229 lines
6.9 KiB
Verilog
229 lines
6.9 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// software programmable clock generator (still needs a reference input!)
|
|
|
|
module axi_clkgen (
|
|
|
|
// clocks
|
|
|
|
clk,
|
|
clk2,
|
|
clk_0,
|
|
clk_1,
|
|
|
|
// axi interface
|
|
|
|
s_axi_aclk,
|
|
s_axi_aresetn,
|
|
s_axi_awvalid,
|
|
s_axi_awaddr,
|
|
s_axi_awready,
|
|
s_axi_wvalid,
|
|
s_axi_wdata,
|
|
s_axi_wstrb,
|
|
s_axi_wready,
|
|
s_axi_bvalid,
|
|
s_axi_bresp,
|
|
s_axi_bready,
|
|
s_axi_arvalid,
|
|
s_axi_araddr,
|
|
s_axi_arready,
|
|
s_axi_rvalid,
|
|
s_axi_rdata,
|
|
s_axi_rresp,
|
|
s_axi_rready);
|
|
|
|
// parameters
|
|
|
|
parameter ID = 0;
|
|
parameter DEVICE_TYPE = 0;
|
|
parameter CLKIN_PERIOD = 5.0;
|
|
parameter CLKIN2_PERIOD = 5.0;
|
|
parameter VCO_DIV = 11;
|
|
parameter VCO_MUL = 49;
|
|
parameter CLK0_DIV = 6;
|
|
parameter CLK0_PHASE = 0.000;
|
|
parameter CLK1_DIV = 6;
|
|
parameter CLK1_PHASE = 0.000;
|
|
|
|
// clocks
|
|
|
|
input clk;
|
|
input clk2;
|
|
output clk_0;
|
|
output clk_1;
|
|
|
|
// axi interface
|
|
|
|
input s_axi_aclk;
|
|
input s_axi_aresetn;
|
|
input s_axi_awvalid;
|
|
input [31:0] s_axi_awaddr;
|
|
output s_axi_awready;
|
|
input s_axi_wvalid;
|
|
input [31:0] s_axi_wdata;
|
|
input [ 3:0] s_axi_wstrb;
|
|
output s_axi_wready;
|
|
output s_axi_bvalid;
|
|
output [ 1:0] s_axi_bresp;
|
|
input s_axi_bready;
|
|
input s_axi_arvalid;
|
|
input [31:0] s_axi_araddr;
|
|
output s_axi_arready;
|
|
output s_axi_rvalid;
|
|
output [31:0] s_axi_rdata;
|
|
output [ 1:0] s_axi_rresp;
|
|
input s_axi_rready;
|
|
|
|
// reset and clocks
|
|
|
|
wire mmcm_rst;
|
|
wire clk_sel;
|
|
wire up_rstn;
|
|
wire up_clk;
|
|
|
|
// internal signals
|
|
|
|
wire up_drp_sel_s;
|
|
wire up_drp_wr_s;
|
|
wire [11:0] up_drp_addr_s;
|
|
wire [15:0] up_drp_wdata_s;
|
|
wire [15:0] up_drp_rdata_s;
|
|
wire up_drp_ready_s;
|
|
wire up_drp_locked_s;
|
|
wire up_wreq_s;
|
|
wire [13:0] up_waddr_s;
|
|
wire [31:0] up_wdata_s;
|
|
wire up_wack_s;
|
|
wire up_rreq_s;
|
|
wire [13:0] up_raddr_s;
|
|
wire [31:0] up_rdata_s;
|
|
wire up_rack_s;
|
|
|
|
// signal name changes
|
|
|
|
assign up_clk = s_axi_aclk;
|
|
assign up_rstn = s_axi_aresetn;
|
|
|
|
// up bus interface
|
|
|
|
up_axi i_up_axi (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_axi_awvalid (s_axi_awvalid),
