550 lines
34 KiB
Tcl
550 lines
34 KiB
Tcl
|
|
# motor control
|
|
|
|
|
|
# port definition
|
|
|
|
|
|
# position detection interface
|
|
create_bd_port -dir I -from 2 -to 0 position_m1_i
|
|
create_bd_port -dir I -from 2 -to 0 position_m2_i
|
|
|
|
# current monitor interface
|
|
# clock
|
|
create_bd_port -dir O adc_clk_o
|
|
# data motor 1
|
|
create_bd_port -dir I adc_m1_ia_dat_i
|
|
create_bd_port -dir I adc_m1_ib_dat_i
|
|
create_bd_port -dir I adc_m1_vbus_dat_i
|
|
# data motor 2
|
|
create_bd_port -dir I adc_m2_ia_dat_i
|
|
create_bd_port -dir I adc_m2_ib_dat_i
|
|
create_bd_port -dir I adc_m2_vbus_dat_i
|
|
|
|
# motor control interface
|
|
create_bd_port -dir o -from 3 -to 0 gpo_o
|
|
# motor 1
|
|
create_bd_port -dir O fmc_m1_en_o
|
|
create_bd_port -dir O pwm_m1_al_o
|
|
create_bd_port -dir O pwm_m1_ah_o
|
|
create_bd_port -dir O pwm_m1_cl_o
|
|
create_bd_port -dir O pwm_m1_ch_o
|
|
create_bd_port -dir O pwm_m1_bl_o
|
|
create_bd_port -dir O pwm_m1_bh_o
|
|
# motor 2
|
|
create_bd_port -dir O fmc_m2_en_o
|
|
create_bd_port -dir O pwm_m2_al_o
|
|
create_bd_port -dir O pwm_m2_ah_o
|
|
create_bd_port -dir O pwm_m2_cl_o
|
|
create_bd_port -dir O pwm_m2_ch_o
|
|
create_bd_port -dir O pwm_m2_bl_o
|
|
create_bd_port -dir O pwm_m2_bh_o
|
|
|
|
# Ethernet
|
|
# phy 1
|
|
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:rgmii_rtl:1.0 eth1_rgmii
|
|
# phy 2
|
|
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:rgmii_rtl:1.0 eth2_rgmii
|
|
#common mdio interface
|
|
create_bd_port -dir O eth_mdio_mdc
|
|
create_bd_port -dir O eth_mdio_o
|
|
create_bd_port -dir O eth_mdio_t
|
|
create_bd_port -dir I eth_mdio_i
|
|
#common reset
|
|
create_bd_port -dir O eth_phy_rst_n
|
|
# reference clock for the delay interface used for the gmii to rgmii conversion
|
|
create_bd_port -dir o -type clk refclk
|
|
create_bd_port -dir o -from 0 -to 0 -type rst refclk_rst
|
|
|
|
# iic
|
|
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:iic_rtl:1.0 iic_ee2
|
|
|
|
# xadc interface
|
|
create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_analog_io_rtl:1.0 vaux0
|
|
create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_analog_io_rtl:1.0 vaux8
|
|
create_bd_port -dir O -from 4 -to 0 muxaddr_out
|
|
|
|
|
|
# core instantiation and configuration
|
|
|
|
|
|
# additions to default configuration
|
|
# Enable additional peripherals from the PS7 block
|
|
set_property -dict [list CONFIG.PCW_USE_S_AXI_HP1 {1} ] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_ENET0_ENET0_IO {EMIO} ] $sys_ps7
|
|
set_property -dict [list CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {1} ] $sys_ps7
|
|
|
|
# Add additional clocks to be used by gmii to rgmii modules and current monitoring modules
|
|
set_property -dict [ list CONFIG.CLKOUT2_USED {true} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT3_USED {true} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT4_USED {true} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT5_USED {true} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT2_REQUESTED_OUT_FREQ {125} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT3_REQUESTED_OUT_FREQ {25} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT4_REQUESTED_OUT_FREQ {20} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT5_REQUESTED_OUT_FREQ {20} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT2_DRIVES {No_buffer} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT3_DRIVES {No_buffer} ] $sys_audio_clkgen
|
|
set_property -dict [ list CONFIG.CLKOUT4_DRIVES {No_buffer} ] $sys_audio_clkgen
|
|
|
|
# speed detectors
|
|
# speed detector core motor 1
|
|
set speed_detector_m1 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_speed:1.0 speed_detector_m1 ]
|
|
# dma motor 1
|
|
set speed_detector_m1_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 speed_detector_m1_dma]
|
|
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $speed_detector_m1_dma
|
|
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $speed_detector_m1_dma
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $speed_detector_m1_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $speed_detector_m1_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $speed_detector_m1_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {32}] $speed_detector_m1_dma
|
|
# speed detector core motor 2
|
|
set speed_detector_m2 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_speed:1.0 speed_detector_m2 ]
|
|
# dma motor 2
|
|
