519 lines
16 KiB
Verilog
519 lines
16 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module up_adc_common (
|
|
|
|
// clock reset
|
|
|
|
mmcm_rst,
|
|
|
|
// adc interface
|
|
|
|
adc_clk,
|
|
adc_rst,
|
|
adc_r1_mode,
|
|
adc_ddr_edgesel,
|
|
adc_pin_mode,
|
|
adc_status,
|
|
adc_sync_status,
|
|
adc_status_ovf,
|
|
adc_status_unf,
|
|
adc_clk_ratio,
|
|
adc_start_code,
|
|
adc_sync,
|
|
adc_reg_address,
|
|
adc_reg_data_r,
|
|
adc_reg_data_w,
|
|
adc_reg_rw,
|
|
adc_reg_done,
|
|
|
|
// channel interface
|
|
|
|
up_status_pn_err,
|
|
up_status_pn_oos,
|
|
up_status_or,
|
|
|
|
// delay interface
|
|
|
|
delay_clk,
|
|
delay_rst,
|
|
delay_sel,
|
|
delay_rwn,
|
|
delay_addr,
|
|
delay_wdata,
|
|
delay_rdata,
|
|
delay_ack_t,
|
|
delay_locked,
|
|
|
|
// drp interface
|
|
|
|
drp_clk,
|
|
drp_rst,
|
|
drp_sel,
|
|
drp_wr,
|
|
drp_addr,
|
|
drp_wdata,
|
|
drp_rdata,
|
|
drp_ready,
|
|
drp_locked,
|
|
|
|
// user channel control
|
|
|
|
up_usr_chanmax,
|
|
adc_usr_chanmax,
|
|
up_adc_gpio_in,
|
|
up_adc_gpio_out,
|
|
|
|
// bus interface
|
|
|
|
up_rstn,
|
|
up_clk,
|
|
up_wreq,
|
|
up_waddr,
|
|
up_wdata,
|
|
up_wack,
|
|
up_rreq,
|
|
up_raddr,
|
|
up_rdata,
|
|
up_rack);
|
|
|
|
// parameters
|
|
|
|
localparam PCORE_VERSION = 32'h00080062;
|
|
parameter PCORE_ID = 0;
|
|
|
|
// clock reset
|
|
|
|
output mmcm_rst;
|
|
|
|
// adc interface
|
|
|
|
input adc_clk;
|
|
output adc_rst;
|
|
output adc_r1_mode;
|
|
output adc_ddr_edgesel;
|
|
output adc_pin_mode;
|
|
input adc_status;
|
|
input adc_sync_status;
|
|
input adc_status_ovf;
|
|
input adc_status_unf;
|
|
input [31:0] adc_clk_ratio;
|
|
output [31:0] adc_start_code;
|
|
output adc_sync;
|
|
output [31:0] adc_reg_address;
|
|
input [31:0] adc_reg_data_r;
|
|
output [31:0] adc_reg_data_w;
|
|
output [ 1:0] adc_reg_rw;
|
|
input adc_reg_done;
|
|
|
|
// channel interface
|
|
|
|
input up_status_pn_err;
|
|
input up_status_pn_oos;
|
|
input up_status_or;
|
|
|
|
// delay interface
|
|
|
|
input delay_clk;
|
|
output delay_rst;
|
|
output delay_sel;
|
|
output delay_rwn;
|
|
output [ 7:0] delay_addr;
|
|
output [ 4:0] delay_wdata;
|
|
input [ 4:0] delay_rdata;
|
|
input delay_ack_t;
|
|
input delay_locked;
|
|
|
|
// drp interface
|
|
|
|
input drp_clk;
|
|
output drp_rst;
|
|
output drp_sel;
|
|
output drp_wr;
|
|
output [11:0] drp_addr;
|
|
output [15:0] drp_wdata;
|
|
input [15:0] drp_rdata;
|
|
input drp_ready;
|
|
input drp_locked;
|
|
|
|
// user channel control
|
|
|
|
output [ 7:0] up_usr_chanmax;
|
|
input [ 7:0] adc_usr_chanmax;
|
|
input [31:0] up_adc_gpio_in;
|
|
output [31:0] up_adc_gpio_out;
|
|
|
|
// bus interface
|
|
|
|
input up_rstn;
|
|
input up_clk;
|
|
input up_wreq;
|
|
input [13:0] up_waddr;
|
|
input [31:0] up_wdata;
|
|
output up_wack;
|
|
input up_rreq;
|
|
input [13:0] up_raddr;
|
|
output [31:0] up_rdata;
|
|
output up_rack;
|
|
|
|
// internal registers
|
|
|
|
reg up_wack = 'd0;
|
|
reg [31:0] up_scratch = 'd0;
|
|
reg up_mmcm_resetn = 'd0;
|
|
reg up_resetn = 'd0;
|
|
reg up_adc_r1_mode = 'd0;
|
|
reg up_adc_ddr_edgesel = 'd0;
|
|
reg up_adc_pin_mode = 'd0;
|
|
reg up_delay_sel = 'd0;
