pluto_hdl_adi/library/xilinx/common/ad_serdes_out.v

213 lines
6.6 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// serial data output interface: serdes(x8)
`timescale 1ps/1ps
module ad_serdes_out #(
parameter DEVICE_TYPE = 0,
parameter DDR_OR_SDR_N = 1,
parameter SERDES_FACTOR = 8,
parameter DATA_WIDTH = 16) (
// reset and clocks
input rst,
input clk,
input div_clk,
input loaden,
// data interface
input [(DATA_WIDTH-1):0] data_s0,
input [(DATA_WIDTH-1):0] data_s1,
input [(DATA_WIDTH-1):0] data_s2,
input [(DATA_WIDTH-1):0] data_s3,
input [(DATA_WIDTH-1):0] data_s4,
input [(DATA_WIDTH-1):0] data_s5,
input [(DATA_WIDTH-1):0] data_s6,
input [(DATA_WIDTH-1):0] data_s7,
output [(DATA_WIDTH-1):0] data_out_se,
output [(DATA_WIDTH-1):0] data_out_p,
output [(DATA_WIDTH-1):0] data_out_n);
localparam DEVICE_6SERIES = 1;
localparam DEVICE_7SERIES = 0;
localparam DR_OQ_DDR = DDR_OR_SDR_N == 1'b1 ? "DDR": "SDR";
// internal signals
wire [(DATA_WIDTH-1):0] data_out_s;
wire [(DATA_WIDTH-1):0] serdes_shift1_s;
wire [(DATA_WIDTH-1):0] serdes_shift2_s;
assign data_out_se = data_out_s;
// instantiations
genvar l_inst;
generate
for (l_inst = 0; l_inst <= (DATA_WIDTH-1); l_inst = l_inst + 1) begin: g_data
if (DEVICE_TYPE == DEVICE_7SERIES) begin
OSERDESE2 #(
.DATA_RATE_OQ (DR_OQ_DDR),
.DATA_RATE_TQ ("SDR"),
.DATA_WIDTH (SERDES_FACTOR),
.TRISTATE_WIDTH (1),
.SERDES_MODE ("MASTER"))
i_serdes (
.D1 (data_s0[l_inst]),
.D2 (data_s1[l_inst]),
.D3 (data_s2[l_inst]),
.D4 (data_s3[l_inst]),
.D5 (data_s4[l_inst]),
.D6 (data_s5[l_inst]),
.D7 (data_s6[l_inst]),
.D8 (data_s7[l_inst]),
.T1 (1'b0),
.T2 (1'b0),
.T3 (1'b0),
.T4 (1'b0),
.SHIFTIN1 (1'b0),
.SHIFTIN2 (1'b0),
.SHIFTOUT1 (),
.SHIFTOUT2 (),
.OCE (1'b1),
.CLK (clk),
.CLKDIV (div_clk),
.OQ (data_out_s[l_inst]),
.TQ (),
.OFB (),
.TFB (),
.TBYTEIN (1'b0),
.TBYTEOUT (),
.TCE (1'b0),
.RST (rst));
end
if (DEVICE_TYPE == DEVICE_6SERIES) begin
OSERDESE1 #(
.DATA_RATE_OQ (DR_OQ_DDR),
.DATA_RATE_TQ ("SDR"),
.DATA_WIDTH (SERDES_FACTOR),
.INTERFACE_TYPE ("DEFAULT"),
.TRISTATE_WIDTH (1),
.SERDES_MODE ("MASTER"))
i_serdes_m (
.D1 (data_s0[l_inst]),
.D2 (data_s1[l_inst]),
.D3 (data_s2[l_inst]),
.D4 (data_s3[l_inst]),
.D5 (data_s4[l_inst]),
.D6 (data_s5[l_inst]),
.T1 (1'b0),
.T2 (1'b0),
.T3 (1'b0),
.T4 (1'b0),
.SHIFTIN1 (serdes_shift1_s[l_inst]),
.SHIFTIN2 (serdes_shift2_s[l_inst]),
.SHIFTOUT1 (),
.SHIFTOUT2 (),
.OCE (1'b1),
.CLK (clk),
.CLKDIV (div_clk),
.CLKPERF (1'b0),
.CLKPERFDELAY (1'b0),
.WC (1'b0),
.ODV (1'b0),
.OQ (data_out_s[l_inst]),
.TQ (),
.OCBEXTEND (),
.OFB (),
.TFB (),
.TCE (1'b0),
.RST (rst));
OSERDESE1 #(
.DATA_RATE_OQ (DR_OQ_DDR),
.DATA_RATE_TQ ("SDR"),
.DATA_WIDTH (SERDES_FACTOR),
.INTERFACE_TYPE ("DEFAULT"),
.TRISTATE_WIDTH (1),
.SERDES_MODE ("SLAVE"))
i_serdes_s (
.D1 (1'b0),
.D2 (1'b0),
.D3 (data_s6[l_inst]),
.D4 (data_s7[l_inst]),
.D5 (1'b0),
.D6 (1'b0),
.T1 (1'b0),
.T2 (1'b0),
.T3 (1'b0),
.T4 (1'b0),
.SHIFTIN1 (1'b0),
.SHIFTIN2 (1'b0),
.SHIFTOUT1 (serdes_shift1_s[l_inst]),
.SHIFTOUT2 (serdes_shift2_s[l_inst]),
.OCE (1'b1),
.CLK (clk),
.CLKDIV (div_clk),
.CLKPERF (1'b0),
.CLKPERFDELAY (1'b0),
.WC (1'b0),
.ODV (1'b0),
.OQ (),
.TQ (),
.OCBEXTEND (),
.OFB (),
.TFB (),
.TCE (1'b0),
.RST (rst));
end
OBUFDS i_obuf (
.I (data_out_s[l_inst]),
.O (data_out_p[l_inst]),
.OB (data_out_n[l_inst]));
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************