zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/xilinx/axi_dacfifo/axi_dacfifo_wr.v

498 lines
18 KiB
Verilog
Raw Blame History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_dacfifo_wr #(
parameter AXI_DATA_WIDTH = 512,
parameter DMA_DATA_WIDTH = 64,
parameter AXI_SIZE = 6,
parameter AXI_LENGTH = 15,
parameter AXI_ADDRESS = 32'h00000000,
parameter AXI_ADDRESS_LIMIT = 32'h00000000,
parameter DMA_MEM_ADDRESS_WIDTH = 8) (
// dma fifo interface
input dma_clk,
input [(DMA_DATA_WIDTH-1):0] dma_data,
input dma_ready,
output reg dma_ready_out,
input dma_valid,
// request and syncronizaiton
input dma_xfer_req,
input dma_xfer_last,
output reg [ 3:0] dma_last_beats,
// syncronization for the read side
output reg [31:0] axi_last_addr,
output reg [ 3:0] axi_last_beats,
output reg axi_xfer_out,
// axi write address, write data and write response channels
input axi_clk,
input axi_resetn,
output reg axi_awvalid,
output [ 3:0] axi_awid,
output [ 1:0] axi_awburst,
output axi_awlock,
output [ 3:0] axi_awcache,
output [ 2:0] axi_awprot,
output [ 3:0] axi_awqos,
output [ 3:0] axi_awuser,
output [ 7:0] axi_awlen,
output [ 2:0] axi_awsize,
output reg [31:0] axi_awaddr,
input axi_awready,
output axi_wvalid,
output [(AXI_DATA_WIDTH-1):0] axi_wdata,
output [(AXI_BYTE_WIDTH-1):0] axi_wstrb,
output axi_wlast,
output [ 3:0] axi_wuser,
input axi_wready,
input axi_bvalid,
input [ 3:0] axi_bid,
input [ 1:0] axi_bresp,
input [ 3:0] axi_buser,
output axi_bready,
output reg axi_werror);
localparam MEM_RATIO = AXI_DATA_WIDTH/DMA_DATA_WIDTH; // Max supported MEM_RATIO is 16
localparam AXI_MEM_ADDRESS_WIDTH = (MEM_RATIO == 1) ? DMA_MEM_ADDRESS_WIDTH :
(MEM_RATIO == 2) ? (DMA_MEM_ADDRESS_WIDTH - 1) :
(MEM_RATIO == 4) ? (DMA_MEM_ADDRESS_WIDTH - 2) :
(MEM_RATIO == 8) ? (DMA_MEM_ADDRESS_WIDTH - 3) :
(DMA_MEM_ADDRESS_WIDTH - 4);
localparam AXI_BYTE_WIDTH = AXI_DATA_WIDTH/8;
localparam DMA_BYTE_WIDTH = DMA_DATA_WIDTH/8;
localparam AXI_AWINCR = (AXI_LENGTH + 1) * AXI_BYTE_WIDTH;
localparam DMA_BUF_THRESHOLD_HI = {(DMA_MEM_ADDRESS_WIDTH){1'b1}} - 4;
// registers
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr_g = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_addr_diff = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m1 = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m2 = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr = 'd0;
reg dma_rst_m1 = 1'b0;
reg dma_rst_m2 = 1'b0;
reg [ 2:0] dma_mem_last_read_toggle_m = 3'b0;
reg [ 1:0] dma_xfer_req_d = 2'b0;
reg [ 4:0] axi_xfer_req_m = 3'b0;
reg [ 4:0] axi_xfer_last_m = 3'b0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m1 = 'b0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m2 = 'b0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr = 'b0;
reg axi_mem_rvalid = 1'b0;
reg axi_mem_rvalid_d = 1'b0;
reg axi_mem_last = 1'b0;
reg axi_mem_last_d = 1'b0;
reg [(AXI_DATA_WIDTH-1):0] axi_mem_rdata = 'b0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr_g = 'd0;
reg axi_mem_read_en = 1'b0;
reg axi_mem_read_en_d = 1'b0;
reg axi_mem_read_en_delay = 1'b0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_addr_diff = 'b0;
reg axi_mem_last_read_toggle = 1'b0;
reg axi_reset = 1'b0;
reg axi_xfer_init = 1'b0;
reg [ 3:0] axi_wvalid_counter = 4'b0;
reg axi_endof_transaction = 1'b0;
reg axi_endof_transaction_d = 1'b0;
// internal signals