|
|
.up_axi_awaddr (s_axi_awaddr),
|
|
.up_axi_awready (s_axi_awready),
|
|
.up_axi_wvalid (s_axi_wvalid),
|
|
.up_axi_wdata (s_axi_wdata),
|
|
.up_axi_wstrb (s_axi_wstrb),
|
|
.up_axi_wready (s_axi_wready),
|
|
.up_axi_bvalid (s_axi_bvalid),
|
|
.up_axi_bresp (s_axi_bresp),
|
|
.up_axi_bready (s_axi_bready),
|
|
.up_axi_arvalid (s_axi_arvalid),
|
|
.up_axi_araddr (s_axi_araddr),
|
|
.up_axi_arready (s_axi_arready),
|
|
.up_axi_rvalid (s_axi_rvalid),
|
|
.up_axi_rresp (s_axi_rresp),
|
|
.up_axi_rdata (s_axi_rdata),
|
|
.up_axi_rready (s_axi_rready),
|
|
.up_wreq (up_wreq_s),
|
|
.up_waddr (up_waddr_s),
|
|
.up_wdata (up_wdata_s),
|
|
.up_wack (up_wack_s),
|
|
.up_rreq (up_rreq_s),
|
|
.up_raddr (up_raddr_s),
|
|
.up_rdata (up_rdata_s),
|
|
.up_rack (up_rack_s));
|
|
|
|
// processor interface
|
|
|
|
up_clkgen i_up_clkgen (
|
|
.mmcm_rst (mmcm_rst),
|
|
.clk_sel (clk_sel),
|
|
.up_drp_sel (up_drp_sel_s),
|
|
.up_drp_wr (up_drp_wr_s),
|
|
.up_drp_addr (up_drp_addr_s),
|
|
.up_drp_wdata (up_drp_wdata_s),
|
|
.up_drp_rdata (up_drp_rdata_s),
|
|
.up_drp_ready (up_drp_ready_s),
|
|
.up_drp_locked (up_drp_locked_s),
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_wreq (up_wreq_s),
|
|
.up_waddr (up_waddr_s),
|
|
.up_wdata (up_wdata_s),
|
|
.up_wack (up_wack_s),
|
|
.up_rreq (up_rreq_s),
|
|
.up_raddr (up_raddr_s),
|
|
.up_rdata (up_rdata_s),
|
|
.up_rack (up_rack_s));
|
|
|
|
// mmcm instantiations
|
|
|
|
ad_mmcm_drp #(
|
|
.MMCM_DEVICE_TYPE (DEVICE_TYPE),
|
|
.MMCM_CLKIN_PERIOD (CLKIN_PERIOD),
|
|
.MMCM_CLKIN2_PERIOD (CLKIN2_PERIOD),
|
|
.MMCM_VCO_DIV (VCO_DIV),
|
|
.MMCM_VCO_MUL (VCO_MUL),
|
|
.MMCM_CLK0_DIV (CLK0_DIV),
|
|
.MMCM_CLK0_PHASE (CLK0_PHASE),
|
|
.MMCM_CLK1_DIV (CLK1_DIV),
|
|
.MMCM_CLK1_PHASE (CLK1_PHASE))
|
|
i_mmcm_drp (
|
|
.clk (clk),
|
|
.clk2 (clk2),
|
|
.mmcm_rst (mmcm_rst),
|
|
.clk_sel(clk_sel),
|
|
.mmcm_clk_0 (clk_0),
|
|
.mmcm_clk_1 (clk_1),
|
|
.up_clk (up_clk),
|
|
.up_rstn (up_rstn),
|
|
.up_drp_sel (up_drp_sel_s),
|
|
.up_drp_wr (up_drp_wr_s),
|
|
.up_drp_addr (up_drp_addr_s),
|
|
.up_drp_wdata (up_drp_wdata_s),
|
|
.up_drp_rdata (up_drp_rdata_s),
|
|
.up_drp_ready (up_drp_ready_s),
|
|
.up_drp_locked (up_drp_locked_s));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|