set speed_detector_m2_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 speed_detector_m2_dma]
|
|
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $speed_detector_m2_dma
|
|
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $speed_detector_m2_dma
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $speed_detector_m2_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $speed_detector_m2_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $speed_detector_m2_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {32}] $speed_detector_m2_dma
|
|
|
|
# current monitor peripherals
|
|
# current monitor core motor 1
|
|
set current_monitor_m1 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_current_monitor:1.0 current_monitor_m1 ]
|
|
# dma motor 1
|
|
set current_monitor_m1_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 current_monitor_m1_dma ]
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $current_monitor_m1_dma
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $current_monitor_m1_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $current_monitor_m1_dma
|
|
# data packer motor 1
|
|
#
|
|
set current_monitor_m1_apack [create_bd_cell -type ip -vlnv analog.com:user:util_adc_pack:1.0 current_monitor_m1_apack]
|
|
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $current_monitor_m1_apack
|
|
# set current_monitor_m1_pack [ create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 current_monitor_m1_pack ]
|
|
# set_property -dict [ list CONFIG.NUM_OF_CHANNELS {4} ] $current_monitor_m1_pack
|
|
# set_property -dict [ list CONFIG.CHANNEL_DATA_WIDTH {16} ] $current_monitor_m1_pack
|
|
|
|
# current monitor core motor 2
|
|
set current_monitor_m2 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_current_monitor:1.0 current_monitor_m2 ]
|
|
# dma motor 2
|
|
set current_monitor_m2_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 current_monitor_m2_dma ]
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $current_monitor_m2_dma
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $current_monitor_m2_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $current_monitor_m2_dma
|
|
# data packer motor 2
|
|
set current_monitor_m2_apack [create_bd_cell -type ip -vlnv analog.com:user:util_adc_pack:1.0 current_monitor_m2_apack]
|
|
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] $current_monitor_m2_apack
|
|
#set current_monitor_m2_pack [ create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 current_monitor_m2_pack ]
|
|
#set_property -dict [ list CONFIG.NUM_OF_CHANNELS {4} ] $current_monitor_m2_pack
|
|
#set_property -dict [ list CONFIG.CHANNEL_DATA_WIDTH {16} ] $current_monitor_m2_pack
|
|
|
|
#controller
|
|
# controller core motor 1
|
|
set controller_m1 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_controller:1.0 controller_m1 ]
|
|
# dma motor 1
|
|
set controller_m1_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 controller_m1_dma ]
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $controller_m1_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $controller_m1_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {256}] $controller_m1_dma
|
|
# data packer motor 1
|
|
set controller_m1_apack [create_bd_cell -type ip -vlnv analog.com:user:util_adc_pack:1.0 controller_m1_apack]
|
|
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] $controller_m1_apack
|
|
set_property -dict [list CONFIG.DATA_WIDTH {32}] $controller_m1_apack
|
|
|
|
#set controller_m1_pack [ create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 controller_m1_pack ]
|
|
#set_property -dict [ list CONFIG.NUM_OF_CHANNELS {8} ] $controller_m1_pack
|
|
#set_property -dict [ list CONFIG.CHANNEL_DATA_WIDTH {32} ] $controller_m1_pack
|
|
# controller core motor 2
|
|
set controller_m2 [ create_bd_cell -type ip -vlnv analog.com:user:axi_mc_controller:1.0 controller_m2 ]
|
|
# dma motor 2
|
|
set controller_m2_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 controller_m2_dma ]
|
|
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $controller_m2_dma
|
|
set_property -dict [list CONFIG.CYCLIC {0}] $controller_m2_dma
|
|
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {256}] $controller_m2_dma
|
|
# data packer motor 2
|
|
#set controller_m2_pack [ create_bd_cell -type ip -vlnv analog.com:user:util_cpack:1.0 controller_m2_pack ]
|
|
#set_property -dict [ list CONFIG.NUM_OF_CHANNELS {8} ] $controller_m2_pack
|
|
set controller_m2_apack [create_bd_cell -type ip -vlnv analog.com:user:util_adc_pack:1.0 controller_m2_apack]
