pluto_hdl_adi/library/xilinx/axi_adxcvr/axi_adxcvr_mstatus.v

78 lines
2.6 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory of
// the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module axi_adxcvr_mstatus (
input up_rstn,
input up_clk,
input up_pll_locked_in,
input up_rst_done_in,
input up_pll_locked,
input up_rst_done,
output up_pll_locked_out,
output up_rst_done_out);
// parameters
parameter integer XCVR_ID = 0;
parameter integer NUM_OF_LANES = 8;
// internal registers
reg up_pll_locked_int = 'd0;
reg up_rst_done_int = 'd0;
// internal signals
wire up_pll_locked_s;
wire up_rst_done_s;
// daisy-chain the signals
assign up_pll_locked_out = up_pll_locked_int;
assign up_rst_done_out = up_rst_done_int;
assign up_pll_locked_s = (XCVR_ID < NUM_OF_LANES) ? up_pll_locked : 1'b1;
assign up_rst_done_s = (XCVR_ID < NUM_OF_LANES) ? up_rst_done : 1'b1;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_pll_locked_int <= 1'd0;
up_rst_done_int <= 1'd0;
end else begin
up_pll_locked_int <= up_pll_locked_in & up_pll_locked_s;
up_rst_done_int <= up_rst_done_in & up_rst_done_s;
end
end
endmodule
// ***************************************************************************
// ***************************************************************************