pluto_hdl_adi/library/xilinx/axi_dacfifo/axi_dacfifo_wr.v

568 lines
22 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_dacfifo_wr #(
parameter AXI_DATA_WIDTH = 512,
parameter DMA_DATA_WIDTH = 64,
parameter AXI_SIZE = 6,
parameter AXI_LENGTH = 15,
parameter AXI_ADDRESS = 32'h00000000,
parameter AXI_ADDRESS_LIMIT = 32'h00000000,
parameter DMA_MEM_ADDRESS_WIDTH = 8
) (
// dma fifo interface
input dma_clk,
input dma_rst,
input [(DMA_DATA_WIDTH-1):0] dma_data,
input dma_ready,
output reg dma_ready_out,
input dma_valid,
// request and syncronizaiton
input dma_xfer_req,
input dma_xfer_last,
(* dont_touch = "true" *) output reg [ 3:0] dma_last_beats,
// last address for read side
output reg [31:0] axi_last_addr,
output reg [ 7:0] axi_last_beats,
output reg axi_xfer_out,
// axi write address, write data and write response channels
input axi_clk,
input axi_resetn,
output reg axi_awvalid,
output [ 3:0] axi_awid,
output [ 1:0] axi_awburst,
output axi_awlock,
output [ 3:0] axi_awcache,
output [ 2:0] axi_awprot,
output [ 3:0] axi_awqos,
output [ 7:0] axi_awlen,
output [ 2:0] axi_awsize,
output reg [31:0] axi_awaddr,
input axi_awready,
output axi_wvalid,
output [(AXI_DATA_WIDTH-1):0] axi_wdata,
output [((AXI_DATA_WIDTH/8)-1):0] axi_wstrb,
output axi_wlast,
input axi_wready,
input axi_bvalid,
input [ 3:0] axi_bid,
input [ 1:0] axi_bresp,
output axi_bready,
output reg axi_werror
);
`define max(a,b) {(a) > (b) ? (a) : (b)}
`define min(a,b) {(a) < (b) ? (a) : (b)}
localparam MIN_WIDTH = `min(AXI_DATA_WIDTH, DMA_DATA_WIDTH);
localparam MAX_WIDTH = `max(AXI_DATA_WIDTH, DMA_DATA_WIDTH);
localparam MEM_RATIO = MAX_WIDTH/MIN_WIDTH;
localparam AXI_BIGGER = (MAX_WIDTH == AXI_DATA_WIDTH) ? 1 : 0;
localparam AXI_MEM_ADDRESS_WIDTH = (MEM_RATIO == 1) ? DMA_MEM_ADDRESS_WIDTH :
(MEM_RATIO == 2) ? (DMA_MEM_ADDRESS_WIDTH + ((AXI_BIGGER == 1) ? (-1) : 1)) :
(MEM_RATIO == 4) ? (DMA_MEM_ADDRESS_WIDTH + ((AXI_BIGGER == 1) ? (-2) : 2)) :
(MEM_RATIO == 8) ? (DMA_MEM_ADDRESS_WIDTH + ((AXI_BIGGER == 1) ? (-3) : 3)) :
(DMA_MEM_ADDRESS_WIDTH + ((AXI_BIGGER == 1) ? (-4) : 4));
localparam AXI_BYTE_WIDTH = AXI_DATA_WIDTH/8;
localparam AXI_AWINCR = (AXI_LENGTH + 1) * AXI_BYTE_WIDTH;
localparam DMA_BUF_THRESHOLD_HI = {(DMA_MEM_ADDRESS_WIDTH){1'b1}} - 4;
// FSM state definition
localparam IDLE = 9'b000000001;
localparam XFER_STAGING = 9'b000000010;
localparam XFER_FULL_BURST = 9'b000000100;
localparam XFER_FB_WLAST = 9'b000001000;
localparam XFER_PARTIAL_BURST = 9'b000010000;
localparam XFER_PB_WLAST = 9'b000100000;
localparam XFER_LAST_BURST = 9'b001000000;
localparam XFER_LB_WLAST = 9'b010000000;
localparam XFER_END = 9'b100000000;
// registers
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr_g = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_addr_diff = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m1 = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m2 = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr = 'd0;
reg [ 2:0] dma_mem_last_read_toggle_m = 3'b0;
reg [ 1:0] dma_xfer_req_d = 2'b0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m1 = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m2 = 'd0;