|
|
set_property -dict [list CONFIG.NUM_OF_CHANNELS {8}] $controller_m2_apack
|
|
set_property -dict [list CONFIG.DATA_WIDTH {32}] $controller_m2_apack
|
|
|
|
#ethernet gmii to rgmii converters
|
|
# phy 1
|
|
set gmii_to_rgmii_eth1 [ create_bd_cell -type ip -vlnv analog.com:user:util_gmii_to_rgmii:1.0 gmii_to_rgmii_eth1 ]
|
|
set_property -dict [list CONFIG.PHY_AD {"00000"}] $gmii_to_rgmii_eth1
|
|
set_property -dict [list CONFIG.IODELAY_CTRL {1}] $gmii_to_rgmii_eth1
|
|
|
|
# phy 2
|
|
set gmii_to_rgmii_eth2 [ create_bd_cell -type ip -vlnv analog.com:user:util_gmii_to_rgmii:1.0 gmii_to_rgmii_eth2 ]
|
|
set_property -dict [list CONFIG.PHY_AD {"00001"}] $gmii_to_rgmii_eth2
|
|
|
|
# iic
|
|
set iic_ee2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_iic:2.0 iic_ee2 ]
|
|
|
|
# xadc
|
|
set xadc_core [ create_bd_cell -type ip -vlnv xilinx.com:ip:xadc_wiz:3.0 xadc_core ]
|
|
set_property -dict [ list CONFIG.XADC_STARUP_SELECTION {simultaneous_sampling} ] $xadc_core
|
|
set_property -dict [ list CONFIG.ENABLE_EXTERNAL_MUX {false} ] $xadc_core
|
|
set_property -dict [ list CONFIG.CHANNEL_ENABLE_VAUXP0_VAUXN0 {true} ] $xadc_core
|
|
set_property -dict [ list CONFIG.OT_ALARM {false} ] $xadc_core
|
|
set_property -dict [ list CONFIG.USER_TEMP_ALARM {false} ] $xadc_core
|
|
set_property -dict [ list CONFIG.VCCAUX_ALARM {false} ] $xadc_core
|
|
set_property -dict [ list CONFIG.VCCINT_ALARM {false} ] $xadc_core
|
|
|
|
# connections
|
|
|
|
|
|
# speed detector
|
|
# motor 1
|
|
ad_connect sys_cpu_clk speed_detector_m1/ref_clk
|
|
|
|
ad_connect sys_cpu_clk speed_detector_m1_dma/fifo_wr_clk
|
|
|
|
ad_connect position_m1_i speed_detector_m1/position_i
|
|
ad_connect speed_detector_m1/new_speed_o speed_detector_m1_dma/fifo_wr_en
|
|
ad_connect speed_detector_m1/speed_o speed_detector_m1_dma/fifo_wr_din
|
|
# motor 2
|
|
ad_connect sys_cpu_clk speed_detector_m2/ref_clk
|
|
|
|
ad_connect sys_cpu_clk speed_detector_m2_dma/fifo_wr_clk
|
|
|
|
ad_connect position_m2_i speed_detector_m2/position_i
|
|
ad_connect speed_detector_m2/new_speed_o speed_detector_m2_dma/fifo_wr_en
|
|
ad_connect speed_detector_m2/speed_o speed_detector_m2_dma/fifo_wr_din
|
|
|
|
# current monitor
|
|
ad_connect adc_clk_o current_monitor_m1/adc_clk_o
|
|
# motor 1
|
|
ad_connect sys_cpu_clk current_monitor_m1/ref_clk
|
|
|
|
ad_connect sys_cpu_clk current_monitor_m1_dma/fifo_wr_clk
|
|
|
|
ad_connect current_monitor_m1/adc_clk_i sys_audio_clkgen/clk_out5
|
|
ad_connect adc_m1_ia_dat_i current_monitor_m1/adc_ia_dat_i
|
|
ad_connect adc_m1_ib_dat_i current_monitor_m1/adc_ib_dat_i
|
|
ad_connect adc_m1_vbus_dat_i current_monitor_m1/adc_vbus_dat_i
|
|
|
|
ad_connect sys_cpu_clk current_monitor_m1_apack/clk
|
|
ad_connect current_monitor_m1/adc_enable_ia current_monitor_m1_apack/chan_enable_0
|
|
ad_connect current_monitor_m1/adc_enable_ib current_monitor_m1_apack/chan_enable_1
|
|
ad_connect current_monitor_m1/adc_enable_vbus current_monitor_m1_apack/chan_enable_2
|
|
ad_connect current_monitor_m1/adc_enable_stub current_monitor_m1_apack/chan_enable_3
|
|
ad_connect current_monitor_m1_apack/chan_valid_0 current_monitor_m1/i_ready_o
|
|
ad_connect current_monitor_m1_apack/chan_valid_1 current_monitor_m1/i_ready_o
|
|
ad_connect current_monitor_m1_apack/chan_valid_2 current_monitor_m1/i_ready_o
|
|
ad_connect current_monitor_m1_apack/chan_valid_3 current_monitor_m1/i_ready_o
|
|
ad_connect current_monitor_m1/ia_o current_monitor_m1_apack/chan_data_0
|
|
ad_connect current_monitor_m1/ib_o current_monitor_m1_apack/chan_data_1
|
|
ad_connect current_monitor_m1/vbus_o current_monitor_m1_apack/chan_data_2
|
|
ad_connect current_monitor_m1/vbus_o current_monitor_m1_apack/chan_data_3
|
|
ad_connect current_monitor_m1_apack/ddata current_monitor_m1_dma/fifo_wr_din
|
|
ad_connect current_monitor_m1_apack/dvalid current_monitor_m1_dma/fifo_wr_en
|
|
|
|
# connect_bd_net -net [get_bd_nets sys_100m_clk] [get_bd_pins current_monitor_m1_pack/adc_clk] [get_bd_pins sys_ps7/FCLK_CLK0]
|
|
# connect_bd_net -net [get_bd_nets sys_rstgen_peripheral_reset] [get_bd_pins current_monitor_m1_pack/adc_rst] [get_bd_pins sys_rstgen/peripheral_reset]
|
|
# connect_bd_net -net current_monitor_m1_adc_enable_ia [get_bd_pins current_monitor_m1/adc_enable_ia] [get_bd_pins current_monitor_m1_pack/adc_enable_0]
|
|
# connect_bd_net -net current_monitor_m1_adc_enable_ib [get_bd_pins current_monitor_m1/adc_enable_ib] [get_bd_pins current_monitor_m1_pack/adc_enable_1]
|