wire [(DMA_MEM_ADDRESS_WIDTH):0] dma_mem_addr_diff_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_s;
wire dma_mem_last_read_s;
wire dma_xfer_init;
wire dma_mem_wea_s;
wire dma_rst_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr_b2g_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m2_g2b_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_s;
wire [AXI_MEM_ADDRESS_WIDTH:0] axi_mem_addr_diff_s;
wire [(AXI_DATA_WIDTH-1):0] axi_mem_rdata_s;
wire axi_mem_rvalid_s;
wire axi_mem_last_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m2_g2b_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr_b2g_s;
wire axi_waddr_ready_s;
wire axi_wready_s;
// Instantiations
// An asymmetric memory to transfer data from DMAC interface to AXI Memory Map
// interface
ad_mem_asym #(
.A_ADDRESS_WIDTH (DMA_MEM_ADDRESS_WIDTH),
.A_DATA_WIDTH (DMA_DATA_WIDTH),
.B_ADDRESS_WIDTH (AXI_MEM_ADDRESS_WIDTH),
.B_DATA_WIDTH (AXI_DATA_WIDTH))
i_mem_asym (
.clka (dma_clk),
.wea (dma_mem_wea_s),
.addra (dma_mem_waddr),
.dina (dma_data),
.clkb (axi_clk),
.addrb (axi_mem_raddr),
.doutb (axi_mem_rdata_s));
ad_axis_inf_rx #(.DATA_WIDTH(AXI_DATA_WIDTH)) i_axis_inf (
.clk (axi_clk),
.rst (axi_reset),
.valid (axi_mem_rvalid_d),
.last (axi_mem_last_d),
.data (axi_mem_rdata),
.inf_valid (axi_wvalid),
.inf_last (axi_wlast),
.inf_data (axi_wdata),
.inf_ready (axi_wready));
// fifo needs a reset
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_reset <= 1'b1;
end else begin
axi_reset <= 1'b0;
end
end
always @(posedge dma_clk) begin
dma_rst_m1 <= ~axi_resetn;
dma_rst_m2 <= dma_rst_m1;
end
assign dma_rst_s = dma_rst_m2;
// DMA beat counter
assign dma_xfer_init = ~dma_xfer_req_d[1] & dma_xfer_req_d[0];
always @(posedge dma_clk) begin
dma_xfer_req_d <= {dma_xfer_req_d[0], dma_xfer_req};
if ((dma_rst_s == 1'b1) || (dma_xfer_init == 1'b1)) begin
dma_last_beats <= 4'b0;
end else begin
if ((dma_ready == 1'b1) && (dma_valid == 1'b1)) begin
dma_last_beats <= (dma_last_beats < MEM_RATIO-1) ? dma_last_beats + 4'b1 : 4'b0;
end
end
end
// Write address generation for the asymmetric memory
assign dma_mem_addr_diff_s = {1'b1, dma_mem_waddr} - dma_mem_raddr_s;
assign dma_mem_raddr_s = (MEM_RATIO == 1) ? dma_mem_raddr :
(MEM_RATIO == 2) ? {dma_mem_raddr, 1'b0} :
(MEM_RATIO == 4) ? {dma_mem_raddr, 2'b0} :
(MEM_RATIO == 8) ? {dma_mem_raddr, 3'b0} :
{dma_mem_raddr, 4'b0};
assign dma_mem_last_read_s = dma_mem_last_read_toggle_m[2] ^ dma_mem_last_read_toggle_m[1];
assign dma_mem_wea_s = dma_xfer_req & dma_valid & dma_ready;
always @(posedge dma_clk) begin
if ((dma_rst_s == 1'b1) || (dma_xfer_init == 1'b1)) begin
dma_mem_waddr <= 'h0;
dma_mem_waddr_g <= 'h0;
dma_mem_last_read_toggle_m <= 3'b0;
end else begin
dma_mem_last_read_toggle_m = {dma_mem_last_read_toggle_m[1:0], axi_mem_last_read_toggle};
if (dma_mem_wea_s == 1'b1) begin
dma_mem_waddr <= dma_mem_waddr + 1;
if (dma_xfer_last == 1'b1) begin
if (dma_last_beats != (MEM_RATIO - 1)) begin
dma_mem_waddr <= dma_mem_waddr + (MEM_RATIO - dma_last_beats);
end
end
end
if (dma_mem_last_read_s == 1'b1) begin
dma_mem_waddr <= 'h0;
end
dma_mem_waddr_g <= dma_mem_waddr_b2g_s;
end
end
ad_b2g # (
.DATA_WIDTH(DMA_MEM_ADDRESS_WIDTH)
) i_dma_mem_waddr_b2g (
.din (dma_mem_waddr),
.dout (dma_mem_waddr_b2g_s));
// The memory module request data until reaches the high threshold.
