stefan.raus 63ac142874 adrv9001:a10soc:system_qsys.tcl: set clock polarity to 0 ... For fixing "Failed to reset the device and set SPI Config" error, both clockPolarity and clockPhase should be disabled or both enabled. By default both are unset. Signed-off-by: Stefan Raus <stefan.raus@analog.com>		2021-06-16 11:42:50 +03:00
..
a10soc	adrv9001:a10soc:system_qsys.tcl: set clock polarity to 0	2021-06-16 11:42:50 +03:00
common	adrv9001/a10soc: Initial version	2021-05-26 15:44:45 +03:00
zc706	adrv9001/zc706: Fix spaces	2021-03-10 10:35:52 +02:00
zcu102	adrv9001/zcu102: Enable independent Tx from Rx in CMOS mode	2021-05-26 15:44:45 +03:00
zed	adrv9001/zed: Connect TDD sync to PMOD JA1	2021-01-20 13:00:01 +02:00
Makefile	adrv9001:zcu102: Initial version	2020-08-24 17:49:12 +03:00