337 lines
17 KiB
Tcl
337 lines
17 KiB
Tcl
# de10nano carrier qsys
|
|
# system clock
|
|
|
|
add_instance sys_clk clock_source
|
|
set_instance_parameter_value sys_clk {clockFrequency} {50000000.0}
|
|
set_instance_parameter_value sys_clk {clockFrequencyKnown} {1}
|
|
set_instance_parameter_value sys_clk {resetSynchronousEdges} {NONE}
|
|
add_interface sys_clk clock sink
|
|
add_interface sys_rst reset sink
|
|
set_interface_property sys_clk EXPORT_OF sys_clk.clk_in
|
|
set_interface_property sys_rst EXPORT_OF sys_clk.clk_in_reset
|
|
|
|
# hps
|
|
|
|
add_instance sys_hps altera_hps
|
|
set_instance_parameter_value sys_hps {MPU_EVENTS_Enable} {0}
|
|
set_instance_parameter_value sys_hps {F2SCLK_SDRAMCLK_Enable} {0}
|
|
set_instance_parameter_value sys_hps {F2SDRAM_Type} {AXI-3 AXI-3}
|
|
set_instance_parameter_value sys_hps {F2SDRAM_Width} {128 128}
|
|
set_instance_parameter_value sys_hps {F2SINTERRUPT_Enable} {1}
|
|
set_instance_parameter_value sys_hps {EMAC0_PinMuxing} {Unused}
|
|
set_instance_parameter_value sys_hps {EMAC0_Mode} {N/A}
|
|
set_instance_parameter_value sys_hps {EMAC1_PinMuxing} {HPS I/O Set 0}
|
|
set_instance_parameter_value sys_hps {EMAC1_Mode} {RGMII}
|
|
set_instance_parameter_value sys_hps {SDIO_PinMuxing} {HPS I/O Set 0}
|
|
set_instance_parameter_value sys_hps {SDIO_Mode} {4-bit Data}
|
|
set_instance_parameter_value sys_hps {USB0_PinMuxing} {Unused}
|
|
set_instance_parameter_value sys_hps {USB0_Mode} {N/A}
|
|
set_instance_parameter_value sys_hps {USB1_PinMuxing} {HPS I/O Set 0}
|
|
set_instance_parameter_value sys_hps {USB1_Mode} {SDR}
|
|
set_instance_parameter_value sys_hps {SPIM0_PinMuxing} {Unused}
|
|
set_instance_parameter_value sys_hps {SPIM0_Mode} {N/A}
|
|
set_instance_parameter_value sys_hps {SPIM1_PinMuxing} {HPS I/O Set 0}
|
|
set_instance_parameter_value sys_hps {SPIM1_Mode} {Single Slave Select}
|
|
set_instance_parameter_value sys_hps {UART0_PinMuxing} {HPS I/O Set 0}
|
|
set_instance_parameter_value sys_hps {UART0_Mode} {No Flow Control}
|
|
set_instance_parameter_value sys_hps {UART1_PinMuxing} {Unused}
|
|
set_instance_parameter_value sys_hps {UART1_Mode} {N/A}
|
|
set_instance_parameter_value sys_hps {I2C0_PinMuxing} {FPGA}
|
|
set_instance_parameter_value sys_hps {I2C0_Mode} {Full}
|
|
set_instance_parameter_value sys_hps {I2C1_PinMuxing} {FPGA}
|
|
set_instance_parameter_value sys_hps {I2C1_Mode} {Full}
|
|
set_instance_parameter_value sys_hps {GPIO_Enable} {No No No No No No No No No Yes No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No}
|
|
set_instance_parameter_value sys_hps {LOANIO_Enable} {No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No}
|
|
set_instance_parameter_value sys_hps {desired_cfg_clk_mhz} {80.0}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER0CLK_Enable} {1}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER1CLK_Enable} {1}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER2CLK_Enable} {1}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER0CLK_FREQ} {80.0}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER1CLK_FREQ} {20.0}