reg [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr = 'd0;
reg axi_mem_rvalid = 1'b0;
reg axi_mem_rvalid_d = 1'b0;
reg axi_mem_last = 1'b0;
reg axi_mem_last_d = 1'b0;
reg [(AXI_DATA_WIDTH-1):0] axi_mem_rdata = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr = 'd0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr_g = 'd0;
reg axi_mem_read_en_d = 1'b0;
reg [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_addr_diff = 'd0;
reg axi_mem_last_read_toggle = 1'b0;
reg [ 2:0] axi_xfer_req_m = 3'b0;
reg axi_xfer_posedge = 1'b0;
reg [ 7:0] axi_wvalid_counter = 8'b0;
reg [ 7:0] axi_last_burst_length = 8'b0;
(* dont_touch = "true" *)reg [ 8:0] axi_writer_state = 9'b0;
reg [ 3:0] axi_dma_last_beats_m1 = 4'b0;
reg [ 3:0] axi_dma_last_beats_m2 = 4'b0;
reg axi_xlast;
reg [ 3:0] axi_xfer_pburst_offset = 4'b1111;
// internal signals
wire dma_fifo_reset_s;
wire [(DMA_MEM_ADDRESS_WIDTH):0] dma_mem_addr_diff_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_s;
wire dma_mem_last_read_s;
wire dma_xfer_posedge_s;
wire dma_mem_wea_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] dma_mem_waddr_b2g_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] dma_mem_raddr_m2_g2b_s;
wire axi_mem_read_en_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_s;
wire [AXI_MEM_ADDRESS_WIDTH:0] axi_mem_addr_diff_s;
wire [(AXI_DATA_WIDTH-1):0] axi_mem_rdata_s;
wire axi_mem_rvalid_s;
wire axi_mem_last_s;
wire [(DMA_MEM_ADDRESS_WIDTH-1):0] axi_mem_waddr_m2_g2b_s;
wire [(AXI_MEM_ADDRESS_WIDTH-1):0] axi_mem_raddr_b2g_s;
wire axi_fifo_reset_s;
wire axi_waddr_ready_s;
wire axi_wready_s;
wire axi_partial_burst_s;
wire axi_xlast_s;
wire axi_reset_s;
// Asymmetric memory to transfer data from DMAC interface to AXI Memory Map
// interface
ad_mem_asym #(
.A_ADDRESS_WIDTH (DMA_MEM_ADDRESS_WIDTH),
.A_DATA_WIDTH (DMA_DATA_WIDTH),
.B_ADDRESS_WIDTH (AXI_MEM_ADDRESS_WIDTH),
.B_DATA_WIDTH (AXI_DATA_WIDTH)
) i_mem_asym (
.clka (dma_clk),
.wea (dma_mem_wea_s),
.addra (dma_mem_waddr),
.dina (dma_data),
.clkb (axi_clk),
.reb (1'b1),
.addrb (axi_mem_raddr),
.doutb (axi_mem_rdata_s));
assign axi_reset_s = ~axi_resetn;
ad_axis_inf_rx #(
.DATA_WIDTH(AXI_DATA_WIDTH)
) i_axis_inf (
.clk (axi_clk),
.rst (axi_reset_s),
.valid (axi_mem_rvalid_d),
.last (axi_mem_last_d),
.data (axi_mem_rdata),
.inf_valid (axi_wvalid),
.inf_last (axi_wlast),
.inf_data (axi_wdata),
.inf_ready (axi_wready));
// reset signals - all the registers reset at the positive edge of
// dma_xfer_req
assign dma_xfer_posedge_s = ~dma_xfer_req_d[1] & dma_xfer_req_d[0];
assign dma_fifo_reset_s = (dma_rst == 1'b1) || (dma_xfer_posedge_s == 1'b1);
assign axi_fifo_reset_s = (axi_resetn == 1'b0) || (axi_xfer_posedge == 1'b1);
// DMA beat counter
always @(posedge dma_clk) begin
dma_xfer_req_d <= {dma_xfer_req_d[0], dma_xfer_req};
if (dma_fifo_reset_s == 1'b1) begin
dma_last_beats <= 4'b0;
end else begin
if (dma_mem_wea_s == 1'b1) begin
dma_last_beats <= (AXI_BIGGER == 1) ? ((dma_last_beats < MEM_RATIO-1) ? dma_last_beats + 4'b1 : 4'b0) : 4'b0;
end
end
end
// ASYNC MEM write control
