127 lines
4.6 KiB
Tcl
127 lines
4.6 KiB
Tcl
###############################################################################
|
|
## Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved.
|
|
### SPDX short identifier: ADIBSD
|
|
###############################################################################
|
|
|
|
create_bd_intf_port -mode Master -vlnv analog.com:interface:spi_master_rtl:1.0 ad40xx_spi
|
|
|
|
|
|
## To support the 1.8MSPS (SCLK == 100 MHz), set the spi clock to 200 MHz
|
|
set_property -dict [list \
|
|
CONFIG.PCW_EN_CLK2_PORT {1} \
|
|
CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ $spi_clk_ref_frequency] [get_bd_cells sys_ps7]
|
|
|
|
# create a SPI Engine architecture
|
|
|
|
create_bd_cell -type hier spi_ad40xx
|
|
current_bd_instance /spi_ad40xx
|
|
|
|
create_bd_pin -dir I -type clk clk
|
|
create_bd_pin -dir I -type rst resetn
|
|
create_bd_pin -dir I -type clk spi_clk
|
|
create_bd_pin -dir O irq
|
|
create_bd_intf_pin -mode Master -vlnv analog.com:interface:spi_master_rtl:1.0 m_spi
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 M_AXIS_SAMPLE
|
|
|
|
if {$ADC_RESOLUTION <= 16} {
|
|
set data_width 16
|
|
} else {
|
|
set data_width 32
|
|
};
|
|
|
|
ad_ip_instance spi_engine_execution execution
|
|
ad_ip_parameter execution CONFIG.DATA_WIDTH $data_width
|
|
ad_ip_parameter execution CONFIG.NUM_OF_CS 1
|
|
ad_ip_parameter execution CONFIG.NUM_OF_SDI 1
|
|
ad_ip_parameter execution CONFIG.SDO_DEFAULT 1
|
|
ad_ip_parameter execution CONFIG.SDI_DELAY 1
|
|
|
|
ad_ip_instance axi_spi_engine axi_regmap
|
|
ad_ip_parameter axi_regmap CONFIG.DATA_WIDTH $data_width
|
|
ad_ip_parameter axi_regmap CONFIG.NUM_OFFLOAD 1
|
|
ad_ip_parameter axi_regmap CONFIG.ASYNC_SPI_CLK 1
|
|
|
|
ad_ip_instance spi_engine_offload offload
|
|
ad_ip_parameter offload CONFIG.DATA_WIDTH $data_width
|
|
ad_ip_parameter offload CONFIG.ASYNC_SPI_CLK 1
|
|
|
|
ad_ip_instance spi_engine_interconnect interconnect
|
|
ad_ip_parameter interconnect CONFIG.DATA_WIDTH $data_width
|
|
|
|
ad_ip_instance util_pulse_gen trigger_gen
|
|
|
|
## to setup the sample rate of the system change the PULSE_PERIOD value
|
|
## the acutal sample rate will be PULSE_PERIOD * (1/sys_cpu_clk)
|
|
set sampling_cycle [expr int(ceil(double($spi_clk_ref_frequency * 1000000) / $ADC_SAMPLING_RATE))]
|
|
ad_ip_parameter trigger_gen CONFIG.PULSE_PERIOD $sampling_cycle
|
|
ad_ip_parameter trigger_gen CONFIG.PULSE_WIDTH 1
|
|
|
|
ad_connect axi_regmap/spi_engine_offload_ctrl0 offload/spi_engine_offload_ctrl
|
|
ad_connect offload/spi_engine_ctrl interconnect/s0_ctrl
|
|
ad_connect axi_regmap/spi_engine_ctrl interconnect/s1_ctrl
|
|
ad_connect interconnect/m_ctrl execution/ctrl
|
|
ad_connect offload/offload_sdi M_AXIS_SAMPLE
|
|
|
|
ad_connect execution/spi m_spi
|
|
|
|
ad_connect spi_clk offload/spi_clk
|
|
ad_connect spi_clk offload/ctrl_clk
|
|
ad_connect spi_clk execution/clk
|
|
ad_connect clk axi_regmap/s_axi_aclk
|
|
ad_connect spi_clk axi_regmap/spi_clk
|
|
ad_connect spi_clk interconnect/clk
|
|
ad_connect spi_clk trigger_gen/clk
|
|
|
|
ad_connect axi_regmap/spi_resetn offload/spi_resetn
|
|
ad_connect axi_regmap/spi_resetn execution/resetn
|
|
ad_connect axi_regmap/spi_resetn interconnect/resetn
|
|
ad_connect axi_regmap/spi_resetn trigger_gen/rstn
|
|
ad_connect trigger_gen/load_config GND
|
|
ad_connect trigger_gen/pulse_width GND
|
|
ad_connect trigger_gen/pulse_period GND
|
|
|
|
ad_connect trigger_gen/pulse offload/trigger
|
|
|
|
ad_connect resetn axi_regmap/s_axi_aresetn
|
|
ad_connect irq axi_regmap/irq
|
|
|
|
current_bd_instance /
|
|
|
|
# asynchronous SPI clock, to support higher SCLK
|
|
ad_connect spi_clk sys_ps7/FCLK_CLK2
|
|
|
|
# dma to receive data stream
|
|
|
|
ad_ip_instance axi_dmac axi_ad40xx_dma
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.DMA_TYPE_SRC 1
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.DMA_TYPE_DEST 0
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.CYCLIC 0
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.SYNC_TRANSFER_START 0
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.AXI_SLICE_SRC 1
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.AXI_SLICE_DEST 1
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.DMA_2D_TRANSFER 0
|
|
|
|
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.DMA_DATA_WIDTH_SRC $data_width
|
|
ad_ip_parameter axi_ad40xx_dma CONFIG.DMA_DATA_WIDTH_DEST 64
|
|
|
|
ad_connect sys_cpu_clk spi_ad40xx/clk
|
|
ad_connect spi_clk axi_ad40xx_dma/s_axis_aclk
|
|
ad_connect sys_cpu_resetn spi_ad40xx/resetn
|
|
ad_connect sys_cpu_resetn axi_ad40xx_dma/m_dest_axi_aresetn
|
|
|
|
ad_connect spi_clk spi_ad40xx/spi_clk
|
|
|
|
ad_connect spi_ad40xx/m_spi ad40xx_spi
|
|
|
|
ad_connect axi_ad40xx_dma/s_axis spi_ad40xx/M_AXIS_SAMPLE
|
|
|
|
ad_cpu_interconnect 0x44a00000 spi_ad40xx/axi_regmap
|
|
ad_cpu_interconnect 0x44a30000 axi_ad40xx_dma
|
|
|
|
ad_cpu_interrupt "ps-13" "mb-13" axi_ad40xx_dma/irq
|
|
ad_cpu_interrupt "ps-12" "mb-12" /spi_ad40xx/irq
|
|
|
|
ad_mem_hp2_interconnect sys_cpu_clk sys_ps7/S_AXI_HP2
|
|
ad_mem_hp2_interconnect sys_cpu_clk axi_ad40xx_dma/m_dest_axi
|