380 lines
14 KiB
Verilog
380 lines
14 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2016(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_dacfifo_dac (
|
|
|
|
axi_clk,
|
|
axi_dvalid,
|
|
axi_ddata,
|
|
axi_dready,
|
|
axi_dlast,
|
|
axi_xfer_req,
|
|
|
|
dma_last_beats,
|
|
|
|
dac_clk,
|
|
dac_rst,
|
|
dac_valid,
|
|
dac_data,
|
|
dac_xfer_out,
|
|
dac_dunf
|
|
);
|
|
|
|
// parameters
|
|
|
|
parameter AXI_DATA_WIDTH = 512;
|
|
parameter AXI_LENGTH = 15;
|
|
parameter DAC_DATA_WIDTH = 64;
|
|
|
|
localparam MEM_RATIO = AXI_DATA_WIDTH/DAC_DATA_WIDTH;
|
|
localparam DAC_ADDRESS_WIDTH = 10;
|
|
localparam AXI_ADDRESS_WIDTH = (MEM_RATIO == 1) ? DAC_ADDRESS_WIDTH :
|
|
(MEM_RATIO == 2) ? (DAC_ADDRESS_WIDTH - 1) :
|
|
(MEM_RATIO == 4) ? (DAC_ADDRESS_WIDTH - 2) :
|
|
(DAC_ADDRESS_WIDTH - 3);
|
|
|
|
// BUF_THRESHOLD_LO will make sure that there are always at least two burst in the memmory
|
|
|
|
localparam AXI_BUF_THRESHOLD_LO = 3 * (AXI_LENGTH+1);
|
|
localparam AXI_BUF_THRESHOLD_HI = {(AXI_ADDRESS_WIDTH){1'b1}} - (AXI_LENGTH+1);
|
|
localparam DAC_BUF_THRESHOLD_LO = 3 * (AXI_LENGTH+1) * MEM_RATIO;
|
|
localparam DAC_BUF_THRESHOLD_HI = {(DAC_ADDRESS_WIDTH){1'b1}} - (AXI_LENGTH+1) * MEM_RATIO;
|
|
localparam DAC_ARINCR = (AXI_LENGTH+1) * MEM_RATIO;
|
|
|
|
// dma write
|
|
|
|
input axi_clk;
|
|
input axi_dvalid;
|
|
input [(AXI_DATA_WIDTH-1):0] axi_ddata;
|
|
output axi_dready;
|
|
input axi_dlast;
|
|
input axi_xfer_req;
|
|
|
|
input [ 3:0] dma_last_beats;
|
|
|
|
// dac read
|
|
|
|
input dac_clk;
|
|
input dac_rst;
|
|
input dac_valid;
|
|
output [(DAC_DATA_WIDTH-1):0] dac_data;
|
|
output dac_xfer_out;
|
|
output dac_dunf;
|
|
|
|
// internal registers
|
|
|
|
reg [(AXI_ADDRESS_WIDTH-1):0] axi_mem_waddr = 'd0;
|
|
reg [(AXI_ADDRESS_WIDTH-1):0] axi_mem_laddr = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] axi_mem_waddr_g = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] axi_mem_laddr_g = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] axi_mem_raddr = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] axi_mem_raddr_m1 = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] axi_mem_raddr_m2 = 'd0;
|
|
reg [(AXI_ADDRESS_WIDTH-1):0] axi_mem_addr_diff = 'd0;
|
|
reg axi_dready = 'd0;
|
|
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_raddr = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_raddr_g = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_waddr = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_waddr_m1 = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_waddr_m2 = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_laddr = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_laddr_m1 = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_laddr_m2 = 'd0;
|
|
reg [(DAC_ADDRESS_WIDTH-1):0] dac_mem_addr_diff = 'd0;
|
|
reg dac_mem_init = 1'b0;