|
# connect_bd_net -net current_monitor_m1_adc_enable_vbus [get_bd_pins current_monitor_m1/adc_enable_vbus] [get_bd_pins current_monitor_m1_pack/adc_enable_2]
|
|
# connect_bd_net -net current_monitor_m1_adc_enable_stub [get_bd_pins current_monitor_m1/adc_enable_stub] [get_bd_pins current_monitor_m1_pack/adc_enable_3]
|
|
# connect_bd_net -net current_monitor_m1_i_ready_o [get_bd_pins current_monitor_m1_pack/adc_valid_0] [get_bd_pins current_monitor_m1/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m1_i_ready_o [get_bd_pins current_monitor_m1_pack/adc_valid_1] [get_bd_pins current_monitor_m1/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m1_i_ready_o [get_bd_pins current_monitor_m1_pack/adc_valid_2] [get_bd_pins current_monitor_m1/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m1_i_ready_o [get_bd_pins current_monitor_m1_pack/adc_valid_3] [get_bd_pins current_monitor_m1/i_ready_o]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1/ia_o] [get_bd_pins current_monitor_m1_pack/adc_data_0]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1/ib_o] [get_bd_pins current_monitor_m1_pack/adc_data_1]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1/vbus_o] [get_bd_pins current_monitor_m1_pack/adc_data_2]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1/vbus_o] [get_bd_pins current_monitor_m1_pack/adc_data_3]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1_pack/adc_data] [get_bd_pins current_monitor_m1_dma/fifo_wr_din]
|
|
# connect_bd_net [get_bd_pins current_monitor_m1_pack/adc_valid] [get_bd_pins current_monitor_m1_dma/fifo_wr_en]
|
|
|
|
# motor 2
|
|
ad_connect sys_cpu_clk current_monitor_m2/ref_clk
|
|
|
|
ad_connect sys_cpu_clk current_monitor_m2_dma/fifo_wr_clk
|
|
|
|
ad_connect current_monitor_m2/adc_clk_i sys_audio_clkgen/clk_out5
|
|
ad_connect adc_m2_ia_dat_i current_monitor_m2/adc_ia_dat_i
|
|
ad_connect adc_m2_ib_dat_i current_monitor_m2/adc_ib_dat_i
|
|
ad_connect adc_m2_vbus_dat_i current_monitor_m2/adc_vbus_dat_i
|
|
|
|
ad_connect sys_cpu_clk current_monitor_m2_apack/clk
|
|
ad_connect current_monitor_m2/adc_enable_ia current_monitor_m2_apack/chan_enable_0
|
|
ad_connect current_monitor_m2/adc_enable_ib current_monitor_m2_apack/chan_enable_1
|
|
ad_connect current_monitor_m2/adc_enable_vbus current_monitor_m2_apack/chan_enable_2
|
|
ad_connect current_monitor_m2/adc_enable_stub current_monitor_m2_apack/chan_enable_3
|
|
ad_connect current_monitor_m2_apack/chan_valid_0 current_monitor_m2/i_ready_o
|
|
ad_connect current_monitor_m2_apack/chan_valid_1 current_monitor_m2/i_ready_o
|
|
ad_connect current_monitor_m2_apack/chan_valid_2 current_monitor_m2/i_ready_o
|
|
ad_connect current_monitor_m2_apack/chan_valid_3 current_monitor_m2/i_ready_o
|
|
ad_connect current_monitor_m2/ia_o current_monitor_m2_apack/chan_data_0
|
|
ad_connect current_monitor_m2/ib_o current_monitor_m2_apack/chan_data_1
|
|
ad_connect current_monitor_m2/vbus_o current_monitor_m2_apack/chan_data_2
|
|
ad_connect current_monitor_m2/vbus_o current_monitor_m2_apack/chan_data_3
|
|
ad_connect current_monitor_m2_apack/ddata current_monitor_m2_dma/fifo_wr_din
|
|
ad_connect current_monitor_m2_apack/dvalid current_monitor_m2_dma/fifo_wr_en
|
|
# connect_bd_net -net [get_bd_nets sys_100m_clk] [get_bd_pins current_monitor_m2_pack/adc_clk] [get_bd_pins sys_ps7/FCLK_CLK0]
|
|
# connect_bd_net -net [get_bd_nets sys_rstgen_peripheral_reset] [get_bd_pins current_monitor_m2_pack/adc_rst] [get_bd_pins sys_rstgen/peripheral_reset]
|
|
# connect_bd_net -net current_monitor_m2_adc_enable_ia [get_bd_pins current_monitor_m2/adc_enable_ia] [get_bd_pins current_monitor_m2_pack/adc_enable_0]
|
|
# connect_bd_net -net current_monitor_m2_adc_enable_ib [get_bd_pins current_monitor_m2/adc_enable_ib] [get_bd_pins current_monitor_m2_pack/adc_enable_1]
|
|
# connect_bd_net -net current_monitor_m2_adc_enable_vbus [get_bd_pins current_monitor_m2/adc_enable_vbus] [get_bd_pins current_monitor_m2_pack/adc_enable_2]
|
|
# connect_bd_net -net current_monitor_m2_adc_enable_stub [get_bd_pins current_monitor_m2/adc_enable_stub] [get_bd_pins current_monitor_m2_pack/adc_enable_3]
|
|
# connect_bd_net -net current_monitor_m2_i_ready_o [get_bd_pins current_monitor_m2_pack/adc_valid_0] [get_bd_pins current_monitor_m2/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m2_i_ready_o [get_bd_pins current_monitor_m2_pack/adc_valid_1] [get_bd_pins current_monitor_m2/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m2_i_ready_o [get_bd_pins current_monitor_m2_pack/adc_valid_2] [get_bd_pins current_monitor_m2/i_ready_o]
|