|
|
reg up_delay_rwn = 'd0;
|
|
reg [ 7:0] up_delay_addr = 'd0;
|
|
reg [ 4:0] up_delay_wdata = 'd0;
|
|
reg up_drp_sel_t = 'd0;
|
|
reg up_drp_rwn = 'd0;
|
|
reg [11:0] up_drp_addr = 'd0;
|
|
reg [15:0] up_drp_wdata = 'd0;
|
|
reg up_status_ovf = 'd0;
|
|
reg up_status_unf = 'd0;
|
|
reg [ 7:0] up_usr_chanmax = 'd0;
|
|
reg [31:0] up_adc_gpio_out = 'd0;
|
|
reg [31:0] up_adc_start_code = 'd0;
|
|
reg up_adc_sync = 'd0;
|
|
reg up_rack = 'd0;
|
|
reg [31:0] up_rdata = 'd0;
|
|
reg [31:0] up_adc_reg_address = 'd0;
|
|
reg [31:0] up_adc_reg_data = 'd0;
|
|
reg up_adc_reg_write = 'd0;
|
|
reg up_adc_reg_read = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire up_wreq_s;
|
|
wire up_rreq_s;
|
|
wire up_preset_s;
|
|
wire up_mmcm_preset_s;
|
|
wire up_status_s;
|
|
wire up_sync_status_s;
|
|
wire up_status_ovf_s;
|
|
wire up_status_unf_s;
|
|
wire up_cntrl_xfer_done;
|
|
wire [31:0] up_adc_clk_count_s;
|
|
wire [ 4:0] up_delay_rdata_s;
|
|
wire up_delay_status_s;
|
|
wire up_delay_locked_s;
|
|
wire [15:0] up_drp_rdata_s;
|
|
wire up_drp_status_s;
|
|
wire up_drp_locked_s;
|
|
wire [31:0] up_adc_reg_data_s;
|
|
wire up_adc_reg_done_s;
|
|
|
|
// decode block select
|
|
|
|
assign up_wreq_s = (up_waddr[13:8] == 6'h00) ? up_wreq : 1'b0;
|
|
assign up_rreq_s = (up_raddr[13:8] == 6'h00) ? up_rreq : 1'b0;
|
|
assign up_preset_s = ~up_resetn;
|
|
assign up_mmcm_preset_s = ~up_mmcm_resetn;
|
|
|
|
// processor write interface
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 0) begin
|
|
up_wack <= 'd0;
|
|
up_scratch <= 'd0;
|
|
up_mmcm_resetn <= 'd0;
|
|
up_resetn <= 'd0;
|
|
up_adc_r1_mode <= 'd0;
|
|
up_adc_ddr_edgesel <= 'd0;
|
|
up_adc_pin_mode <= 'd0;
|
|
up_delay_sel <= 'd0;
|
|
up_delay_rwn <= 'd0;
|
|
up_delay_addr <= 'd0;
|
|
up_delay_wdata <= 'd0;
|
|
up_drp_sel_t <= 'd0;
|
|
up_drp_rwn <= 'd0;
|
|
up_drp_addr <= 'd0;
|
|
up_drp_wdata <= 'd0;
|
|
up_status_ovf <= 'd0;
|
|
up_status_unf <= 'd0;
|
|
up_usr_chanmax <= 'd0;
|
|
up_adc_gpio_out <= 'd0;
|
|
up_adc_start_code <= 'd0;
|
|
up_adc_reg_address <= 'd0;
|
|
up_adc_reg_data <= 'd0;
|
|
up_adc_reg_read <= 'd0;
|
|
up_adc_reg_write <= 'd0;
|
|
end else begin
|
|
up_wack <= up_wreq_s;
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h02)) begin
|
|
up_scratch <= up_wdata;
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h10)) begin
|
|
up_mmcm_resetn <= up_wdata[1];
|
|
up_resetn <= up_wdata[0];
|
|
end
|
|
if (up_adc_sync == 1'b1) begin
|
|
if (up_cntrl_xfer_done == 1'b1) begin
|
|
up_adc_sync <= 1'b0;
|
|
end
|
|
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h11)) begin
|
|
up_adc_sync <= up_wdata[3];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h11)) begin
|
|
up_adc_r1_mode <= up_wdata[2];
|
|
up_adc_ddr_edgesel <= up_wdata[1];
|
|
up_adc_pin_mode <= up_wdata[0];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h12)) begin
|
|
up_adc_reg_address <= up_wdata;
|
|
end
|
|
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h13)) begin
|
|
up_adc_reg_data <= up_wdata;
|
|
end
|
|
else if((up_adc_reg_done_s == 1'b1) && (up_adc_reg_read == 1'b1))
|
|
begin
|
|
up_adc_reg_data <= up_adc_reg_data_s;