|
|
set_instance_parameter_value sys_hps {S2FCLK_USER2CLK_FREQ} {100.0}
|
|
set_instance_parameter_value sys_hps {HPS_PROTOCOL} {DDR3}
|
|
set_instance_parameter_value sys_hps {MEM_CLK_FREQ} {400.0}
|
|
set_instance_parameter_value sys_hps {REF_CLK_FREQ} {25.0}
|
|
set_instance_parameter_value sys_hps {MEM_VOLTAGE} {1.5V DDR3}
|
|
set_instance_parameter_value sys_hps {MEM_CLK_FREQ_MAX} {800.0}
|
|
set_instance_parameter_value sys_hps {MEM_DQ_WIDTH} {32}
|
|
set_instance_parameter_value sys_hps {MEM_ROW_ADDR_WIDTH} {15}
|
|
set_instance_parameter_value sys_hps {MEM_COL_ADDR_WIDTH} {10}
|
|
set_instance_parameter_value sys_hps {MEM_BANKADDR_WIDTH} {3}
|
|
set_instance_parameter_value sys_hps {MEM_TCL} {7}
|
|
set_instance_parameter_value sys_hps {MEM_DRV_STR} {RZQ/6}
|
|
set_instance_parameter_value sys_hps {MEM_RTT_NOM} {RZQ/6}
|
|
set_instance_parameter_value sys_hps {MEM_WTCL} {7}
|
|
set_instance_parameter_value sys_hps {MEM_RTT_WR} {Dynamic ODT off}
|
|
set_instance_parameter_value sys_hps {TIMING_TIS} {175}
|
|
set_instance_parameter_value sys_hps {TIMING_TIH} {250}
|
|
set_instance_parameter_value sys_hps {TIMING_TDS} {50}
|
|
set_instance_parameter_value sys_hps {TIMING_TDH} {125}
|
|
set_instance_parameter_value sys_hps {TIMING_TDQSQ} {120}
|
|
set_instance_parameter_value sys_hps {TIMING_TQH} {0.38}
|
|
set_instance_parameter_value sys_hps {TIMING_TDQSCK} {400}
|
|
set_instance_parameter_value sys_hps {TIMING_TDQSS} {0.25}
|
|
set_instance_parameter_value sys_hps {TIMING_TQSH} {0.38}
|
|
set_instance_parameter_value sys_hps {TIMING_TDSH} {0.2}
|
|
set_instance_parameter_value sys_hps {TIMING_TDSS} {0.2}
|
|
set_instance_parameter_value sys_hps {MEM_TINIT_US} {500}
|
|
set_instance_parameter_value sys_hps {MEM_TMRD_CK} {4}
|
|
set_instance_parameter_value sys_hps {MEM_TRAS_NS} {35.0}
|
|
set_instance_parameter_value sys_hps {MEM_TRCD_NS} {13.75}
|
|
set_instance_parameter_value sys_hps {MEM_TRP_NS} {13.75}
|
|
set_instance_parameter_value sys_hps {MEM_TREFI_US} {7.8}
|
|
set_instance_parameter_value sys_hps {MEM_TRFC_NS} {300.0}
|
|
set_instance_parameter_value sys_hps {MEM_TWR_NS} {15.0}
|
|
set_instance_parameter_value sys_hps {MEM_TWTR} {4}
|
|
set_instance_parameter_value sys_hps {MEM_TFAW_NS} {37.5}
|
|
set_instance_parameter_value sys_hps {MEM_TRRD_NS} {7.5}
|
|
set_instance_parameter_value sys_hps {MEM_TRTP_NS} {7.5}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_MAX_CK_DELAY} {0.6}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_MAX_DQS_DELAY} {0.6}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_CKDQS_DIMM_MIN} {-0.01}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_CKDQS_DIMM_MAX} {0.01}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_WITHIN_DQS} {0.02}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_SKEW_BETWEEN_DQS} {0.02}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_DQ_TO_DQS_SKEW} {0.0}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_AC_SKEW} {0.02}
