Laszlo Nagy 7f377454a8 daq2/fmcadc4/daq3: Disable the transfer start sync on the ADC DMA ... Explicitly disable the "Transfer Start Synchronisation Support" since the sync lines are not connected in this project. If the sync input line (s_axi_user[0] or fifo_wr_sync) are not connected, Vivado 2017.4.1 no longer connects them to the defaultValue defined in the axi_dmac ip (1). Instead he uses the defaulValue field defined in the interface definition which in case of both interfaces is 0;		2018-04-11 15:09:54 +03:00
..
common	daq2/fmcadc4/daq3: Disable the transfer start sync on the ADC DMA	2018-04-11 15:09:54 +03:00
zc706	Make: Use $(MAKE) for recursive make commands	2018-03-07 07:40:19 +00:00
Makefile	Make: Use $(MAKE) for recursive make commands	2018-03-07 07:40:19 +00:00