always @(posedge dma_clk) begin
if ((dma_rst_s == 1'b1) || (dma_xfer_init == 1'b1)) begin
dma_mem_addr_diff <= 'b0;
dma_mem_raddr_m1 <= 'b0;
dma_mem_raddr_m2 <= 'b0;
dma_mem_raddr <= 'b0;
dma_ready_out <= 1'b1;
end else begin
dma_mem_raddr_m1 <= axi_mem_raddr_g;
dma_mem_raddr_m2 <= dma_mem_raddr_m1;
dma_mem_raddr <= dma_mem_raddr_m2_g2b_s;
dma_mem_addr_diff <= dma_mem_addr_diff_s[DMA_MEM_ADDRESS_WIDTH-1:0];
if (dma_mem_addr_diff >= DMA_BUF_THRESHOLD_HI) begin
dma_ready_out <= 1'b0;
end else begin
dma_ready_out <= 1'b1;
end
end
end
ad_g2b # (
.DATA_WIDTH(AXI_MEM_ADDRESS_WIDTH)
) i_dma_mem_raddr_g2b (
.din (dma_mem_raddr_m2),
.dout (dma_mem_raddr_m2_g2b_s));
// Read address generation for the asymmetric memory
// CDC for the memory write address, xfer_req and xfer_last
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_xfer_req_m <= 4'b0;
axi_xfer_last_m <= 5'b0;
axi_xfer_init <= 1'b0;
axi_mem_waddr_m1 <= 'b0;
axi_mem_waddr_m2 <= 'b0;
axi_mem_waddr <= 'b0;
end else begin
axi_xfer_req_m <= {axi_xfer_req_m[3:0], dma_xfer_req};
axi_xfer_last_m <= {axi_xfer_last_m[3:0], dma_xfer_last};
axi_xfer_init = ~axi_xfer_req_m[2] & axi_xfer_req_m[1];
axi_mem_waddr_m1 <= dma_mem_waddr_g;
axi_mem_waddr_m2 <= axi_mem_waddr_m1;
axi_mem_waddr <= axi_mem_waddr_m2_g2b_s;
end
end
ad_g2b # (
.DATA_WIDTH(DMA_MEM_ADDRESS_WIDTH)
) i_axi_mem_waddr_g2b (
.din (axi_mem_waddr_m2),
.dout (axi_mem_waddr_m2_g2b_s));
// check if the AXI write channel is ready
assign axi_wready_s = ~axi_wvalid | axi_wready;
// check if there is enough data in the asymmetric memory
assign axi_mem_waddr_s = (MEM_RATIO == 1) ? axi_mem_waddr :
(MEM_RATIO == 2) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):1] :
(MEM_RATIO == 4) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):2] :
(MEM_RATIO == 8) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):3] :
axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):4];
assign axi_mem_addr_diff_s = {1'b1, axi_mem_waddr_s} - axi_mem_raddr;
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_endof_transaction <= 1'b0;
axi_endof_transaction_d <= 1'b0;
end else begin
axi_endof_transaction_d <= axi_endof_transaction;
if ((axi_xfer_req_m[4] == 1'b1) && (axi_xfer_last_m[4] == 1'b1) && (axi_xfer_last_m[3] == 1'b0)) begin
axi_endof_transaction <= 1'b1;
end else if((axi_endof_transaction == 1'b1) && (axi_wlast == 1'b1) && ((axi_mem_addr_diff == 0) || (axi_mem_addr_diff > AXI_LENGTH))) begin
axi_endof_transaction <= 1'b0;
end
end
end
// The asymmetric memory have to have enough data for at least one AXI burst,
// before the controller start an AXI write transaction.