|
|
set_instance_parameter_value sys_hps {TIMING_BOARD_AC_TO_CK_SKEW} {0.0}
|
|
add_interface sys_hps_memory conduit end
|
|
set_interface_property sys_hps_memory EXPORT_OF sys_hps.memory
|
|
add_interface sys_hps_hps_io conduit end
|
|
set_interface_property sys_hps_hps_io EXPORT_OF sys_hps.hps_io
|
|
add_interface sys_hps_h2f_reset reset source
|
|
set_interface_property sys_hps_h2f_reset EXPORT_OF sys_hps.h2f_reset
|
|
add_connection sys_clk.clk sys_hps.h2f_axi_clock
|
|
add_connection sys_clk.clk sys_hps.f2h_axi_clock
|
|
add_connection sys_clk.clk sys_hps.h2f_lw_axi_clock
|
|
add_interface sys_hps_i2c0 conduit end
|
|
set_interface_property sys_hps_i2c0 EXPORT_OF sys_hps.i2c0
|
|
add_interface sys_hps_i2c0_clk clock source
|
|
set_interface_property sys_hps_i2c0_clk EXPORT_OF sys_hps.i2c0_clk
|
|
add_interface sys_hps_i2c0_scl_in clock sink
|
|
set_interface_property sys_hps_i2c0_scl_in EXPORT_OF sys_hps.i2c0_scl_in
|
|
add_interface sys_hps_i2c1 conduit end
|
|
set_interface_property sys_hps_i2c1 EXPORT_OF sys_hps.i2c1
|
|
add_interface sys_hps_i2c1_clk clock source
|
|
set_interface_property sys_hps_i2c1_clk EXPORT_OF sys_hps.i2c1_clk
|
|
add_interface sys_hps_i2c1_scl_in clock sink
|
|
set_interface_property sys_hps_i2c1_scl_in EXPORT_OF sys_hps.i2c1_scl_in
|
|
|
|
# cpu/hps handling
|
|
|
|
proc ad_cpu_interrupt {m_irq m_port} {
|
|
|
|
add_connection sys_hps.f2h_irq0 ${m_port}
|
|
set_connection_parameter_value sys_hps.f2h_irq0/${m_port} irqNumber ${m_irq}
|
|
}
|
|
|
|
proc ad_cpu_interconnect {m_base m_port} {
|
|
|
|
add_connection sys_hps.h2f_lw_axi_master ${m_port}
|
|
set_connection_parameter_value sys_hps.h2f_lw_axi_master/${m_port} baseAddress ${m_base}
|
|
}
|
|
|
|
proc ad_dma_interconnect {m_port} {
|
|
|
|
add_connection ${m_port} sys_hps.f2h_sdram1_data
|
|
set_connection_parameter_value ${m_port}/sys_hps.f2h_sdram1_data baseAddress {0x0000}
|
|
|
|
}
|
|
|
|
# common dma interfaces clock
|
|
|
|
add_instance sys_dma_clk clock_source
|
|
add_connection sys_hps.h2f_user0_clock sys_dma_clk.clk_in
|
|
add_connection sys_clk.clk_reset sys_dma_clk.clk_in_reset
|
|
add_connection sys_dma_clk.clk sys_hps.f2h_sdram1_clock
|
|
|
|
# internal memory
|
|
|
|
add_instance sys_int_mem altera_avalon_onchip_memory2
|
|
set_instance_parameter_value sys_int_mem {dualPort} {0}
|
|
set_instance_parameter_value sys_int_mem {dataWidth} {64}
|
|
set_instance_parameter_value sys_int_mem {memorySize} {65536.0}
|
|
set_instance_parameter_value sys_int_mem {initMemContent} {0}
|
|
add_connection sys_clk.clk sys_int_mem.clk1
|
|
add_connection sys_clk.clk_reset sys_int_mem.reset1
|
|
add_connection sys_hps.h2f_axi_master sys_int_mem.s1
|
|
set_connection_parameter_value sys_hps.h2f_axi_master/sys_int_mem.s1 baseAddress {0x0000}
|
|
|
|
# id
|
|
|
|
add_instance sys_id altera_avalon_sysid_qsys
|
|
set_instance_parameter_value sys_id {id} {-1395322110}
|
|
