d14376547f
The ADRV9002 uses in the digital interface 1.8V, however the Zed VADJ is selectable by a jumper can go up to 3.3V . Voltage levels higher than 1.8V are detected by the EVAL-ADRV9002 board, asserting the VADJ_ERR pin. If VADJ error is set high keep all drivers in high-z state and signalize it to the software layer through a gpio line. |
||
|---|---|---|
| .. | ||
| common | ||
| zcu102 | ||
| zed | ||
| Makefile | ||