pluto_hdl_adi/library/axi_ad9265/axi_ad9265_if.v

154 lines
5.0 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
// This is the LVDS/DDR interface, note that overrange is independent of data path,
// software will not be able to relate overrange to a specific sample!
`timescale 1ns/100ps
module axi_ad9265_if #(
parameter FPGA_TECHNOLOGY = 0,
parameter IO_DELAY_GROUP = "adc_if_delay_group",
parameter DELAY_REFCLK_FREQUENCY = 200
) (
// adc interface (clk, data, over-range)
// nominal clock 125 MHz, up to 300 MHz
input adc_clk_in_p,
input adc_clk_in_n,
input [ 7:0] adc_data_in_p,
input [ 7:0] adc_data_in_n,
input adc_or_in_p,
input adc_or_in_n,
// interface outputs
output adc_clk,
output reg [15:0] adc_data,
output reg adc_or,
output reg adc_status,
// delay control signals
input up_clk,
input [ 8:0] up_dld,
input [44:0] up_dwdata,
output [44:0] up_drdata,
input delay_clk,
input delay_rst,
output delay_locked
);
// internal registers
reg [ 7:0] adc_data_p = 'd0;
reg [ 7:0] adc_data_n = 'd0;
reg adc_or_p = 'd0;
reg adc_or_n = 'd0;
// internal signals
wire [ 7:0] adc_data_p_s;
wire [ 7:0] adc_data_n_s;
wire adc_or_p_s;
wire adc_or_n_s;
genvar l_inst;
always @(posedge adc_clk)
begin
adc_status <= 1'b1;
adc_or <= adc_or_p_s | adc_or_n_s;
adc_data <= { adc_data_p_s[7], adc_data_n_s[7], adc_data_p_s[6], adc_data_n_s[6], adc_data_p_s[5], adc_data_n_s[5], adc_data_p_s[4], adc_data_n_s[4], adc_data_p_s[3], adc_data_n_s[3], adc_data_p_s[2], adc_data_n_s[2], adc_data_p_s[1], adc_data_n_s[1], adc_data_p_s[0], adc_data_n_s[0]};
end
// data interface
generate
for (l_inst = 0; l_inst <= 7; l_inst = l_inst + 1) begin : g_adc_if
ad_data_in #(
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.IODELAY_CTRL (0),
.IODELAY_GROUP (IO_DELAY_GROUP),
.REFCLK_FREQUENCY (DELAY_REFCLK_FREQUENCY)
) i_adc_data (
.rx_clk (adc_clk),
.rx_data_in_p (adc_data_in_p[l_inst]),
.rx_data_in_n (adc_data_in_n[l_inst]),
.rx_data_p (adc_data_p_s[l_inst]),
.rx_data_n (adc_data_n_s[l_inst]),
.up_clk (up_clk),
.up_dld (up_dld[l_inst]),
.up_dwdata (up_dwdata[((l_inst*5)+4):(l_inst*5)]),
.up_drdata (up_drdata[((l_inst*5)+4):(l_inst*5)]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked ());
end
endgenerate
// over-range interface
ad_data_in #(
.FPGA_TECHNOLOGY (FPGA_TECHNOLOGY),
.IODELAY_CTRL (1),
.IODELAY_GROUP (IO_DELAY_GROUP),
.REFCLK_FREQUENCY (DELAY_REFCLK_FREQUENCY)
) i_adc_or (
.rx_clk (adc_clk),
.rx_data_in_p (adc_or_in_p),
.rx_data_in_n (adc_or_in_n),
.rx_data_p (adc_or_p_s),
.rx_data_n (adc_or_n_s),
.up_clk (up_clk),
.up_dld (up_dld[8]),
.up_dwdata (up_dwdata[44:40]),
.up_drdata (up_drdata[44:40]),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked));
// clock
ad_data_clk i_adc_clk (
.rst (1'b0),
.locked (),
.clk_in_p (adc_clk_in_p),
.clk_in_n (adc_clk_in_n),
.clk (adc_clk));
endmodule