pluto_hdl_adi/library/axi_adrv9001/axi_adrv9001_tx.v

432 lines
13 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2020-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_adrv9001_tx #(
parameter ID = 0,
parameter ENABLED = 1,
parameter CMOS_LVDS_N = 0,
parameter USE_RX_CLK_FOR_TX = 0,
parameter COMMON_BASE_ADDR = 'h10,
parameter CHANNEL_BASE_ADDR = 'h11,
parameter MODE_R1 = 1,
parameter FPGA_TECHNOLOGY = 0,
parameter FPGA_FAMILY = 0,
parameter SPEED_GRADE = 0,
parameter DEV_PACKAGE = 0,
parameter EXT_SYNC = 0,
parameter DISABLE = 0,
parameter DDS_DISABLE = 0,
parameter IQCORRECTION_DISABLE = 0,
parameter DAC_DDS_TYPE = 1,
parameter DAC_DDS_CORDIC_DW = 20,
parameter DAC_DDS_CORDIC_PHASE_DW = 18
) (
// dac interface
output dac_rst,
input dac_clk,
output dac_data_valid_A,
output [15:0] dac_data_i_A,
output [15:0] dac_data_q_A,
output dac_data_valid_B,
output [15:0] dac_data_i_B,
output [15:0] dac_data_q_B,
output dac_single_lane,
output dac_sdr_ddr_n,
output dac_symb_op,
output dac_symb_8_16b,
output up_dac_r1_mode,
input tdd_tx_valid,
input [ 31:0] dac_clk_ratio,
// master/slave
input dac_sync_in,
output dac_sync_out,
output dac_ext_sync_arm,
// dma interface
output dac_valid,
output dac_enable_i0,
input [ 15:0] dac_data_i0,
output dac_enable_q0,
input [ 15:0] dac_data_q0,
output dac_enable_i1,
input [ 15:0] dac_data_i1,
output dac_enable_q1,
input [ 15:0] dac_data_q1,
input dac_dunf,
// processor interface
input up_rstn,
input up_clk,
input up_wreq,
input [ 13:0] up_waddr,
input [ 31:0] up_wdata,
output reg up_wack,
input up_rreq,
input [ 13:0] up_raddr,
output reg [ 31:0] up_rdata,
output reg up_rack
);
generate
if (ENABLED == 0) begin : core_disabled
assign dac_rst = 1'b0;
assign dac_data_valid_A = 1'b0;
assign dac_data_i_A = 16'b0;
assign dac_data_q_A = 16'b0;
assign dac_data_valid_B = 1'b0;
assign dac_data_i_B = 16'b0;
assign dac_data_q_B = 16'b0;
assign dac_single_lane = 1'b0;
assign dac_sdr_ddr_n = 1'b0;
assign dac_symb_op = 1'b0;
assign dac_symb_8_16b = 1'b0;
assign up_dac_r1_mode = 1'b0;
assign dac_sync_out = 1'b0;
assign dac_valid = 1'b0;
assign dac_enable_i0 = 1'b0;
assign dac_enable_q0 = 1'b0;
assign dac_enable_i1 = 1'b0;
assign dac_enable_q1 = 1'b0;
always @(*) begin
up_wack = 1'b0;
up_rdata = 32'b0;
up_rack = 1'b0;
end
end else begin : core_enabled
// configuration settings
localparam CONFIG = (USE_RX_CLK_FOR_TX * 1024) +
(CMOS_LVDS_N * 128) +
(MODE_R1 * 16) +
(DDS_DISABLE * 64) +
(IQCORRECTION_DISABLE * 1);
// internal registers
reg dac_data_sync = 'd0;
reg [15:0] dac_rate_cnt = 'd0;
reg dac_valid_int = 'd0;
// internal signals
wire dac_data_sync_s;
wire [ 15:0] dac_data_iq_i0_s;
wire [ 15:0] dac_data_iq_q0_s;
wire [ 15:0] dac_data_iq_i1_s;
wire [ 15:0] dac_data_iq_q1_s;
wire dac_dds_format_s;
wire [ 15:0] dac_datarate_s;
wire [4:0] dac_num_lanes;
wire [ 4:0] up_wack_s;
wire [ 4:0] up_rack_s;
wire [ 31:0] up_rdata_s[0:4];
// master/slave
assign dac_data_sync_s = (EXT_SYNC == 0) ? dac_sync_out : dac_sync_in;
always @(posedge dac_clk) begin
dac_data_sync <= dac_data_sync_s;
end
// rate counters and data sync signals
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_rate_cnt <= 16'b0;
end else begin
if ((dac_data_sync == 1'b1) || (dac_rate_cnt == 16'd0)) begin
dac_rate_cnt <= dac_datarate_s;
end else begin
dac_rate_cnt <= dac_rate_cnt - 1'b1;
end
end
end
// dma interface
assign dac_data_valid_A = dac_valid_int;
assign dac_data_valid_B = dac_valid_int;
always @(posedge dac_clk) begin
if (dac_rst == 1'b1) begin
dac_valid_int <= 1'b0;
end else begin
dac_valid_int <= (dac_rate_cnt == 16'd0) ? tdd_tx_valid : 1'b0;
end
end
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_wack <= 'd0;
up_rack <= 'd0;
up_rdata <= 'd0;
end else begin
up_wack <= | up_wack_s;
up_rack <= | up_rack_s;
up_rdata <= up_rdata_s[0] | up_rdata_s[1] | up_rdata_s[2] |
up_rdata_s[3] | up_rdata_s[4];
end
end
// dac channel 0
axi_adrv9001_tx_channel #(
.CHANNEL_ID (0),
.COMMON_ID (CHANNEL_BASE_ADDR),
.Q_OR_I_N (0),
.DISABLE (DISABLE),
.DDS_DISABLE (DDS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW)
