8755e6da44
In non-streaming mode we want direction changes to be applied immediately. The current code has a typo and checks the wrong signal. overwrite_data holds the configured output value of the pin, whereas overwrite_enable configures whether the pin is in streaming or manual mode. For correct operation the later signal should be used to decide whether a direction change should be applied. Otherwise the direction change will only be applied if the output value of the pin is set to logic high. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> |
||
---|---|---|
.. | ||
Makefile | ||
axi_logic_analyzer.v | ||
axi_logic_analyzer_constr.xdc | ||
axi_logic_analyzer_ip.tcl | ||
axi_logic_analyzer_reg.v | ||
axi_logic_analyzer_trigger.v |