|
# connect_bd_net -net current_monitor_m2_i_ready_o [get_bd_pins current_monitor_m2_pack/adc_valid_3] [get_bd_pins current_monitor_m2/i_ready_o]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2/ia_o] [get_bd_pins current_monitor_m2_pack/adc_data_0]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2/ib_o] [get_bd_pins current_monitor_m2_pack/adc_data_1]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2/vbus_o] [get_bd_pins current_monitor_m2_pack/adc_data_2]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2/vbus_o] [get_bd_pins current_monitor_m2_pack/adc_data_3]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2_pack/adc_valid] [get_bd_pins current_monitor_m2_dma/fifo_wr_en]
|
|
# connect_bd_net [get_bd_pins current_monitor_m2_pack/adc_data] [get_bd_pins current_monitor_m2_dma/fifo_wr_din]
|
|
|
|
#controller
|
|
# motor 1
|
|
ad_connect sys_cpu_clk controller_m1/ref_clk
|
|
ad_connect controller_m1/ctrl_data_clk sys_audio_clkgen/clk_out5
|
|
|
|
ad_connect sys_cpu_clk controller_m1_dma/fifo_wr_clk
|
|
|
|
ad_connect fmc_m1_en_o controller_m1/fmc_en_o
|
|
ad_connect pwm_m1_al_o controller_m1/pwm_al_o
|
|
ad_connect pwm_m1_ah_o controller_m1/pwm_ah_o
|
|
ad_connect pwm_m1_bl_o controller_m1/pwm_bl_o
|
|
ad_connect pwm_m1_bh_o controller_m1/pwm_bh_o
|
|
ad_connect pwm_m1_cl_o controller_m1/pwm_cl_o
|
|
ad_connect pwm_m1_ch_o controller_m1/pwm_ch_o
|
|
|
|
ad_connect controller_m1/sensors_o speed_detector_m1/hall_bemf_i
|
|
ad_connect controller_m1/position_i speed_detector_m1/position_o
|
|
ad_connect controller_m1/ctrl_data_valid_i current_monitor_m1/i_ready_o
|
|
|
|
#connect_bd_net -net controller_m1_adc_clk_o [get_bd_pins controller_m1_pack/adc_clk] [get_bd_pins controller_m1/adc_clk_o]
|
|
#connect_bd_net -net [get_bd_nets sys_rstgen_peripheral_reset] [get_bd_pins controller_m1_pack/adc_rst] [get_bd_pins sys_rstgen/peripheral_reset]
|
|
|
|
#connect_bd_net -net controller_m1_adc_enable_c0 [get_bd_pins controller_m1/adc_enable_c0] [get_bd_pins controller_m1_pack/adc_enable_0]
|
|
#connect_bd_net -net controller_m1_adc_enable_c1 [get_bd_pins controller_m1/adc_enable_c1] [get_bd_pins controller_m1_pack/adc_enable_1]
|
|
#connect_bd_net -net controller_m1_adc_enable_c2 [get_bd_pins controller_m1/adc_enable_c2] [get_bd_pins controller_m1_pack/adc_enable_2]
|
|
#connect_bd_net -net controller_m1_adc_enable_c3 [get_bd_pins controller_m1/adc_enable_c3] [get_bd_pins controller_m1_pack/adc_enable_3]
|
|
#connect_bd_net -net controller_m1_adc_enable_c4 [get_bd_pins controller_m1/adc_enable_c4] [get_bd_pins controller_m1_pack/adc_enable_4]
|
|
#connect_bd_net -net controller_m1_adc_enable_c5 [get_bd_pins controller_m1/adc_enable_c5] [get_bd_pins controller_m1_pack/adc_enable_5]
|
|
#connect_bd_net -net controller_m1_adc_enable_c6 [get_bd_pins controller_m1/adc_enable_c6] [get_bd_pins controller_m1_pack/adc_enable_6]
|
|
#connect_bd_net -net controller_m1_adc_enable_c7 [get_bd_pins controller_m1/adc_enable_c7] [get_bd_pins controller_m1_pack/adc_enable_7]
|
|
|
|
#connect_bd_net -net controller_m1_adc_valid_c0 [get_bd_pins controller_m1/adc_valid_c0] [get_bd_pins controller_m1_pack/adc_valid_0]
|
|
#connect_bd_net -net controller_m1_adc_valid_c1 [get_bd_pins controller_m1/adc_valid_c1] [get_bd_pins controller_m1_pack/adc_valid_1]
|
|
#connect_bd_net -net controller_m1_adc_valid_c2 [get_bd_pins controller_m1/adc_valid_c2] [get_bd_pins controller_m1_pack/adc_valid_2]
|
|
#connect_bd_net -net controller_m1_adc_valid_c3 [get_bd_pins controller_m1/adc_valid_c3] [get_bd_pins controller_m1_pack/adc_valid_3]
|
|
#connect_bd_net -net controller_m1_adc_valid_c4 [get_bd_pins controller_m1/adc_valid_c4] [get_bd_pins controller_m1_pack/adc_valid_4]
|
|
#connect_bd_net -net controller_m1_adc_valid_c5 [get_bd_pins controller_m1/adc_valid_c5] [get_bd_pins controller_m1_pack/adc_valid_5]
|
|
#connect_bd_net -net controller_m1_adc_valid_c6 [get_bd_pins controller_m1/adc_valid_c6] [get_bd_pins controller_m1_pack/adc_valid_6]
|
|
#connect_bd_net -net controller_m1_adc_valid_c7 [get_bd_pins controller_m1/adc_valid_c7] [get_bd_pins controller_m1_pack/adc_valid_7]
|
|
|
|
#connect_bd_net -net controller_m1_data_c0 [get_bd_pins controller_m1/adc_data_c0] [get_bd_pins controller_m1_pack/adc_data_0]
|
|
#connect_bd_net -net controller_m1_data_c1 [get_bd_pins controller_m1/adc_data_c1] [get_bd_pins controller_m1_pack/adc_data_1]
