pluto_hdl_adi/library/axi_ad6676/axi_ad6676_if.v

118 lines
3.6 KiB
Verilog
Executable File

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad6676_if #(
parameter DEVICE_TYPE = 0) (
// jesd interface
// rx_clk is (line-rate/40)
input rx_clk,
input [ 3:0] rx_sof,
input [63:0] rx_data,
// adc data output
output adc_clk,
input adc_rst,
output [31:0] adc_data_a,
output [31:0] adc_data_b,
output adc_or_a,
output adc_or_b,
output reg adc_status);
// internal registers
// internal signals
wire [15:0] adc_data_a_s1_s;
wire [15:0] adc_data_a_s0_s;
wire [15:0] adc_data_b_s1_s;
wire [15:0] adc_data_b_s0_s;
wire [63:0] rx_data_s;
// adc clock is the reference clock
assign adc_clk = rx_clk;
assign adc_or_a = 1'b0;
assign adc_or_b = 1'b0;
// adc channels
assign adc_data_a = {adc_data_a_s1_s, adc_data_a_s0_s};
assign adc_data_b = {adc_data_b_s1_s, adc_data_b_s0_s};
// data multiplex
assign adc_data_a_s1_s = {rx_data[23:16], rx_data[31:24]};
assign adc_data_a_s0_s = {rx_data[ 7: 0], rx_data[15: 8]};
assign adc_data_b_s1_s = {rx_data[55:48], rx_data[63:56]};
assign adc_data_b_s0_s = {rx_data[39:32], rx_data[47:40]};
// status
always @(posedge rx_clk) begin
if (adc_rst == 1'b1) begin
adc_status <= 1'b0;
end else begin
adc_status <= 1'b1;
end
end
// frame-alignment
genvar n;
generate
for (n = 0; n < 2; n = n + 1) begin: g_xcvr_if
ad_xcvr_rx_if #(.DEVICE_TYPE (DEVICE_TYPE)) i_xcvr_if (
.rx_clk (rx_clk),
.rx_ip_sof (rx_sof),
.rx_ip_data (rx_data[((n*32)+31):(n*32)]),
.rx_sof (),
.rx_data (rx_data_s[((n*32)+31):(n*32)]));
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************