assign dma_mem_addr_diff_s = {1'b1, dma_mem_waddr} - dma_mem_raddr_s;
assign dma_mem_raddr_s = (MEM_RATIO == 1) ? dma_mem_raddr :
(MEM_RATIO == 2) ? ((AXI_BIGGER == 1) ? {dma_mem_raddr, 1'b0} : dma_mem_raddr[AXI_MEM_ADDRESS_WIDTH-1:1]) :
(MEM_RATIO == 4) ? ((AXI_BIGGER == 1) ? {dma_mem_raddr, 2'b0} : dma_mem_raddr[AXI_MEM_ADDRESS_WIDTH-1:2]) :
(MEM_RATIO == 8) ? ((AXI_BIGGER == 1) ? {dma_mem_raddr, 3'b0} : dma_mem_raddr[AXI_MEM_ADDRESS_WIDTH-1:3]) :
((AXI_BIGGER == 1) ? {dma_mem_raddr, 4'b0} : dma_mem_raddr[AXI_MEM_ADDRESS_WIDTH-1:4]);
assign dma_mem_last_read_s = dma_mem_last_read_toggle_m[2] ^ dma_mem_last_read_toggle_m[1];
assign dma_mem_wea_s = dma_xfer_req & dma_valid & dma_ready;
always @(posedge dma_clk) begin
if (dma_fifo_reset_s == 1'b1) begin
dma_mem_waddr <= 'h0;
dma_mem_waddr_g <= 'h0;
dma_mem_last_read_toggle_m <= 3'b0;
end else begin
dma_mem_last_read_toggle_m = {dma_mem_last_read_toggle_m[1:0], axi_mem_last_read_toggle};
if (dma_mem_wea_s == 1'b1) begin
dma_mem_waddr <= dma_mem_waddr + 1;
end
if (dma_mem_last_read_s == 1'b1) begin
dma_mem_waddr <= 'h0;
end
dma_mem_waddr_g <= dma_mem_waddr_b2g_s;
end
end
ad_b2g #(
.DATA_WIDTH(DMA_MEM_ADDRESS_WIDTH)
) i_dma_mem_waddr_b2g (
.din (dma_mem_waddr),
.dout (dma_mem_waddr_b2g_s));
// The memory module request data until reaches the high threshold
always @(posedge dma_clk) begin
if (dma_fifo_reset_s == 1'b1) begin
dma_mem_addr_diff <= 'b0;
dma_mem_raddr_m1 <= 'b0;
dma_mem_raddr_m2 <= 'b0;
dma_mem_raddr <= 'b0;
dma_ready_out <= 1'b1;
end else begin
dma_mem_raddr_m1 <= axi_mem_raddr_g;
dma_mem_raddr_m2 <= dma_mem_raddr_m1;
dma_mem_raddr <= dma_mem_raddr_m2_g2b_s;
dma_mem_addr_diff <= dma_mem_addr_diff_s[DMA_MEM_ADDRESS_WIDTH-1:0];
if (dma_mem_addr_diff >= DMA_BUF_THRESHOLD_HI) begin
dma_ready_out <= 1'b0;
end else begin
dma_ready_out <= 1'b1;
end
end
end
ad_g2b #(
.DATA_WIDTH(AXI_MEM_ADDRESS_WIDTH)
) i_dma_mem_raddr_g2b (
.din (dma_mem_raddr_m2),
.dout (dma_mem_raddr_m2_g2b_s));
assign axi_xlast_s = axi_wready & axi_wvalid & axi_wlast;
// FSM to generate the necessary AXI Write transactions
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_writer_state <= IDLE;
axi_xlast <= 1'b0;
end
else
axi_xlast <= axi_xlast_s;
case (axi_writer_state)
IDLE : begin
if (axi_xfer_req_m[2] == 1'b1) begin
axi_writer_state <= XFER_STAGING;
end else begin
axi_writer_state <= IDLE;
end
end
XFER_STAGING : begin
if (axi_xfer_req_m[2] == 1'b1) begin
// there are enough data for one transaction
if (axi_mem_addr_diff >= AXI_LENGTH) begin
axi_writer_state <= XFER_FULL_BURST;
end else begin
axi_writer_state <= XFER_STAGING;
end
end else if (axi_xfer_pburst_offset == 4'b0) begin // DMA transfer was finished
if ((axi_mem_addr_diff > 0) ||
(axi_dma_last_beats_m2 > 0)) begin
axi_writer_state <= XFER_PARTIAL_BURST;
end else begin
axi_writer_state <= XFER_END;
end
end else begin
axi_writer_state <= XFER_STAGING;
end
end
// AXI transaction with full burst length
XFER_FULL_BURST : begin
if ((axi_wvalid_counter == axi_awlen) && (axi_mem_rvalid_s == 1'b1)) begin
axi_writer_state <= XFER_FB_WLAST;
end else begin
axi_writer_state <= XFER_FULL_BURST;
end
end
