125 lines
3.5 KiB
Verilog
125 lines
3.5 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// Each core or library found in this collection may have its own licensing terms.
|
|
// The user should keep this in in mind while exploring these cores.
|
|
//
|
|
// Redistribution and use in source and binary forms,
|
|
// with or without modification of this file, are permitted under the terms of either
|
|
// (at the option of the user):
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory, or at:
|
|
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/1ns
|
|
|
|
module prcfg_adc #(
|
|
|
|
parameter CHANNEL_ID = 0) (
|
|
input clk,
|
|
|
|
// control ports
|
|
input [31:0] control,
|
|
output reg [31:0] status,
|
|
|
|
// FIFO interface
|
|
input src_adc_enable,
|
|
input src_adc_valid,
|
|
input [15:0] src_adc_data,
|
|
|
|
output reg dst_adc_enable,
|
|
output reg dst_adc_valid,
|
|
output reg [15:0] dst_adc_data);
|
|
|
|
localparam RP_ID = 8'hA1;
|
|
|
|
reg [15:0] adc_pn_data = 0;
|
|
|
|
reg [ 3:0] mode;
|
|
reg [ 3:0] channel_sel;
|
|
|
|
wire adc_dvalid;
|
|
wire [15:0] adc_pn_data_s;
|
|
wire adc_pn_oos_s;
|
|
wire adc_pn_err_s;
|
|
|
|
// prbs function
|
|
|
|
function [15:0] pn;
|
|
input [15:0] din;
|
|
reg [15:0] dout;
|
|
begin
|
|
dout[15] = din[14] ^ din[15];
|
|
dout[14] = din[13] ^ din[14];
|
|
dout[13] = din[12] ^ din[13];
|
|
dout[12] = din[11] ^ din[12];
|
|
dout[11] = din[10] ^ din[11];
|
|
dout[10] = din[ 9] ^ din[10];
|
|
dout[ 9] = din[ 8] ^ din[ 9];
|
|
dout[ 8] = din[ 7] ^ din[ 8];
|
|
dout[ 7] = din[ 6] ^ din[ 7];
|
|
dout[ 6] = din[ 5] ^ din[ 6];
|
|
dout[ 5] = din[ 4] ^ din[ 5];
|
|
dout[ 4] = din[ 3] ^ din[ 4];
|
|
dout[ 3] = din[ 2] ^ din[ 3];
|
|
dout[ 2] = din[ 1] ^ din[ 2];
|
|
dout[ 1] = din[ 0] ^ din[ 1];
|
|
dout[ 0] = din[14] ^ din[15] ^ din[ 0];
|
|
pn = dout;
|
|
end
|
|
endfunction
|
|
|
|
assign adc_dvalid = src_adc_enable & src_adc_valid;
|
|
|
|
always @(posedge clk) begin
|
|
channel_sel <= control[3:0];
|
|
mode <= control[7:4];
|
|
end
|
|
|
|
// prbs generation
|
|
always @(posedge clk) begin
|
|
if(adc_dvalid == 1'b1) begin
|
|
adc_pn_data <= pn(adc_pn_data_s);
|
|
end
|
|
end
|
|
|
|
assign adc_pn_data_s = (adc_pn_oos_s == 1'b1) ? src_adc_ddata : adc_pn_data;
|
|
|
|
ad_pnmon #(
|
|
.DATA_WIDTH(32)
|
|
) i_pn_mon (
|
|
.adc_clk(clk),
|
|
.adc_valid_in(adc_dvalid),
|
|
.adc_data_in(src_adc_ddata),
|
|
.adc_data_pn(adc_pn_data),
|
|
.adc_pn_oos(adc_pn_oos_s),
|
|
.adc_pn_err(adc_pn_err_s));
|
|
|
|
// rx path are passed through on test mode
|
|
always @(posedge clk) begin
|
|
dst_adc_enable <= src_adc_enable;
|
|
dst_adc_data <= src_adc_data;
|
|
dst_adc_valid <= src_adc_valid;
|
|
end
|
|
|
|
// setup status bits for gpio_out
|
|
always @(posedge clk) begin
|
|
if((mode == 3'd2) && (channel_sel == CHANNEL_ID)) begin
|
|
status <= {22'h0, adc_pn_err_s, adc_pn_oos_s, RP_ID};
|
|
end else begin
|
|
status <= {24'h0, RP_ID};
|
|
end
|
|
end
|
|
|
|
endmodule
|