pluto_hdl_adi/library/axi_gpreg/axi_gpreg_clock_mon.v

133 lines
3.6 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory of
// the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_gpreg_clock_mon #(
parameter ID = 0,
parameter BUF_ENABLE = 0) (
// clock
input d_clk,
// bus interface
input up_rstn,
input up_clk,
input up_wreq,
input [13:0] up_waddr,
input [31:0] up_wdata,
output reg up_wack,
input up_rreq,
input [13:0] up_raddr,
output reg [31:0] up_rdata,
output reg up_rack);
// internal registers
reg up_d_preset = 'd0;
reg up_d_resetn = 'd0;
// internal signals
wire up_wreq_s;
wire up_rreq_s;
wire [31:0] up_d_count_s;
wire d_rst;
wire d_clk_g;
// decode block select
assign up_wreq_s = (up_waddr[13:4] == ID) ? up_wreq : 1'b0;
assign up_rreq_s = (up_raddr[13:4] == ID) ? up_rreq : 1'b0;
// processor write interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_d_preset <= 1'd1;
up_wack <= 'd0;
up_d_resetn <= 'd0;
end else begin
up_d_preset <= ~up_d_resetn;
up_wack <= up_wreq_s;
if ((up_wreq_s == 1'b1) && (up_waddr[3:0] == 4'h0)) begin
up_d_resetn <= up_wdata[0];
end
end
end
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_rack <= 'd0;
up_rdata <= 'd0;
end else begin
up_rack <= up_rreq_s;
if (up_rreq_s == 1'b1) begin
case (up_raddr[3:0])
4'b0000: up_rdata <= {31'd0, up_d_resetn};
4'b0010: up_rdata <= up_d_count_s;
default: up_rdata <= 32'd0;
endcase
end else begin
up_rdata <= 32'd0;
end
end
end
// clock monitor
up_clock_mon i_clock_mon (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_d_count (up_d_count_s),
.d_rst (d_rst),
.d_clk (d_clk_g));
ad_rst i_d_rst_reg (
.preset (up_d_preset),
.clk (d_clk_g),
.rst (d_rst));
generate
if (BUF_ENABLE == 1) begin
BUFG i_bufg (
.I (d_clk),
.O (d_clk_g));
end else begin
assign d_clk_g = d_clk;
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************