|
|
reg dac_mem_init_d = 1'b0;
|
|
reg dac_mem_enable = 1'b0;
|
|
|
|
reg [ 2:0] dac_xfer_req_m = 3'b0;
|
|
reg dac_xfer_init = 1'b0;
|
|
|
|
reg [ 3:0] dac_last_beats = 4'b0;
|
|
reg [ 3:0] dac_last_beats_m = 4'b0;
|
|
reg dac_dunf = 1'b0;
|
|
reg [ 3:0] dac_beat_cnt = 4'b0;
|
|
reg dac_dlast = 1'b0;
|
|
reg dac_dlast_m1 = 1'b0;
|
|
reg dac_dlast_m2 = 1'b0;
|
|
reg dac_dlast_inmem = 1'b0;
|
|
|
|
// internal signals
|
|
|
|
wire [AXI_ADDRESS_WIDTH:0] axi_mem_addr_diff_s;
|
|
wire [(AXI_ADDRESS_WIDTH-1):0] axi_mem_raddr_s;
|
|
wire [(DAC_ADDRESS_WIDTH-1):0] axi_mem_waddr_s;
|
|
wire [(DAC_ADDRESS_WIDTH-1):0] axi_mem_laddr_s;
|
|
|
|
wire [DAC_ADDRESS_WIDTH:0] dac_mem_addr_diff_s;
|
|
wire dac_mem_valid_s;
|
|
wire dac_xfer_init_s;
|
|
wire dac_last_axi_beats_s;
|
|
|
|
// binary to grey conversion
|
|
|
|
function [9:0] b2g;
|
|
input [9:0] b;
|
|
reg [9:0] g;
|
|
begin
|
|
g[9] = b[9];
|
|
g[8] = b[9] ^ b[8];
|
|
g[7] = b[8] ^ b[7];
|
|
g[6] = b[7] ^ b[6];
|
|
g[5] = b[6] ^ b[5];
|
|
g[4] = b[5] ^ b[4];
|
|
g[3] = b[4] ^ b[3];
|
|
g[2] = b[3] ^ b[2];
|
|
g[1] = b[2] ^ b[1];
|
|
g[0] = b[1] ^ b[0];
|
|
b2g = g;
|
|
end
|
|
endfunction
|
|
|
|
// grey to binary conversion
|
|
|
|
function [9:0] g2b;
|
|
input [9:0] g;
|
|
reg [9:0] b;
|
|
begin
|
|
b[9] = g[9];
|
|
b[8] = b[9] ^ g[8];
|
|
b[7] = b[8] ^ g[7];
|
|
b[6] = b[7] ^ g[6];
|
|
b[5] = b[6] ^ g[5];
|
|
b[4] = b[5] ^ g[4];
|
|
b[3] = b[4] ^ g[3];
|
|
b[2] = b[3] ^ g[2];
|
|
b[1] = b[2] ^ g[1];
|
|
b[0] = b[1] ^ g[0];
|
|
g2b = b;
|
|
end
|
|
endfunction
|
|
|
|
// write interface
|
|
|
|
always @(posedge axi_clk) begin
|
|
if (axi_xfer_req == 1'b0) begin
|
|
axi_mem_waddr <= 'd0;
|
|
axi_mem_waddr_g <= 'd0;
|
|
axi_mem_laddr <= {AXI_ADDRESS_WIDTH{1'b1}};
|
|
end else begin
|
|
if (axi_dvalid == 1'b1) begin
|
|
axi_mem_waddr <= axi_mem_waddr + 1'b1;
|
|
axi_mem_laddr <= (axi_dlast == 1'b1) ? axi_mem_waddr : axi_mem_laddr;
|
|
end
|
|
axi_mem_waddr_g <= b2g(axi_mem_waddr_s);
|
|
axi_mem_laddr_g <= b2g(axi_mem_laddr_s);
|
|
end
|
|
end
|
|
|
|
// scale the axi_mem_* addresses
|
|
|
|
assign axi_mem_raddr_s = (MEM_RATIO == 1) ? axi_mem_raddr :
|
|
(MEM_RATIO == 2) ? axi_mem_raddr[(DAC_ADDRESS_WIDTH-1):1] :
|
|
(MEM_RATIO == 4) ? axi_mem_raddr[(DAC_ADDRESS_WIDTH-1):2] :
|
|
axi_mem_raddr[(DAC_ADDRESS_WIDTH-1):3];
|
|
assign axi_mem_waddr_s = (MEM_RATIO == 1) ? axi_mem_waddr :
|
|
(MEM_RATIO == 2) ? {axi_mem_waddr, 1'b0} :
|
|
(MEM_RATIO == 4) ? {axi_mem_waddr, 2'b0} :
|
|
{axi_mem_waddr, 3'b0};
|
|
assign axi_mem_laddr_s = (MEM_RATIO == 1) ? axi_mem_laddr :
|
|
(MEM_RATIO == 2) ? {axi_mem_laddr, 1'b0} :
|
|
(MEM_RATIO == 4) ? {axi_mem_laddr, 2'b0} :
|
|
{axi_mem_laddr, 3'b0};
|
|
|
|
// incomming data flow control
|
|
|
|
assign axi_mem_addr_diff_s = {1'b1, axi_mem_waddr} - axi_mem_raddr_s;
|
|
|
|
always @(posedge axi_clk) begin
|
|