|
|
#connect_bd_net -net controller_m1_data_c2 [get_bd_pins controller_m1/adc_data_c2] [get_bd_pins controller_m1_pack/adc_data_2]
|
|
#connect_bd_net -net controller_m1_data_c3 [get_bd_pins controller_m1/adc_data_c3] [get_bd_pins controller_m1_pack/adc_data_3]
|
|
#connect_bd_net -net controller_m1_data_c4 [get_bd_pins controller_m1/adc_data_c4] [get_bd_pins controller_m1_pack/adc_data_4]
|
|
#connect_bd_net -net controller_m1_data_c5 [get_bd_pins controller_m1/adc_data_c5] [get_bd_pins controller_m1_pack/adc_data_5]
|
|
#connect_bd_net -net controller_m1_data_c6 [get_bd_pins controller_m1/adc_data_c6] [get_bd_pins controller_m1_pack/adc_data_6]
|
|
#connect_bd_net -net controller_m1_data_c7 [get_bd_pins controller_m1/adc_data_c7] [get_bd_pins controller_m1_pack/adc_data_7]
|
|
|
|
#connect_bd_net [get_bd_pins controller_m1_pack/adc_data] [get_bd_pins controller_m1_dma/fifo_wr_din]
|
|
#connect_bd_net [get_bd_pins controller_m1_pack/adc_valid] [get_bd_pins controller_m1_dma/fifo_wr_en]
|
|
|
|
ad_connect sys_cpu_clk controller_m1_apack/clk
|
|
|
|
ad_connect controller_m1/adc_enable_c0 controller_m1_apack/chan_enable_0
|
|
ad_connect controller_m1/adc_enable_c1 controller_m1_apack/chan_enable_1
|
|
ad_connect controller_m1/adc_enable_c2 controller_m1_apack/chan_enable_2
|
|
ad_connect controller_m1/adc_enable_c3 controller_m1_apack/chan_enable_3
|
|
ad_connect controller_m1/adc_enable_c4 controller_m1_apack/chan_enable_4
|
|
ad_connect controller_m1/adc_enable_c5 controller_m1_apack/chan_enable_5
|
|
ad_connect controller_m1/adc_enable_c6 controller_m1_apack/chan_enable_6
|
|
ad_connect controller_m1/adc_enable_c7 controller_m1_apack/chan_enable_7
|
|
|
|
ad_connect controller_m1/adc_valid_c0 controller_m1_apack/chan_valid_0
|
|
ad_connect controller_m1/adc_valid_c1 controller_m1_apack/chan_valid_1
|
|
ad_connect controller_m1/adc_valid_c2 controller_m1_apack/chan_valid_2
|
|
ad_connect controller_m1/adc_valid_c3 controller_m1_apack/chan_valid_3
|
|
ad_connect controller_m1/adc_valid_c4 controller_m1_apack/chan_valid_4
|
|
ad_connect controller_m1/adc_valid_c5 controller_m1_apack/chan_valid_5
|
|
ad_connect controller_m1/adc_valid_c6 controller_m1_apack/chan_valid_6
|
|
ad_connect controller_m1/adc_valid_c7 controller_m1_apack/chan_valid_7
|
|
|
|
ad_connect controller_m1/adc_data_c0 controller_m1_apack/chan_data_0
|
|
ad_connect controller_m1/adc_data_c1 controller_m1_apack/chan_data_1
|
|
ad_connect controller_m1/adc_data_c2 controller_m1_apack/chan_data_2
|
|
ad_connect controller_m1/adc_data_c3 controller_m1_apack/chan_data_3
|
|
ad_connect controller_m1/adc_data_c4 controller_m1_apack/chan_data_4
|
|
ad_connect controller_m1/adc_data_c5 controller_m1_apack/chan_data_5
|
|
ad_connect controller_m1/adc_data_c6 controller_m1_apack/chan_data_6
|
|
ad_connect controller_m1/adc_data_c7 controller_m1_apack/chan_data_7
|
|
|
|
ad_connect controller_m1_apack/ddata controller_m1_dma/fifo_wr_din
|
|
ad_connect controller_m1_apack/dvalid controller_m1_dma/fifo_wr_en
|
|
|
|
# motor 2
|
|
ad_connect sys_cpu_clk controller_m2/ref_clk
|
|
ad_connect controller_m2/ctrl_data_clk sys_audio_clkgen/clk_out5
|
|
|
|
ad_connect sys_cpu_clk controller_m2_dma/fifo_wr_clk
|
|
|
|
ad_connect fmc_m2_en_o controller_m2/fmc_en_o
|
|
ad_connect pwm_m2_al_o controller_m2/pwm_al_o
|
|
ad_connect pwm_m2_ah_o controller_m2/pwm_ah_o
|
|
ad_connect pwm_m2_bl_o controller_m2/pwm_bl_o
|
|
ad_connect pwm_m2_bh_o controller_m2/pwm_bh_o
|
|
ad_connect pwm_m2_cl_o controller_m2/pwm_cl_o
|
|
ad_connect pwm_m2_ch_o controller_m2/pwm_ch_o
|
|
|
|
ad_connect controller_m2/sensors_o speed_detector_m2/hall_bemf_i
|
|
ad_connect controller_m2/position_i speed_detector_m2/position_o
|
|
ad_connect controller_m2/ctrl_data_valid_i current_monitor_m2/i_ready_o
|
|
|
|
#connect_bd_net -net controller_m2_adc_clk_o [get_bd_pins controller_m2_pack/adc_clk] [get_bd_pins controller_m2/adc_clk_o]
|
|
#connect_bd_net -net [get_bd_nets sys_rstgen_peripheral_reset] [get_bd_pins controller_m2_pack/adc_rst] [get_bd_pins sys_rstgen/peripheral_reset]
|
|
|
|
#connect_bd_net -net controller_m2_adc_enable_c0 [get_bd_pins controller_m2/adc_enable_c0] [get_bd_pins controller_m2_pack/adc_enable_0]
|
|
#connect_bd_net -net controller_m2_adc_enable_c1 [get_bd_pins controller_m2/adc_enable_c1] [get_bd_pins controller_m2_pack/adc_enable_1]
|
|
#connect_bd_net -net controller_m2_adc_enable_c2 [get_bd_pins controller_m2/adc_enable_c2] [get_bd_pins controller_m2_pack/adc_enable_2]
