pluto_hdl_adi/projects/fmcomms11/common/fmcomms11_spi.v

119 lines
3.9 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module fmcomms11_spi (
// 4 wire
input [ 2:0] spi_csn,
input spi_clk,
input spi_mosi,
output spi_miso,
// 3 wire
output spi_csn_ad9625,
output spi_csn_ad9162,
output spi_csn_ad9508,
output spi_csn_adl5240,
output spi_csn_adf4355,
output spi_csn_hmc1119,
inout spi_sdio,
output spi_dir
);
// internal registers
reg [ 5:0] spi_count = 'd0;
reg spi_rd_wr_n = 'd0;
reg spi_enable = 'd0;
// internal signals
wire [ 5:0] spi_csn6_s;
wire spi_csn_s;
wire spi_enable_s;
// check on rising edge and change on falling edge
assign spi_csn_ad9625 = spi_csn6_s[0];
assign spi_csn_ad9162 = spi_csn6_s[1];
assign spi_csn_ad9508 = spi_csn6_s[2];
assign spi_csn_adl5240 = spi_csn6_s[3];
assign spi_csn_adf4355 = spi_csn6_s[4];
assign spi_csn_hmc1119 = spi_csn6_s[5];
assign spi_csn6_s[0] = (spi_csn == 3'b001) ? 1'b0 : 1'b1;
assign spi_csn6_s[1] = (spi_csn == 3'b010) ? 1'b0 : 1'b1;
assign spi_csn6_s[2] = (spi_csn == 3'b011) ? 1'b0 : 1'b1;
assign spi_csn6_s[3] = (spi_csn == 3'b100) ? 1'b0 : 1'b1;
assign spi_csn6_s[4] = (spi_csn == 3'b101) ? 1'b0 : 1'b1;
assign spi_csn6_s[5] = (spi_csn == 3'b110) ? 1'b0 : 1'b1;
assign spi_csn_s = & spi_csn6_s;
assign spi_dir = ~spi_enable_s;
assign spi_enable_s = spi_enable & ~spi_csn_s;
always @(posedge spi_clk or posedge spi_csn_s) begin
if (spi_csn_s == 1'b1) begin
spi_count <= 6'd0;
spi_rd_wr_n <= 1'd0;
end else begin
spi_count <= (spi_count < 6'h3f) ? spi_count + 1'b1 : spi_count;
if (spi_count == 6'd0) begin
spi_rd_wr_n <= spi_mosi;
end
end
end
always @(negedge spi_clk or posedge spi_csn_s) begin
if (spi_csn_s == 1'b1) begin
spi_enable <= 1'b0;
end else begin
if (spi_count == 6'd16) begin
spi_enable <= spi_rd_wr_n;
end
end
end
// io buffer
assign spi_miso = spi_sdio;
assign spi_sdio = (spi_enable_s == 1'b1) ? 1'bz : spi_mosi;
endmodule