|
|
end
|
|
|
|
if (up_adc_reg_read == 1'b1) begin
|
|
if (up_adc_reg_done_s == 1'b1) begin
|
|
up_adc_reg_read <= 1'b0;
|
|
end
|
|
end else if (up_adc_reg_write == 1'b1) begin
|
|
if (up_adc_reg_done_s == 1'b1) begin
|
|
up_adc_reg_write <= 1'b0;
|
|
end
|
|
end
|
|
else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h14)) begin
|
|
up_adc_reg_write <= up_wdata[1];
|
|
up_adc_reg_read <= up_wdata[0];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h18)) begin
|
|
up_delay_sel <= up_wdata[17];
|
|
up_delay_rwn <= up_wdata[16];
|
|
up_delay_addr <= up_wdata[15:8];
|
|
up_delay_wdata <= up_wdata[4:0];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
|
|
up_drp_sel_t <= ~up_drp_sel_t;
|
|
up_drp_rwn <= up_wdata[28];
|
|
up_drp_addr <= up_wdata[27:16];
|
|
up_drp_wdata <= up_wdata[15:0];
|
|
end
|
|
if (up_status_ovf_s == 1'b1) begin
|
|
up_status_ovf <= 1'b1;
|
|
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h22)) begin
|
|
up_status_ovf <= up_status_ovf & ~up_wdata[2];
|
|
end
|
|
if (up_status_unf_s == 1'b1) begin
|
|
up_status_unf <= 1'b1;
|
|
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h22)) begin
|
|
up_status_unf <= up_status_unf & ~up_wdata[1];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h28)) begin
|
|
up_usr_chanmax <= up_wdata[7:0];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h29)) begin
|
|
up_adc_start_code <= up_wdata[31:0];
|
|
end
|
|
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h2f)) begin
|
|
up_adc_gpio_out <= up_wdata;
|
|
end
|
|
end
|
|
end
|
|
|
|
// processor read interface
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 0) begin
|
|
up_rack <= 'd0;
|
|
up_rdata <= 'd0;
|
|
end else begin
|
|
up_rack <= up_rreq_s;
|
|
if (up_rreq_s == 1'b1) begin
|
|
case (up_raddr[7:0])
|
|
8'h00: up_rdata <= PCORE_VERSION;
|
|
8'h01: up_rdata <= PCORE_ID;
|
|
8'h02: up_rdata <= up_scratch;
|
|
8'h10: up_rdata <= {30'd0, up_mmcm_resetn, up_resetn};
|
|
8'h11: up_rdata <= {28'd0, up_adc_sync, up_adc_r1_mode, up_adc_ddr_edgesel, up_adc_pin_mode};
|
|
8'h12: up_rdata <= up_adc_reg_address;
|
|
8'h13: up_rdata <= up_adc_reg_data;
|
|
8'h14: up_rdata <= {30'd0, up_adc_reg_write, up_adc_reg_read};
|
|
8'h15: up_rdata <= up_adc_clk_count_s;
|
|
8'h16: up_rdata <= adc_clk_ratio;
|
|
8'h17: up_rdata <= {28'd0, up_status_pn_err, up_status_pn_oos, up_status_or, up_status_s};
|
|
8'h18: up_rdata <= {14'd0, up_delay_sel, up_delay_rwn, up_delay_addr, 3'd0, up_delay_wdata};
|
|
8'h19: up_rdata <= {22'd0, up_delay_locked_s, up_delay_status_s, 3'd0, up_delay_rdata_s};
|
|
8'h1a: up_rdata <= {31'd0, up_sync_status_s};
|
|
8'h1c: up_rdata <= {3'd0, up_drp_rwn, up_drp_addr, up_drp_wdata};
|
|
8'h1d: up_rdata <= {14'd0, up_drp_locked_s, up_drp_status_s, up_drp_rdata_s};
|
|
8'h22: up_rdata <= {29'd0, up_status_ovf, up_status_unf, 1'b0};
|
|
8'h23: up_rdata <= 32'd8;
|
|
8'h28: up_rdata <= {24'd0, adc_usr_chanmax};
|
|
8'h29: up_rdata <= up_adc_start_code;
|
|
8'h2e: up_rdata <= up_adc_gpio_in;
|
|
8'h2f: up_rdata <= up_adc_gpio_out;
|
|
default: up_rdata <= 0;
|
|
endcase
|
|
end else begin
|
|
up_rdata <= 32'd0;
|
|
end