|
|
#connect_bd_net -net controller_m2_adc_enable_c3 [get_bd_pins controller_m2/adc_enable_c3] [get_bd_pins controller_m2_pack/adc_enable_3]
|
|
#connect_bd_net -net controller_m2_adc_enable_c4 [get_bd_pins controller_m2/adc_enable_c4] [get_bd_pins controller_m2_pack/adc_enable_4]
|
|
#connect_bd_net -net controller_m2_adc_enable_c5 [get_bd_pins controller_m2/adc_enable_c5] [get_bd_pins controller_m2_pack/adc_enable_5]
|
|
#connect_bd_net -net controller_m2_adc_enable_c6 [get_bd_pins controller_m2/adc_enable_c6] [get_bd_pins controller_m2_pack/adc_enable_6]
|
|
#connect_bd_net -net controller_m2_adc_enable_c7 [get_bd_pins controller_m2/adc_enable_c7] [get_bd_pins controller_m2_pack/adc_enable_7]
|
|
|
|
#connect_bd_net -net controller_m2_adc_valid_c0 [get_bd_pins controller_m2/adc_valid_c0] [get_bd_pins controller_m2_pack/adc_valid_0]
|
|
#connect_bd_net -net controller_m2_adc_valid_c1 [get_bd_pins controller_m2/adc_valid_c1] [get_bd_pins controller_m2_pack/adc_valid_1]
|
|
#connect_bd_net -net controller_m2_adc_valid_c2 [get_bd_pins controller_m2/adc_valid_c2] [get_bd_pins controller_m2_pack/adc_valid_2]
|
|
#connect_bd_net -net controller_m2_adc_valid_c3 [get_bd_pins controller_m2/adc_valid_c3] [get_bd_pins controller_m2_pack/adc_valid_3]
|
|
#connect_bd_net -net controller_m2_adc_valid_c4 [get_bd_pins controller_m2/adc_valid_c4] [get_bd_pins controller_m2_pack/adc_valid_4]
|
|
#connect_bd_net -net controller_m2_adc_valid_c5 [get_bd_pins controller_m2/adc_valid_c5] [get_bd_pins controller_m2_pack/adc_valid_5]
|
|
#connect_bd_net -net controller_m2_adc_valid_c6 [get_bd_pins controller_m2/adc_valid_c6] [get_bd_pins controller_m2_pack/adc_valid_6]
|
|
#connect_bd_net -net controller_m2_adc_valid_c7 [get_bd_pins controller_m2/adc_valid_c7] [get_bd_pins controller_m2_pack/adc_valid_7]
|
|
|
|
#connect_bd_net -net controller_m2_data_c0 [get_bd_pins controller_m2/adc_data_c0] [get_bd_pins controller_m2_pack/adc_data_0]
|
|
#connect_bd_net -net controller_m2_data_c1 [get_bd_pins controller_m2/adc_data_c1] [get_bd_pins controller_m2_pack/adc_data_1]
|
|
#connect_bd_net -net controller_m2_data_c2 [get_bd_pins controller_m2/adc_data_c2] [get_bd_pins controller_m2_pack/adc_data_2]
|
|
#connect_bd_net -net controller_m2_data_c3 [get_bd_pins controller_m2/adc_data_c3] [get_bd_pins controller_m2_pack/adc_data_3]
|
|
#connect_bd_net -net controller_m2_data_c4 [get_bd_pins controller_m2/adc_data_c4] [get_bd_pins controller_m2_pack/adc_data_4]
|
|
#connect_bd_net -net controller_m2_data_c5 [get_bd_pins controller_m2/adc_data_c5] [get_bd_pins controller_m2_pack/adc_data_5]
|
|
#connect_bd_net -net controller_m2_data_c6 [get_bd_pins controller_m2/adc_data_c6] [get_bd_pins controller_m2_pack/adc_data_6]
|
|
#connect_bd_net -net controller_m2_data_c7 [get_bd_pins controller_m2/adc_data_c7] [get_bd_pins controller_m2_pack/adc_data_7]
|
|
|
|
#connect_bd_net [get_bd_pins controller_m2_pack/adc_data] [get_bd_pins controller_m2_dma/fifo_wr_din]
|
|
#connect_bd_net [get_bd_pins controller_m2_pack/adc_valid] [get_bd_pins controller_m2_dma/fifo_wr_en]
|
|
|
|
ad_connect sys_cpu_clk controller_m2_apack/clk
|
|
|
|
ad_connect controller_m2/adc_enable_c0 controller_m2_apack/chan_enable_0
|
|
ad_connect controller_m2/adc_enable_c1 controller_m2_apack/chan_enable_1
|
|
ad_connect controller_m2/adc_enable_c2 controller_m2_apack/chan_enable_2
|
|
ad_connect controller_m2/adc_enable_c3 controller_m2_apack/chan_enable_3
|
|
ad_connect controller_m2/adc_enable_c4 controller_m2_apack/chan_enable_4
|
|
ad_connect controller_m2/adc_enable_c5 controller_m2_apack/chan_enable_5
|
|
ad_connect controller_m2/adc_enable_c6 controller_m2_apack/chan_enable_6
|
|
ad_connect controller_m2/adc_enable_c7 controller_m2_apack/chan_enable_7
|
|
|
|
ad_connect controller_m2/adc_valid_c0 controller_m2_apack/chan_valid_0
|
|
ad_connect controller_m2/adc_valid_c1 controller_m2_apack/chan_valid_1
|
|
ad_connect controller_m2/adc_valid_c2 controller_m2_apack/chan_valid_2
|
|
ad_connect controller_m2/adc_valid_c3 controller_m2_apack/chan_valid_3
|
|
ad_connect controller_m2/adc_valid_c4 controller_m2_apack/chan_valid_4
|
|
ad_connect controller_m2/adc_valid_c5 controller_m2_apack/chan_valid_5
|
|
ad_connect controller_m2/adc_valid_c6 controller_m2_apack/chan_valid_6
|
|
ad_connect controller_m2/adc_valid_c7 controller_m2_apack/chan_valid_7
|
|
|
|
ad_connect controller_m2/adc_data_c0 controller_m2_apack/chan_data_0
|
|