if (axi_xfer_req == 1'b0) begin
|
|
axi_mem_addr_diff <= 'd0;
|
|
axi_mem_raddr <= 'd0;
|
|
axi_mem_raddr_m1 <= 'd0;
|
|
axi_mem_raddr_m2 <= 'd0;
|
|
axi_dready <= 'd0;
|
|
end else begin
|
|
axi_mem_raddr_m1 <= dac_mem_raddr_g;
|
|
axi_mem_raddr_m2 <= axi_mem_raddr_m1;
|
|
axi_mem_raddr <= g2b(axi_mem_raddr_m2);
|
|
axi_mem_addr_diff <= axi_mem_addr_diff_s[AXI_ADDRESS_WIDTH-1:0];
|
|
if (axi_mem_addr_diff >= AXI_BUF_THRESHOLD_HI) begin
|
|
axi_dready <= 1'b0;
|
|
end else if (axi_mem_addr_diff <= AXI_BUF_THRESHOLD_LO) begin
|
|
axi_dready <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
// CDC for xfer_req signal
|
|
|
|
always @(posedge dac_clk) begin
|
|
if (dac_rst == 1'b1) begin
|
|
dac_xfer_req_m <= 3'b0;
|
|
end else begin
|
|
dac_xfer_req_m <= {dac_xfer_req_m[1:0], axi_xfer_req};
|
|
end
|
|
end
|
|
|
|
assign dac_xfer_out = dac_xfer_req_m[2];
|
|
assign dac_xfer_init_s = ~dac_xfer_req_m[2] & dac_xfer_req_m[1];
|
|
|
|
// read interface
|
|
|
|
always @(posedge dac_clk) begin
|
|
if (dac_xfer_out == 1'b0) begin
|
|
dac_mem_init <= 1'b0;
|
|
dac_mem_init_d <= 1'b0;
|
|
dac_mem_enable <= 1'b0;
|
|
end else begin
|
|
if (dac_xfer_init == 1'b1) begin
|
|
dac_mem_init <= 1'b1;
|
|
end
|
|
if ((dac_mem_init == 1'b1) && (dac_mem_addr_diff > DAC_BUF_THRESHOLD_LO)) begin
|
|
dac_mem_init <= 1'b0;
|
|
end
|
|
dac_mem_init_d <= dac_mem_init;
|
|
// memory is ready when the initial fill up is done
|
|
dac_mem_enable <= (dac_mem_init_d & ~dac_mem_init) ? 1'b1 : dac_mem_enable;
|
|
end
|
|
dac_xfer_init <= dac_xfer_init_s;
|
|
end
|
|
|
|
always @(posedge dac_clk) begin
|
|
if (dac_xfer_out == 1'b0) begin
|
|
dac_mem_waddr <= 'b0;
|
|
dac_mem_waddr_m1 <= 'b0;
|
|
dac_mem_waddr_m2 <= 'b0;
|
|
dac_mem_laddr <= 'b0;
|
|
dac_mem_laddr_m1 <= 'b0;
|
|
dac_mem_laddr_m2 <= 'b0;
|
|
dac_dlast <= 1'b0;
|
|
dac_dlast_m1 <= 1'b0;
|
|
dac_dlast_m2 <= 1'b0;
|
|
end else begin
|
|
dac_mem_waddr_m1 <= axi_mem_waddr_g;
|
|
dac_mem_waddr_m2 <= dac_mem_waddr_m1;
|
|
dac_mem_waddr <= g2b(dac_mem_waddr_m2);
|
|
dac_mem_laddr_m1 <= axi_mem_laddr_g;
|
|
dac_mem_laddr_m2 <= dac_mem_laddr_m1;
|
|
dac_mem_laddr <= g2b(dac_mem_laddr_m2);
|
|
dac_dlast_m1 <= axi_dlast;
|
|
dac_dlast_m2 <= dac_dlast_m1;
|
|
dac_dlast <= dac_dlast_m2;
|
|
end
|
|
end
|
|
|
|
assign dac_mem_addr_diff_s = {1'b1, dac_mem_waddr} - dac_mem_raddr;
|
|
assign dac_mem_valid_s = (dac_mem_enable) ? dac_valid : 1'b0;
|
|
|
|
// CDC for the dma_last_beats
|
|
|
|
always @(posedge dac_clk) begin
|
|
if (dac_rst == 1'b1) begin
|
|
dac_last_beats <= 32'b0;
|
|
dac_last_beats_m <= 32'b0;
|
|
end else begin
|
|
dac_last_beats_m <= dma_last_beats;
|
|
dac_last_beats <= dac_last_beats_m;
|
|
end
|
|
end
|
|
|
|
// If the MEM_RATIO is grater than one, it can happen that not all the DAC beats from
|
|
// an AXI beat are valid. In this case the invalid data is dropped.