|
|
end
|
|
end
|
|
|
|
// resets
|
|
|
|
ad_rst i_mmcm_rst_reg (.preset(up_mmcm_preset_s), .clk(drp_clk), .rst(mmcm_rst));
|
|
ad_rst i_adc_rst_reg (.preset(up_preset_s), .clk(adc_clk), .rst(adc_rst));
|
|
ad_rst i_delay_rst_reg (.preset(up_preset_s), .clk(delay_clk), .rst(delay_rst));
|
|
ad_rst i_drp_rst_reg (.preset(up_preset_s), .clk(drp_clk), .rst(drp_rst));
|
|
|
|
// adc control & status
|
|
|
|
up_xfer_cntrl #(.DATA_WIDTH(70)) i_adc_xfer_cntrl (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_data_cntrl ({ up_adc_reg_address,
|
|
up_adc_reg_data,
|
|
up_adc_reg_write,
|
|
up_adc_reg_read,
|
|
up_adc_sync,
|
|
up_adc_r1_mode,
|
|
up_adc_ddr_edgesel,
|
|
up_adc_pin_mode}),
|
|
.up_xfer_done (up_cntrl_xfer_done),
|
|
.d_rst (adc_rst),
|
|
.d_clk (adc_clk),
|
|
.d_data_cntrl ({ adc_reg_address,
|
|
adc_reg_data_w,
|
|
adc_reg_rw[1],
|
|
adc_reg_rw[0],
|
|
adc_sync,
|
|
adc_r1_mode,
|
|
adc_ddr_edgesel,
|
|
adc_pin_mode}));
|
|
|
|
up_xfer_status #(.DATA_WIDTH(37)) i_adc_xfer_status (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_data_status ({up_adc_reg_data_s,
|
|
up_adc_reg_done_s,
|
|
up_sync_status_s,
|
|
up_status_s,
|
|
up_status_ovf_s,
|
|
up_status_unf_s}),
|
|
.d_rst (adc_rst),
|
|
.d_clk (adc_clk),
|
|
.d_data_status ({ adc_reg_data_r,
|
|
adc_reg_done,
|
|
adc_sync_status,
|
|
adc_status,
|
|
adc_status_ovf,
|
|
adc_status_unf}));
|
|
|
|
up_xfer_cntrl #(.DATA_WIDTH(32)) i_adc_xfer_start_code (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_data_cntrl (up_adc_start_code),
|
|
.up_xfer_done (),
|
|
.d_rst (adc_rst),
|
|
.d_clk (adc_clk),
|
|
.d_data_cntrl (adc_start_code));
|
|
|
|
// adc clock monitor
|
|
|
|
up_clock_mon i_adc_clock_mon (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_d_count (up_adc_clk_count_s),
|
|
.d_rst (adc_rst),
|
|
.d_clk (adc_clk));
|
|
|
|
// delay control & status
|
|
|
|
up_delay_cntrl i_delay_cntrl (
|
|
.delay_clk (delay_clk),
|
|
.delay_rst (delay_rst),
|
|
.delay_sel (delay_sel),
|
|
.delay_rwn (delay_rwn),
|
|
.delay_addr (delay_addr),
|
|
.delay_wdata (delay_wdata),
|
|
.delay_rdata (delay_rdata),
|
|
.delay_ack_t (delay_ack_t),
|
|
.delay_locked (delay_locked),
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_delay_sel (up_delay_sel),
|
|
.up_delay_rwn (up_delay_rwn),
|
|
.up_delay_addr (up_delay_addr),
|
|
.up_delay_wdata (up_delay_wdata),
|
|
.up_delay_rdata (up_delay_rdata_s),
|
|
.up_delay_status (up_delay_status_s),
|
|
.up_delay_locked (up_delay_locked_s));
|
|
|
|
// drp control & status
|
|
|
|
up_drp_cntrl i_drp_cntrl (
|
|
.drp_clk (drp_clk),
|
|
.drp_rst (drp_rst),
|
|
.drp_sel (drp_sel),
|
|
.drp_wr (drp_wr),
|
|
.drp_addr (drp_addr),
|
|
.drp_wdata (drp_wdata),
|
|
.drp_rdata (drp_rdata),
|
|
.drp_ready (drp_ready),
|
|
.drp_locked (drp_locked),
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_drp_sel_t (up_drp_sel_t),
|
|
.up_drp_rwn (up_drp_rwn),
|
|
.up_drp_addr (up_drp_addr),
|
|
.up_drp_wdata (up_drp_wdata),
|
|
.up_drp_rdata (up_drp_rdata_s),
|
|
.up_drp_status (up_drp_status_s),
|
|
.up_drp_locked (up_drp_locked_s));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|