add_connection sys_clk.clk sys_id.clk
|
|
add_connection sys_clk.clk_reset sys_id.reset
|
|
|
|
# gpio-bd
|
|
|
|
add_instance sys_gpio_bd altera_avalon_pio
|
|
set_instance_parameter_value sys_gpio_bd {direction} {InOut}
|
|
set_instance_parameter_value sys_gpio_bd {generateIRQ} {1}
|
|
set_instance_parameter_value sys_gpio_bd {width} {32}
|
|
add_connection sys_clk.clk sys_gpio_bd.clk
|
|
add_connection sys_clk.clk_reset sys_gpio_bd.reset
|
|
add_interface sys_gpio_bd conduit end
|
|
set_interface_property sys_gpio_bd EXPORT_OF sys_gpio_bd.external_connection
|
|
|
|
# gpio-in
|
|
|
|
add_instance sys_gpio_in altera_avalon_pio
|
|
set_instance_parameter_value sys_gpio_in {direction} {Input}
|
|
set_instance_parameter_value sys_gpio_in {generateIRQ} {1}
|
|
set_instance_parameter_value sys_gpio_in {width} {32}
|
|
add_connection sys_clk.clk_reset sys_gpio_in.reset
|
|
add_connection sys_clk.clk sys_gpio_in.clk
|
|
add_interface sys_gpio_in conduit end
|
|
set_interface_property sys_gpio_in EXPORT_OF sys_gpio_in.external_connection
|
|
|
|
# gpio-out
|
|
|
|
add_instance sys_gpio_out altera_avalon_pio
|
|
set_instance_parameter_value sys_gpio_out {direction} {Output}
|
|
set_instance_parameter_value sys_gpio_out {generateIRQ} {0}
|
|
set_instance_parameter_value sys_gpio_out {width} {32}
|
|
add_connection sys_clk.clk_reset sys_gpio_out.reset
|
|
add_connection sys_clk.clk sys_gpio_out.clk
|
|
add_interface sys_gpio_out conduit end
|
|
set_interface_property sys_gpio_out EXPORT_OF sys_gpio_out.external_connection
|
|
|
|
# spi
|
|
|
|
add_instance sys_spi altera_avalon_spi
|
|
set_instance_parameter_value sys_spi {clockPhase} {0}
|
|
set_instance_parameter_value sys_spi {clockPolarity} {1}
|
|
set_instance_parameter_value sys_spi {dataWidth} {8}
|
|
set_instance_parameter_value sys_spi {masterSPI} {1}
|
|
set_instance_parameter_value sys_spi {numberOfSlaves} {1}
|
|
set_instance_parameter_value sys_spi {targetClockRate} {50000000.0}
|
|
add_connection sys_clk.clk sys_spi.clk
|
|
add_connection sys_clk.clk_reset sys_spi.reset
|
|
add_interface sys_spi conduit end
|
|
set_interface_property sys_spi EXPORT_OF sys_spi.external
|
|
|
|
# spi for LTC2308
|
|
|
|
add_instance ltc2308_spi altera_avalon_spi
|
|
set_instance_parameter_value ltc2308_spi {clockPhase} {0}
|
|
set_instance_parameter_value ltc2308_spi {clockPolarity} {0}
|
|
set_instance_parameter_value ltc2308_spi {dataWidth} {12}
|
|
set_instance_parameter_value ltc2308_spi {masterSPI} {1}
|
|
set_instance_parameter_value ltc2308_spi {numberOfSlaves} {1}
|
|
set_instance_parameter_value ltc2308_spi {targetClockRate} {50000000.0}
|
|
add_connection sys_clk.clk ltc2308_spi.clk
|
|
add_connection sys_clk.clk_reset ltc2308_spi.reset
|
|
add_interface ltc2308_spi conduit end
|
|
set_interface_property ltc2308_spi EXPORT_OF ltc2308_spi.external
|
|
|
|
# hdmi
|
|
|
|
add_instance axi_hdmi_tx_0 axi_hdmi_tx 1.0
|
|
set_instance_parameter_value axi_hdmi_tx_0 {CR_CB_N} {0}
|
|