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_mem_read_en <= 1'b0;
axi_mem_read_en_d <= 1'b0;
axi_mem_read_en_delay <= 1'b0;
axi_mem_addr_diff <= 'b0;
end else begin
axi_mem_addr_diff <= axi_mem_addr_diff_s[(AXI_MEM_ADDRESS_WIDTH-1):0];
if ((axi_mem_read_en == 1'b0) && (axi_mem_read_en_delay == 1'b0)) begin
if (((axi_xfer_req_m[2] == 1'b1) && (axi_mem_addr_diff > AXI_LENGTH)) ||
((axi_endof_transaction == 1'b1) && (axi_mem_addr_diff > AXI_LENGTH)) ||
((axi_endof_transaction == 1'b1) && (axi_mem_addr_diff > 0))) begin
axi_mem_read_en <= 1'b1;
end
end else if (axi_mem_last_s == 1'b1) begin
axi_mem_read_en <= 1'b0;
axi_mem_read_en_delay <= 1;
end
if (axi_wlast == 1'b1) begin
axi_mem_read_en_delay <= 0;
end
axi_mem_read_en_d <= axi_mem_read_en;
end
end
assign axi_mem_rvalid_s = axi_mem_read_en & axi_wready_s;
assign axi_mem_last_s = (axi_wvalid_counter == axi_awlen) ? axi_mem_rvalid_s : 1'b0;
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_mem_rvalid <= 1'b0;
axi_mem_rvalid_d <= 1'b0;
axi_mem_last <= 1'b0;
axi_mem_last_d <= 1'b0;
axi_mem_rdata <= 'b0;
axi_mem_raddr <= 'b0;
axi_wvalid_counter <= 4'b0;
axi_mem_last_read_toggle <= 1'b1;
axi_mem_raddr_g <= 'b0;
end else begin
axi_mem_rvalid <= axi_mem_rvalid_s;
axi_mem_rvalid_d <= axi_mem_rvalid;
axi_mem_last <= axi_mem_last_s;
axi_mem_last_d <= axi_mem_last;
axi_mem_rdata <= axi_mem_rdata_s;
if (axi_mem_rvalid_s == 1'b1) begin
axi_mem_raddr <= axi_mem_raddr + 1;
axi_wvalid_counter <= ((axi_wvalid_counter == axi_awlen) || (axi_xfer_init == 1'b1)) ? 4'b0 : axi_wvalid_counter + 4'b1;
end
if ((axi_endof_transaction == 1'b0) && (axi_endof_transaction_d == 1'b1)) begin
axi_mem_raddr <= 'b0;
axi_mem_last_read_toggle <= ~axi_mem_last_read_toggle;
end
axi_mem_raddr_g <= axi_mem_raddr_b2g_s;
end
end
ad_b2g # (
.DATA_WIDTH(AXI_MEM_ADDRESS_WIDTH)
) i_axi_mem_raddr_b2g (
.din (axi_mem_raddr),
.dout (axi_mem_raddr_b2g_s));
// AXI Memory Map interface write address channel
assign axi_awid = 4'b0000;
assign axi_awburst = 2'b01;
assign axi_awlock = 1'b0;
assign axi_awcache = 4'b0010;
assign axi_awprot = 3'b000;
assign axi_awqos = 4'b0000;
assign axi_awuser = 4'b0001;
assign axi_awlen = AXI_LENGTH;
assign axi_awsize = AXI_SIZE;
assign axi_waddr_ready_s = axi_mem_read_en & ~axi_mem_read_en_d;
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_awvalid <= 'd0;
axi_awaddr <= AXI_ADDRESS;
axi_last_addr <= AXI_ADDRESS;
axi_xfer_out <= 1'b0;
end else begin
if (axi_awvalid == 1'b1) begin
if (axi_awready == 1'b1) begin
axi_awvalid <= 1'b0;
end
end else begin
if (axi_waddr_ready_s == 1'b1) begin
axi_awvalid <= 1'b1;
end
end
if (axi_xfer_init == 1'b1) begin
axi_awaddr <= (axi_xfer_out == 1'b1) ? AXI_ADDRESS : axi_last_addr;
axi_xfer_out <= 1'b0;
end else if ((axi_awvalid == 1'b1) && (axi_awready == 1'b1)) begin
axi_awaddr <= axi_awaddr + AXI_AWINCR;
end
if (axi_xfer_last_m[2] == 1'b1) begin
axi_xfer_out <= 1'b1;
end
if ((axi_awvalid == 1'b1) && (axi_endof_transaction == 1'b1)) begin
axi_last_addr <= axi_awaddr;
end
end
end
// write data channel controls
assign axi_wstrb = {AXI_BYTE_WIDTH{1'b1}};
assign axi_wuser = 4'b0000;
// response channel
assign axi_bready = 1'b1;
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_werror <= 'd0;
end else begin
axi_werror <= axi_bvalid & axi_bresp[1];
end
end
// AXI beat counter
always @(posedge axi_clk) begin
if(axi_resetn == 1'b0) begin
axi_last_beats <= 4'b0;
end else begin
if ((axi_endof_transaction == 1'b1) && (axi_awready == 1'b1) && (axi_awvalid == 1'b1)) begin
axi_last_beats <= axi_mem_addr_diff;
end else begin
axi_last_beats <= axi_last_beats;
end
end
end
endmodule
Reference in New Issue View Git Blame Copy Permalink