|
|
// The axi_dlast indicates the last AXI beat. The valid number of DAC beats on the last AXI beat
|
|
// commes from the AXI write module. (axi_dacfifo_wr.v)
|
|
|
|
assign dac_last_axi_beats_s = ((dac_dlast_inmem == 1'b1) && (dac_mem_raddr >= dac_mem_laddr) && (dac_mem_raddr < dac_mem_laddr + MEM_RATIO)) ? 1'b1 : 1'b0;
|
|
|
|
always @(posedge dac_clk) begin
|
|
if (dac_xfer_out == 1'b0) begin
|
|
dac_mem_raddr <= 'd0;
|
|
dac_beat_cnt <= 'd0;
|
|
dac_dlast_inmem <= 1'b0;
|
|
end else begin
|
|
if (dac_dlast == 1'b1) begin
|
|
dac_dlast_inmem <= 1'b1;
|
|
end else if (dac_mem_raddr == dac_mem_laddr + MEM_RATIO) begin
|
|
dac_dlast_inmem <= 1'b0;
|
|
end
|
|
if (dac_mem_valid_s == 1'b1) begin
|
|
dac_beat_cnt <= ((dac_beat_cnt >= MEM_RATIO-1) ||
|
|
((dac_last_beats > 1'b1) && (dac_last_axi_beats_s > 1'b0) && (dac_beat_cnt == dac_last_beats-1))) ? 0 : dac_beat_cnt + 1;
|
|
dac_mem_raddr <= ((dac_last_axi_beats_s) && (dac_beat_cnt == dac_last_beats-1)) ? (dac_mem_laddr + MEM_RATIO) : dac_mem_raddr + 1'b1;
|
|
end
|
|
dac_mem_raddr_g <= b2g(dac_mem_raddr);
|
|
end
|
|
end
|
|
|
|
// underflow generation, there is no overflow
|
|
|
|
always @(posedge dac_clk) begin
|
|
if(dac_xfer_out == 1'b0) begin
|
|
dac_mem_addr_diff <= 'b0;
|
|
dac_dunf <= 1'b0;
|
|
end else begin
|
|
dac_mem_addr_diff <= dac_mem_addr_diff_s[DAC_ADDRESS_WIDTH-1:0];
|
|
dac_dunf <= (dac_mem_addr_diff == 1'b0) ? 1'b1 : 1'b0;
|
|
end
|
|
end
|
|
|
|
// instantiations
|
|
|
|
ad_mem_asym #(
|
|
.A_ADDRESS_WIDTH (AXI_ADDRESS_WIDTH),
|
|
.A_DATA_WIDTH (AXI_DATA_WIDTH),
|
|
.B_ADDRESS_WIDTH (DAC_ADDRESS_WIDTH),
|
|
.B_DATA_WIDTH (DAC_DATA_WIDTH))
|
|
i_mem_asym (
|
|
.clka (axi_clk),
|
|
.wea (axi_dvalid),
|
|
.addra (axi_mem_waddr),
|
|
.dina (axi_ddata),
|
|
.clkb (dac_clk),
|
|
.addrb (dac_mem_raddr),
|
|
.doutb (dac_data));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|