerate
// common processor control
up_adc_common #(.ID (ID)) i_up_adc_common (
.mmcm_rst (),
.adc_clk (adc_clk),
.adc_rst (adc_rst),
.adc_r1_mode (),
.adc_ddr_edgesel (),
.adc_pin_mode (),
.adc_status (adc_status_s),
.adc_sync_status (adc_sync_status_s),
.adc_status_ovf (adc_dovf),
.adc_status_unf (adc_dunf),
.adc_clk_ratio (32'd1),
.adc_start_code (adc_start_code),
.adc_sync (adc_sync),
.up_status_pn_err (up_status_pn_err),
.up_status_pn_oos (up_status_pn_oos),
.up_status_or (up_status_or),
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
.up_drp_rdata (32'd0),
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.up_usr_chanmax (),
.adc_usr_chanmax (8'd7),
.up_adc_gpio_in (32'd0),
.up_adc_gpio_out (),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_s[8]),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_s[8]),
.up_rack (up_rack_s[8]));
// up bus interface
up_axi i_up_axi (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_axi_awvalid (s_axi_awvalid),
.up_axi_awaddr (s_axi_awaddr),
.up_axi_awready (s_axi_awready),
.up_axi_wvalid (s_axi_wvalid),
.up_axi_wdata (s_axi_wdata),
.up_axi_wstrb (s_axi_wstrb),
.up_axi_wready (s_axi_wready),
.up_axi_bvalid (s_axi_bvalid),
.up_axi_bresp (s_axi_bresp),
.up_axi_bready (s_axi_bready),
.up_axi_arvalid (s_axi_arvalid),
.up_axi_araddr (s_axi_araddr),
.up_axi_arready (s_axi_arready),
.up_axi_rvalid (s_axi_rvalid),
.up_axi_rresp (s_axi_rresp),
.up_axi_rdata (s_axi_rdata),
.up_axi_rready (s_axi_rready),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata),
.up_rack (up_rack));
endmodule
// ***************************************************************************
// ***************************************************************************