pluto_hdl_adi/library/axi_ad9963/axi_ad9963_if.v

245 lines
6.3 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad9963_if #(
// this parameter controls the buffer type based on the target device.
parameter DEVICE_TYPE = 0,
parameter ADC_IODELAY_ENABLE = 0,
parameter IO_DELAY_GROUP = "dev_if_delay_group") (
// physical interface (receive)
input trx_clk,
input trx_iq,
input [11:0] trx_data,
// physical interface (transmit)
input tx_clk,
output tx_iq,
output [11:0] tx_data,
// clock (common to both receive and transmit)
input adc_rst,
input dac_rst,
output adc_clk,
output dac_clk,
// receive data path interface
output reg adc_valid,
output reg [23:0] adc_data,
output reg adc_status,
input up_adc_ce,
// transmit data path interface
input dac_valid,
input [23:0] dac_data,
input up_dac_ce,
// delay interface
input up_clk,
input [12:0] up_adc_dld,
input [64:0] up_adc_dwdata,
output [64:0] up_adc_drdata,
input delay_clk,
input delay_rst,
output delay_locked);
// internal registers
reg [11:0] rx_data_p = 0;
reg [11:0] tx_data_p = 'd0;
reg [11:0] tx_data_n = 'd0;
// internal signals
wire [11:0] rx_data_p_s;
wire [11:0] rx_data_n_s;
wire rx_iq_p_s;
wire rx_iq_n_s;
wire div_clk;
genvar l_inst;
always @(posedge adc_clk) begin
if( rx_iq_p_s == 1'b1) begin
adc_data <= {rx_data_n_s, rx_data_p_s} ; // data[11:00] I
adc_valid <= 1'b1; // data[23:12] Q
end else begin
rx_data_p <= rx_data_p_s; // if this happens it means that risedge data is sampled on falledge
adc_data <= {rx_data_p, rx_data_n_s}; // so we take current N data with previous P data
adc_valid <= 1'b1; // in order to have data sampled at the same instance sent to the DMA
end
end
always @(posedge dac_clk) begin
if(dac_valid == 1'b1) begin
tx_data_p <= dac_data[11:0] ;
tx_data_n <= dac_data[23:12];
end
end
always @(posedge adc_clk) begin
if (adc_rst == 1'b1) begin
adc_status <= 1'b0;
end else begin
adc_status <= 1'b1;
end
end
// device clock interface (receive clock)
BUFGCTRL #(
.INIT_OUT(0),
.PRESELECT_I0("FALSE"),
.PRESELECT_I1("FALSE")
)
bufgctrl_adc (
.O(adc_clk),
.CE0(1'b1),
.CE1(1'b0),
.I0(trx_clk),
.I1(1'b0),
.IGNORE0(1'b0),
.IGNORE1(1'b0),
.S0(up_adc_ce),
.S1(1'b0)
);
// receive data interface, ibuf -> idelay -> iddr
generate
for (l_inst = 0; l_inst <= 11; l_inst = l_inst + 1) begin: g_rx_data
ad_lvds_in #(
.SINGLE_ENDED (1),
.DEVICE_TYPE (DEVICE_TYPE),
.IODELAY_ENABLE (ADC_IODELAY_ENABLE),
.IODELAY_CTRL (0),
.IODELAY_GROUP (IO_DELAY_GROUP))
i_rx_data (
.rx_clk (adc_clk),
.rx_data_in_p (trx_data[l_inst]),
.rx_data_in_n (1'b0),
.rx_data_p (rx_data_p_s[l_inst]),
.rx_data_n (rx_data_n_s[l_inst]),
.up_clk (up_clk),
.up_dld (up_adc_dld[l_inst]),
.up_dwdata (up_adc_dwdata[((l_inst*5)+4):(l_inst*5)]),
.up_drdata (up_adc_drdata[((l_inst*5)+4):(l_inst*5)]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked ());
end
endgenerate
// receive iq interface, ibuf -> idelay -> iddr
ad_lvds_in #(
.SINGLE_ENDED (1),
.DEVICE_TYPE (DEVICE_TYPE),
.IODELAY_ENABLE (ADC_IODELAY_ENABLE),
.IODELAY_CTRL (1),
.IODELAY_GROUP (IO_DELAY_GROUP))
i_rx_iq (
.rx_clk (adc_clk),
.rx_data_in_p (trx_iq),
.rx_data_in_n (1'b0),
.rx_data_p (rx_iq_p_s),
.rx_data_n (rx_iq_n_s),
.up_clk (up_clk),
.up_dld (up_adc_dld[12]),
.up_dwdata (up_adc_dwdata[64:60]),
.up_drdata (up_adc_drdata[64:60]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked));
// transmit data interface
BUFR #(.BUFR_DIVIDE(2)) i_div_clk_buf (
.CLR (1'b0),
.CE (1'b1),
.I (tx_clk),
.O (div_clk));
BUFGCTRL #(
.INIT_OUT(0),
.PRESELECT_I0("FALSE"),
.PRESELECT_I1("FALSE")
)
bufgctrl_dac (
.O(dac_clk),
.CE0(1'b1),
.CE1(1'b0),
.I0(div_clk),
.I1(1'b0),
.IGNORE0(1'b0),
.IGNORE1(1'b0),
.S0(up_dac_ce),
.S1(1'b0)
);
generate
for (l_inst = 0; l_inst <= 11; l_inst = l_inst + 1) begin: g_tx_data
ODDR #(
.DDR_CLK_EDGE ("SAME_EDGE"),
.INIT (1'b0),
.SRTYPE ("SYNC"))
i_tx_data_oddr (
.CE (1'b1),
.R (dac_rst),
.S (1'b0),
.C (dac_clk),
.D1 (tx_data_p[l_inst]),
.D2 (tx_data_n[l_inst]),
.Q (tx_data[l_inst]));
end
endgenerate
ODDR #(
.DDR_CLK_EDGE ("SAME_EDGE"),
.INIT (1'b0),
.SRTYPE ("SYNC"))
i_tx_data_oddr (
.CE (1'b1),
.R (dac_rst),
.S (1'b0),
.C (dac_clk),
.D1 (1'b1),
.D2 (1'b0),
.Q (tx_iq));
endmodule
// ***************************************************************************
// ***************************************************************************