) i_tx_channel_0 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_data_in_req (dac_valid),
.dac_data_in (dac_data_i0),
.dac_data_out_req (dac_data_valid_A),
.dac_data_out (dac_data_i_A[15:0]),
.dac_data_iq_in (dac_data_iq_q0_s),
.dac_data_iq_out (dac_data_iq_i0_s),
.dac_enable (dac_enable_i0),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[0]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[0]),
.up_rack (up_rack_s[0]));
// dac channel 1
axi_adrv9001_tx_channel #(
.CHANNEL_ID (1),
.COMMON_ID (CHANNEL_BASE_ADDR),
.Q_OR_I_N (1),
.DISABLE (DISABLE),
.DDS_DISABLE (DDS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW)
) i_tx_channel_1 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_data_in_req (),
.dac_data_in (dac_data_q0),
.dac_data_out_req (dac_data_valid_A),
.dac_data_out (dac_data_q_A[15:0]),
.dac_data_iq_in (dac_data_iq_i0_s),
.dac_data_iq_out (dac_data_iq_q0_s),
.dac_enable (dac_enable_q0),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[1]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[1]),
.up_rack (up_rack_s[1]));
// dac channel 2 - disabled in 1R1T mode
axi_adrv9001_tx_channel #(
.CHANNEL_ID (2),
.COMMON_ID (CHANNEL_BASE_ADDR),
.Q_OR_I_N (0),
.DISABLE (MODE_R1),
.DDS_DISABLE (DDS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW)
) i_tx_channel_2 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_data_in_req (),
.dac_data_in (dac_data_i1),
.dac_data_out_req (dac_data_valid_B),
.dac_data_out (dac_data_i_B[15:0]),
.dac_data_iq_in (dac_data_iq_q1_s),
.dac_data_iq_out (dac_data_iq_i1_s),
.dac_enable (dac_enable_i1),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[2]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[2]),
.up_rack (up_rack_s[2]));
// dac channel 3 - disabled in 1R1T mode
axi_adrv9001_tx_channel #(
.CHANNEL_ID (3),
.COMMON_ID (CHANNEL_BASE_ADDR),
.Q_OR_I_N (1),
.DISABLE (MODE_R1),
.DDS_DISABLE (DDS_DISABLE),
.IQCORRECTION_DISABLE (IQCORRECTION_DISABLE),
.DAC_DDS_TYPE (DAC_DDS_TYPE),
.DAC_DDS_CORDIC_DW (DAC_DDS_CORDIC_DW),
.DAC_DDS_CORDIC_PHASE_DW (DAC_DDS_CORDIC_PHASE_DW)
) i_tx_channel_3 (
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_data_in_req (),
.dac_data_in (dac_data_q1),
.dac_data_out_req (dac_data_valid_B),
.dac_data_out (dac_data_q_B[15:0]),
.dac_data_iq_in (dac_data_iq_i1_s),
.dac_data_iq_out (dac_data_iq_q1_s),
.dac_enable (dac_enable_q1),
.dac_data_sync (dac_data_sync),
.dac_dds_format (dac_dds_format_s),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[3]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[3]),
.up_rack (up_rack_s[3]));
// dac common processor interface
up_dac_common #(
.ID (ID),
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.FPGA_FAMILY (FPGA_FAMILY),
.SPEED_GRADE (SPEED_GRADE),
.DEV_PACKAGE (DEV_PACKAGE),
.CONFIG(CONFIG),
.CLK_EDGE_SEL(0),
.COMMON_ID(COMMON_BASE_ADDR),
.DRP_DISABLE(1),
.USERPORTS_DISABLE(1),
.GPIO_DISABLE(1)
) i_up_dac_common (
.mmcm_rst (),
.dac_clk (dac_clk),
.dac_rst (dac_rst),
.dac_num_lanes (dac_num_lanes),
.dac_sdr_ddr_n (dac_sdr_ddr_n),
.dac_symb_op (dac_symb_op),
.dac_symb_8_16b (dac_symb_8_16b),
.dac_sync (dac_sync_out),
.dac_ext_sync_arm (dac_ext_sync_arm),
.dac_frame (),
.dac_clksel (),
.dac_custom_wr(),
.dac_custom_rd(32'b0),
.dac_custom_control(),
.dac_status_if_busy(1'b0),
.dac_par_type (),
.dac_par_enb (),
.dac_r1_mode (),
.up_dac_r1_mode (up_dac_r1_mode),
.dac_datafmt (dac_dds_format_s),
.dac_datarate (dac_datarate_s),
.dac_status (1'b1),
.dac_status_unf (dac_dunf),
.dac_clk_ratio (dac_clk_ratio),
.up_dac_ce (),
.up_pps_rcounter(32'h0),
.up_pps_status(1'b0),
.up_pps_irq_mask(),
.up_drp_sel (),
.up_drp_wr (),
.up_drp_addr (),
.up_drp_wdata (),
.up_drp_rdata (32'd0),
.up_drp_ready (1'd0),
.up_drp_locked (1'd1),
.up_usr_chanmax (),
.dac_usr_chanmax (8'd3),
.up_dac_gpio_in (32'd0),
.up_dac_gpio_out (),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq),
.up_waddr (up_waddr),
.up_wdata (up_wdata),
.up_wack (up_wack_s[4]),
.up_rreq (up_rreq),
.up_raddr (up_raddr),
.up_rdata (up_rdata_s[4]),
.up_rack (up_rack_s[4]));
assign dac_single_lane = dac_num_lanes[0];
end
endgenerate
endmodule