// Wait for the end of the transaction
XFER_FB_WLAST : begin
if (axi_xlast == 1'b1) begin
axi_writer_state <= XFER_STAGING;
end else begin
axi_writer_state <= XFER_FB_WLAST;
end
end
// AXI transaction with the remaining data, burst length is less than
// the maximum supported burst length
XFER_PARTIAL_BURST : begin
if ((axi_wvalid_counter == axi_awlen) && (axi_mem_rvalid_s == 1'b1)) begin
axi_writer_state <= XFER_PB_WLAST;
end else begin
axi_writer_state <= XFER_PARTIAL_BURST;
end
end
// Wait for the end of the transaction
XFER_PB_WLAST : begin
if (axi_xlast == 1'b1) begin
axi_writer_state <= XFER_END;
end else begin
axi_writer_state <= XFER_PB_WLAST;
end
end
XFER_END : begin
axi_writer_state <= IDLE;
end
default : begin
axi_writer_state <= IDLE;
end
endcase
end
// FSM outputs
assign axi_mem_read_en_s = ((axi_writer_state == XFER_FULL_BURST) ||
(axi_writer_state == XFER_PARTIAL_BURST)) ? 1 : 0;
assign axi_partial_burst_s = ((axi_writer_state == XFER_PARTIAL_BURST) ||
(axi_writer_state == XFER_PB_WLAST)) ? 1 : 0;
// CDC for the memory write address, xfer_req and xfer_last
always @(posedge axi_clk) begin
if (axi_resetn == 1'b0) begin
axi_xfer_req_m <= 3'b0;
axi_xfer_posedge <= 1'b0;
end else begin
axi_xfer_req_m <= {axi_xfer_req_m[1:0], dma_xfer_req};
axi_xfer_posedge <= ~axi_xfer_req_m[2] & axi_xfer_req_m[1];
end
end
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_mem_waddr_m1 <= 'b0;
axi_mem_waddr_m2 <= 'b0;
axi_mem_waddr <= 'b0;
axi_xfer_pburst_offset <= 4'b1111;
end else begin
axi_mem_waddr_m1 <= dma_mem_waddr_g;
axi_mem_waddr_m2 <= axi_mem_waddr_m1;
axi_mem_waddr <= axi_mem_waddr_m2_g2b_s;
if ((axi_xfer_req_m[2] == 0) && (axi_xfer_pburst_offset > 0)) begin
axi_xfer_pburst_offset <= axi_xfer_pburst_offset - 4'b1;
end
end
end
ad_g2b #(
.DATA_WIDTH(DMA_MEM_ADDRESS_WIDTH)
) i_axi_mem_waddr_g2b (
.din (axi_mem_waddr_m2),
.dout (axi_mem_waddr_m2_g2b_s));
// ASYNC MEM read control
assign axi_mem_waddr_s = (MEM_RATIO == 1) ? axi_mem_waddr :
(MEM_RATIO == 2) ? ((AXI_BIGGER == 1) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):1] : {axi_mem_waddr, 1'b0}) :
(MEM_RATIO == 4) ? ((AXI_BIGGER == 1) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):2] : {axi_mem_waddr, 2'b0}) :
(MEM_RATIO == 8) ? ((AXI_BIGGER == 1) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):3] : {axi_mem_waddr, 3'b0}) :
((AXI_BIGGER == 1) ? axi_mem_waddr[(DMA_MEM_ADDRESS_WIDTH-1):4] : {axi_mem_waddr, 4'b0});
assign axi_mem_addr_diff_s = {1'b1, axi_mem_waddr_s} - axi_mem_raddr;
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_mem_addr_diff <= 'b0;
axi_mem_read_en_d <= 1'b0;
end else begin
axi_mem_addr_diff <= axi_mem_addr_diff_s[(AXI_MEM_ADDRESS_WIDTH-1):0];
axi_mem_read_en_d <= axi_mem_read_en_s;
end
end
assign axi_wready_s = ~axi_wvalid | axi_wready;
assign axi_mem_rvalid_s = axi_mem_read_en_s & axi_wready_s;
assign axi_mem_last_s = (axi_wvalid_counter == axi_awlen) ? axi_mem_rvalid_s : 1'b0;
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_mem_rvalid <= 1'b0;
axi_mem_rvalid_d <= 1'b0;
axi_mem_last <= 1'b0;
axi_mem_last_d <= 1'b0;
axi_mem_rdata <= 'b0;
axi_mem_raddr <= 'b0;