set_instance_parameter_value axi_hdmi_tx_0 {INTERFACE} {24_BIT}
|
|
set_instance_parameter_value axi_hdmi_tx_0 {ID} {0}
|
|
|
|
add_interface axi_hdmi_tx_0_hdmi_if conduit end
|
|
set_interface_property axi_hdmi_tx_0_hdmi_if EXPORT_OF axi_hdmi_tx_0.hdmi_if
|
|
|
|
add_instance pixel_clk_pll altera_pll
|
|
set_instance_parameter_value pixel_clk_pll {gui_feedback_clock} {Global Clock}
|
|
set_instance_parameter_value pixel_clk_pll {gui_operation_mode} {direct}
|
|
set_instance_parameter_value pixel_clk_pll {gui_number_of_clocks} {2}
|
|
set_instance_parameter_value pixel_clk_pll {gui_output_clock_frequency0} {148.5}
|
|
set_instance_parameter_value pixel_clk_pll {gui_output_clock_frequency1} {200}
|
|
set_instance_parameter_value pixel_clk_pll {gui_phase_shift0} {0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_phase_shift1} {0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_phase_shift_deg0} {0.0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_phase_shift_deg1} {0.0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_phout_division} {1}
|
|
set_instance_parameter_value pixel_clk_pll {gui_pll_auto_reset} {Off}
|
|
set_instance_parameter_value pixel_clk_pll {gui_pll_bandwidth_preset} {Auto}
|
|
set_instance_parameter_value pixel_clk_pll {gui_pll_mode} {Fractional-N PLL}
|
|
set_instance_parameter_value pixel_clk_pll {gui_ps_units0} {ps}
|
|
set_instance_parameter_value pixel_clk_pll {gui_refclk_switch} {0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_reference_clock_frequency} {50.0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_switchover_delay} {0}
|
|
set_instance_parameter_value pixel_clk_pll {gui_en_reconf} {1}
|
|
|
|
add_instance pixel_clk_pll_reconfig altera_pll_reconfig
|
|
set_instance_parameter_value pixel_clk_pll_reconfig {ENABLE_BYTEENABLE} {0}
|
|
set_instance_parameter_value pixel_clk_pll_reconfig {ENABLE_MIF} {0}
|
|
set_instance_parameter_value pixel_clk_pll_reconfig {MIF_FILE_NAME} {}
|
|
|
|
add_connection pixel_clk_pll.reconfig_from_pll pixel_clk_pll_reconfig.reconfig_from_pll
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll endPort {}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll endPortLSB {0}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll startPort {}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll startPortLSB {0}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_from_pll/pixel_clk_pll_reconfig.reconfig_from_pll width {0}
|
|
|
|
add_connection pixel_clk_pll.reconfig_to_pll pixel_clk_pll_reconfig.reconfig_to_pll
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll endPort {}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll endPortLSB {0}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll startPort {}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll startPortLSB {0}
|
|
set_connection_parameter_value pixel_clk_pll.reconfig_to_pll/pixel_clk_pll_reconfig.reconfig_to_pll width {0}
|
|
|
|
add_instance video_dmac axi_dmac
|
|
set_instance_parameter_value video_dmac {ASYNC_CLK_DEST_REQ_MANUAL} {1}
