pluto_hdl_adi/library/common/ad_serdes_clk.v

162 lines
5.0 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// serial data output interface: serdes(x8) or oddr(x2) output module
`timescale 1ps/1ps
module ad_serdes_clk (
// clock and divided clock
mmcm_rst,
clk_in_p,
clk_in_n,
clk,
div_clk,
// drp interface
drp_clk,
drp_rst,
drp_sel,
drp_wr,
drp_addr,
drp_wdata,
drp_rdata,
drp_ready,
drp_locked);
// parameters
parameter SERDES = 1;
parameter MMCM = 1;
parameter MMCM_DEVICE_TYPE = 0;
parameter MMCM_CLKIN_PERIOD = 1.667;
parameter MMCM_VCO_DIV = 6;
parameter MMCM_VCO_MUL = 12.000;
parameter MMCM_CLK0_DIV = 2.000;
parameter MMCM_CLK1_DIV = 6;
// clock and divided clock
input mmcm_rst;
input clk_in_p;
input clk_in_n;
output clk;
output div_clk;
// drp interface
input drp_clk;
input drp_rst;
input drp_sel;
input drp_wr;
input [11:0] drp_addr;
input [15:0] drp_wdata;
output [15:0] drp_rdata;
output drp_ready;
output drp_locked;
// internal signals
wire clk_in_s;
// instantiations
IBUFGDS i_clk_in_ibuf (
.I (clk_in_p),
.IB (clk_in_n),
.O (clk_in_s));
generate
if (MMCM == 1) begin
ad_mmcm_drp #(
.MMCM_DEVICE_TYPE (MMCM_DEVICE_TYPE),
.MMCM_CLKIN_PERIOD (MMCM_CLKIN_PERIOD),
.MMCM_VCO_DIV (MMCM_VCO_DIV),
.MMCM_VCO_MUL (MMCM_VCO_MUL),
.MMCM_CLK0_DIV (MMCM_CLK0_DIV),
.MMCM_CLK1_DIV (MMCM_CLK1_DIV))
i_mmcm_drp (
.clk (clk_in_s),
.mmcm_rst (mmcm_rst),
.mmcm_clk_0 (clk),
.mmcm_clk_1 (div_clk),
.drp_clk (drp_clk),
.drp_rst (drp_rst),
.drp_sel (drp_sel),
.drp_wr (drp_wr),
.drp_addr (drp_addr),
.drp_wdata (drp_wdata),
.drp_rdata (drp_rdata),
.drp_ready (drp_ready),
.drp_locked (drp_locked));
end
if ((MMCM == 0) && (SERDES == 0)) begin
BUFR #(.BUFR_DIVIDE("BYPASS")) i_clk_buf (
.CLR (1'b0),
.CE (1'b1),
.I (clk_in_s),
.O (clk));
assign div_clk = clk;
end
if ((MMCM == 0) && (SERDES == 1)) begin
BUFIO i_clk_buf (
.I (clk_in_s),
.O (clk));
BUFR #(.BUFR_DIVIDE("4")) i_div_clk_buf (
.CLR (1'b0),
.CE (1'b1),
.I (clk_in_s),
.O (div_clk));
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************