ad_connect controller_m2/adc_data_c1 controller_m2_apack/chan_data_1
|
|
ad_connect controller_m2/adc_data_c2 controller_m2_apack/chan_data_2
|
|
ad_connect controller_m2/adc_data_c3 controller_m2_apack/chan_data_3
|
|
ad_connect controller_m2/adc_data_c4 controller_m2_apack/chan_data_4
|
|
ad_connect controller_m2/adc_data_c5 controller_m2_apack/chan_data_5
|
|
ad_connect controller_m2/adc_data_c6 controller_m2_apack/chan_data_6
|
|
ad_connect controller_m2/adc_data_c7 controller_m2_apack/chan_data_7
|
|
|
|
ad_connect controller_m2_apack/ddata controller_m2_dma/fifo_wr_din
|
|
ad_connect controller_m2_apack/dvalid controller_m2_dma/fifo_wr_en
|
|
|
|
# ethernet
|
|
|
|
|
|
ad_connect sys_200m_clk refclk
|
|
ad_connect sys_cpu_resetn refclk_rst
|
|
ad_connect sys_cpu_resetn eth_phy_rst_n
|
|
ad_connect sys_ps7/ENET0_MDIO_MDC eth_mdio_mdc
|
|
ad_connect sys_ps7/ENET0_MDIO_O eth_mdio_o
|
|
ad_connect sys_ps7/ENET0_MDIO_T eth_mdio_t
|
|
ad_connect sys_ps7/ENET0_MDIO_I eth_mdio_i
|
|
# phy 1
|
|
ad_connect sys_200m_clk gmii_to_rgmii_eth1/idelayctrl_clk
|
|
ad_connect gmii_to_rgmii_eth1/gmii sys_ps7/GMII_ETHERNET_0
|
|
ad_connect eth1_rgmii gmii_to_rgmii_eth1/rgmii
|
|
ad_connect gmii_to_rgmii_eth1/reset sys_rstgen/peripheral_reset
|
|
|
|
ad_connect gmii_to_rgmii_eth1/clk_20m sys_audio_clkgen/clk_out4
|
|
ad_connect gmii_to_rgmii_eth1/clk_25m sys_audio_clkgen/clk_out3
|
|
ad_connect gmii_to_rgmii_eth1/clk_125m sys_audio_clkgen/clk_out2
|
|
ad_connect eth_mdio_mdc gmii_to_rgmii_eth1/mdio_mdc
|
|
ad_connect eth_mdio_o gmii_to_rgmii_eth1/mdio_in_w
|
|
ad_connect eth_mdio_i gmii_to_rgmii_eth1/mdio_in_r
|
|
# phy 2
|
|
ad_connect gmii_to_rgmii_eth2/gmii sys_ps7/GMII_ETHERNET_1
|
|
ad_connect eth2_rgmii gmii_to_rgmii_eth2/rgmii
|
|
ad_connect gmii_to_rgmii_eth2/reset sys_rstgen/peripheral_reset
|
|
ad_connect gmii_to_rgmii_eth2/clk_20m sys_audio_clkgen/clk_out4
|
|
ad_connect gmii_to_rgmii_eth2/clk_25m sys_audio_clkgen/clk_out3
|
|
ad_connect gmii_to_rgmii_eth2/clk_125m sys_audio_clkgen/clk_out2
|
|
|
|
ad_connect eth_mdio_mdc gmii_to_rgmii_eth2/mdio_mdc
|
|
ad_connect eth_mdio_o gmii_to_rgmii_eth2/mdio_in_w
|
|
ad_connect eth_mdio_i gmii_to_rgmii_eth2/mdio_in_r
|
|
|
|
# xadc
|
|
ad_connect xadc_core/Vaux0 vaux0
|
|
ad_connect xadc_core/Vaux8 vaux8
|
|
#connect_bd_net -net xadc_muxout [get_bd_pins /xadc_core/muxaddr_out] [get_bd_ports muxaddr_out]
|
|
|
|
# iic
|
|
ad_connect iic_ee2/IIC iic_ee2
|
|
|
|
ad_connect sys_cpu_resetn speed_detector_m1_dma/m_dest_axi_aresetn
|
|
ad_connect sys_cpu_resetn speed_detector_m2_dma/m_dest_axi_aresetn
|
|
ad_connect sys_cpu_resetn current_monitor_m1_dma/m_dest_axi_aresetn
|
|
ad_connect sys_cpu_resetn current_monitor_m2_dma/m_dest_axi_aresetn
|
|
ad_connect sys_cpu_resetn controller_m1_dma/m_dest_axi_aresetn
|
|
ad_connect sys_cpu_resetn controller_m2_dma/m_dest_axi_aresetn
|
|
|
|
# address map
|
|
ad_cpu_interconnect 0x40410000 speed_detector_m1
|
|
ad_cpu_interconnect 0x40420000 current_monitor_m1
|
|
ad_cpu_interconnect 0x40430000 controller_m1
|
|
ad_cpu_interconnect 0x40440000 speed_detector_m2
|
|
ad_cpu_interconnect 0x40450000 current_monitor_m2
|
|
ad_cpu_interconnect 0x40460000 controller_m2
|
|
ad_cpu_interconnect 0x40510000 speed_detector_m1_dma
|
|
ad_cpu_interconnect 0x40520000 current_monitor_m1_dma
|
|
ad_cpu_interconnect 0x40530000 controller_m1_dma
|
|
ad_cpu_interconnect 0x40540000 speed_detector_m2_dma
|
|
ad_cpu_interconnect 0x40550000 current_monitor_m2_dma
|
|
ad_cpu_interconnect 0x40560000 controller_m2_dma
|
|
ad_cpu_interconnect 0x43200000 xadc_core
|
|
ad_cpu_interconnect 0x41510000 iic_ee2
|
|
|
|
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
|
|
ad_mem_hp1_interconnect sys_cpu_clk speed_detector_m1_dma/m_dest_axi
|
|
ad_mem_hp1_interconnect sys_cpu_clk speed_detector_m2_dma/m_dest_axi
|
|
ad_mem_hp1_interconnect sys_cpu_clk current_monitor_m1_dma/m_dest_axi
|
|
ad_mem_hp1_interconnect sys_cpu_clk current_monitor_m2_dma/m_dest_axi
|
|
ad_mem_hp1_interconnect sys_cpu_clk controller_m1_dma/m_dest_axi
|
|
ad_mem_hp1_interconnect sys_cpu_clk controller_m2_dma/m_dest_axi
|
|
|
|
ad_cpu_interrupt ps-6 mb-6 controller_m2_dma/irq
|
|
ad_cpu_interrupt ps-7 mb-7 current_monitor_m2_dma/irq
|
|
ad_cpu_interrupt ps-8 mb-8 speed_detector_m2_dma/irq
|
|
ad_cpu_interrupt ps-9 mb-9 controller_m1_dma/irq
|
|
ad_cpu_interrupt ps-10 mb-10 current_monitor_m1_dma/irq
|
|
ad_cpu_interrupt ps-12 mb-12 iic_ee2/iic2intc_irpt
|
|
ad_cpu_interrupt ps-13 mb-13 speed_detector_m1_dma/irq
|