|
|
set_instance_parameter_value video_dmac {ASYNC_CLK_REQ_SRC_MANUAL} {1}
|
|
set_instance_parameter_value video_dmac {ASYNC_CLK_SRC_DEST_MANUAL} {1}
|
|
set_instance_parameter_value video_dmac {AUTO_ASYNC_CLK} {1}
|
|
set_instance_parameter_value video_dmac {AXI_SLICE_DEST} {0}
|
|
set_instance_parameter_value video_dmac {AXI_SLICE_SRC} {0}
|
|
set_instance_parameter_value video_dmac {CYCLIC} {1}
|
|
set_instance_parameter_value video_dmac {HAS_AXIS_TLAST} {1}
|
|
set_instance_parameter_value video_dmac {DMA_2D_TRANSFER} {1}
|
|
set_instance_parameter_value video_dmac {DMA_DATA_WIDTH_DEST} {64}
|
|
set_instance_parameter_value video_dmac {DMA_DATA_WIDTH_SRC} {128}
|
|
set_instance_parameter_value video_dmac {DMA_LENGTH_WIDTH} {24}
|
|
set_instance_parameter_value video_dmac {DMA_TYPE_DEST} {1}
|
|
set_instance_parameter_value video_dmac {DMA_TYPE_SRC} {0}
|
|
set_instance_parameter_value video_dmac {FIFO_SIZE} {8}
|
|
set_instance_parameter_value video_dmac {ID} {0}
|
|
set_instance_parameter_value video_dmac {SYNC_TRANSFER_START} {0}
|
|
|
|
add_connection video_dmac.m_axis axi_hdmi_tx_0.vdma_if axi4stream
|
|
|
|
add_connection sys_clk.clk pixel_clk_pll.refclk
|
|
add_connection sys_clk.clk pixel_clk_pll_reconfig.mgmt_clk
|
|
add_connection sys_clk.clk axi_hdmi_tx_0.s_axi_clock
|
|
add_connection sys_clk.clk video_dmac.s_axi_clock
|
|
add_connection pixel_clk_pll.outclk1 video_dmac.m_src_axi_clock
|
|
add_connection pixel_clk_pll.outclk1 video_dmac.if_m_axis_aclk
|
|
add_connection pixel_clk_pll.outclk1 sys_hps.f2h_sdram0_clock
|
|
add_connection pixel_clk_pll.outclk1 axi_hdmi_tx_0.vdma_clock
|
|
add_connection pixel_clk_pll.outclk0 axi_hdmi_tx_0.reference_clk
|
|
|
|
add_connection sys_clk.clk_reset pixel_clk_pll.reset
|
|
add_connection sys_clk.clk_reset pixel_clk_pll_reconfig.mgmt_reset
|
|
add_connection sys_clk.clk_reset axi_hdmi_tx_0.s_axi_reset
|
|
add_connection sys_clk.clk_reset video_dmac.m_src_axi_reset
|
|
add_connection sys_clk.clk_reset video_dmac.s_axi_reset
|
|
|
|
add_connection video_dmac.m_src_axi sys_hps.f2h_sdram0_data
|
|
set_connection_parameter_value video_dmac.m_src_axi/sys_hps.f2h_sdram0_data baseAddress {0x0000}
|
|
|
|
# interrupts
|
|
|
|
ad_cpu_interrupt 0 sys_gpio_bd.irq
|
|
ad_cpu_interrupt 1 sys_spi.irq
|
|
ad_cpu_interrupt 2 sys_gpio_in.irq
|
|
ad_cpu_interrupt 3 ltc2308_spi.irq
|
|
ad_cpu_interrupt 7 video_dmac.interrupt_sender
|
|
|
|
# cpu interconnects
|
|
|
|
ad_cpu_interconnect 0x00108000 sys_spi.spi_control_port
|
|
ad_cpu_interconnect 0x00010000 sys_id.control_slave
|
|
ad_cpu_interconnect 0x00010080 sys_gpio_bd.s1
|
|
ad_cpu_interconnect 0x00010100 sys_gpio_in.s1
|
|
ad_cpu_interconnect 0x00080000 video_dmac.s_axi
|
|
ad_cpu_interconnect 0x00090000 axi_hdmi_tx_0.s_axi
|
|
ad_cpu_interconnect 0x00100000 pixel_clk_pll_reconfig.mgmt_avalon_slave
|
|
ad_cpu_interconnect 0x00109000 sys_gpio_out.s1
|
|
ad_cpu_interconnect 0x0010A000 ltc2308_spi.spi_control_port
|
|
|