77 lines
3.2 KiB
Verilog
77 lines
3.2 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2013(c) Analog Devices, Inc.
|
|
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
/*
|
|
* Helper module for synchronizing bit signals from one clock domain to another.
|
|
* It uses the standard approach of 2 FF in series.
|
|
* Note, that while the module allows to synchronize multiple bits at once it is
|
|
* only able to synchronize multi-bit signals where at max one bit changes per
|
|
* clock cycle (e.g. a gray counter).
|
|
*/
|
|
module sync_bits
|
|
(
|
|
input [NUM_BITS-1:0] in,
|
|
input out_resetn,
|
|
input out_clk,
|
|
output [NUM_BITS-1:0] out
|
|
);
|
|
|
|
// Number of bits to synchronize
|
|
parameter NUM_BITS = 1;
|
|
// Whether input and output clocks are asynchronous, if 0 the synchronizer will
|
|
// be bypassed and the output signal equals the input signal.
|
|
parameter CLK_ASYNC = 1;
|
|
|
|
reg [NUM_BITS-1:0] out_m1 = 'h0;
|
|
reg [NUM_BITS-1:0] out_m2 = 'h0;
|
|
|
|
always @(posedge out_clk)
|
|
begin
|
|
if (out_resetn == 1'b0) begin
|
|
out_m1 <= 'b0;
|
|
out_m2 <= 'b0;
|
|
end else begin
|
|
out_m1 <= in;
|
|
out_m2 <= out_m1;
|
|
end
|
|
end
|
|
|
|
assign out = CLK_ASYNC ? out_m2 : in;
|
|
|
|
endmodule
|