axi_wvalid_counter <= 8'b0;
axi_mem_last_read_toggle <= 1'b0;
axi_mem_raddr_g <= 'b0;
end else begin
axi_mem_rvalid <= axi_mem_rvalid_s;
axi_mem_rvalid_d <= axi_mem_rvalid;
axi_mem_last <= axi_mem_last_s;
axi_mem_last_d <= axi_mem_last;
axi_mem_rdata <= axi_mem_rdata_s;
if (axi_mem_rvalid_s == 1'b1) begin
axi_mem_raddr <= axi_mem_raddr + 1;
axi_wvalid_counter <= (axi_wvalid_counter == axi_awlen) ? 0 : axi_wvalid_counter + 1;
end
if (axi_writer_state == XFER_END) begin
axi_mem_raddr <= 'b0;
axi_mem_last_read_toggle <= ~axi_mem_last_read_toggle;
end
axi_mem_raddr_g <= axi_mem_raddr_b2g_s;
end
end
ad_b2g #(
.DATA_WIDTH(AXI_MEM_ADDRESS_WIDTH)
) i_axi_mem_raddr_b2g (
.din (axi_mem_raddr),
.dout (axi_mem_raddr_b2g_s));
// AXI Memory Map interface write address channel
assign axi_awid = 4'b0000;
assign axi_awburst = 2'b01; // INCR (Incrementing address burst)
assign axi_awlock = 1'b0; // Normal access
assign axi_awcache = 4'b0010; // Cacheable, but not allocate
assign axi_awprot = 3'b000; // Normal, secure, data access
assign axi_awqos = 4'b0000; // Not used
assign axi_awlen = (axi_partial_burst_s == 1'b1) ? axi_last_burst_length : AXI_LENGTH;
assign axi_awsize = AXI_SIZE;
assign axi_waddr_ready_s = axi_mem_read_en_s & ~axi_mem_read_en_d;
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_awvalid <= 'd0;
axi_awaddr <= AXI_ADDRESS;
axi_xfer_out <= 1'b0;
end else begin
if (axi_awvalid == 1'b1) begin
if (axi_awready == 1'b1) begin
axi_awvalid <= 1'b0;
end
end else begin
if (axi_waddr_ready_s == 1'b1) begin
axi_awvalid <= 1'b1;
end
end
if ((axi_awvalid == 1'b1) && (axi_awready == 1'b1)) begin
axi_awaddr <= (axi_writer_state == XFER_FULL_BURST) ? (axi_awaddr + AXI_AWINCR) :
(axi_writer_state == XFER_PARTIAL_BURST) ? (axi_awaddr + axi_last_burst_length * AXI_BYTE_WIDTH) :
(axi_awaddr + AXI_AWINCR);
end
if (axi_writer_state == XFER_END) begin
axi_xfer_out <= 1'b1;
end
end
end
// write data channel controls
assign axi_wstrb = {AXI_BYTE_WIDTH{1'b1}};
// response channel
assign axi_bready = 1'b1;
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_werror <= 'd0;
end else begin
axi_werror <= axi_bvalid & axi_bresp[1];
end
end
// AXI last address and last burst length
assign axi_dma_last_beats_active_s = (axi_dma_last_beats_m2 > 0) ? 1'b1 : 1'b0;
always @(posedge axi_clk) begin
if (axi_fifo_reset_s == 1'b1) begin
axi_dma_last_beats_m1 <= 0;
axi_dma_last_beats_m2 <= 0;
axi_last_burst_length <= AXI_LENGTH;
end else begin
axi_dma_last_beats_m1 <= dma_last_beats;
axi_dma_last_beats_m2 <= axi_dma_last_beats_m1;
axi_last_burst_length <= ((axi_partial_burst_s) &&
(axi_waddr_ready_s) &&
(axi_dma_last_beats_active_s)) ? axi_mem_addr_diff :
((axi_partial_burst_s) &&
(axi_waddr_ready_s) &&
(~axi_dma_last_beats_active_s)) ? (axi_mem_addr_diff-1) :
axi_last_burst_length;
end
end
always @(posedge axi_clk) begin
if(axi_fifo_reset_s == 1'b1) begin
axi_last_addr <= AXI_ADDRESS;
axi_last_beats <= 8'b0;
end else begin
if ((axi_awready == 1'b1) && (axi_awvalid == 1'b1)) begin
axi_last_addr <= axi_awaddr & (~AXI_AWINCR+1);
axi_last_beats <= axi_last_burst_length;
end
end
end
endmodule