solvespace/res/locales/fr_FR.po

# French translations for the SolveSpace package.
# Copyright (C) 2018 the SolveSpace authors
# This file is distributed under the same license as the SolveSpace package.
# whitequark <whitequark@whitequark.org>, 2018. #zanata
msgid ""
msgstr ""
"Project-Id-Version: SolveSpace 3.0\n"
"Report-Msgid-Bugs-To: whitequark@whitequark.org\n"
"POT-Creation-Date: 2022-02-01 16:24+0200\n"
"PO-Revision-Date: 2018-07-14 06:12+0000\n"
"Last-Translator: whitequark <whitequark@whitequark.org>\n"
"Language-Team: none\n"
"Language: fr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Zanata 4.4.5\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"

#: clipboard.cpp:309
msgid ""
"Cut, paste, and copy work only in a workplane.\n"
"\n"
"Activate one with Sketch -> In Workplane."
msgstr ""
"Couper, coller et copier uniquement dans un plan de travail.\n"
"\n"
"Activez un plan avec \"Dessin -> Dans plan de travail\"."

#: clipboard.cpp:326
msgid "Clipboard is empty; nothing to paste."
msgstr "Presse papier vide; rien à coller."

#: clipboard.cpp:373
msgid "Number of copies to paste must be at least one."
msgstr "Le nombre de copies à coller doit être d'au moins un."

#: clipboard.cpp:389 textscreens.cpp:833
msgid "Scale cannot be zero."
msgstr "L'échelle ne peut pas être zéro."

#: clipboard.cpp:431
msgid "Select one point to define origin of rotation."
msgstr "Sélectionnez un point pour définir l'origine de la rotation."

#: clipboard.cpp:443
msgid "Select two points to define translation vector."
msgstr "Sélectionnez deux points pour définir le vecteur de translation."

#: clipboard.cpp:453
msgid ""
"Transformation is identity. So all copies will be exactly on top of each "
"other."
msgstr ""
"Transformation identique. Donc, toutes les copies seront exactement les unes "
"au-dessus des autres."

#: clipboard.cpp:457
msgid "Too many items to paste; split this into smaller pastes."
msgstr "Trop d'éléments à coller; Divisez-les en plus petits groupes."

#: clipboard.cpp:462
msgid "No workplane active."
msgstr "Pas d'espace de travail actif."

#: confscreen.cpp:381
msgid "Bad format: specify coordinates as x, y, z"
msgstr "Mauvais format: spécifiez les coordonnées comme x, y, z"

#: confscreen.cpp:391 style.cpp:729 textscreens.cpp:864
msgid "Bad format: specify color as r, g, b"
msgstr "Mauvais format; spécifiez la couleur comme r, v, b"

#: confscreen.cpp:417
msgid ""
"The perspective factor will have no effect until you enable View -> Use "
"Perspective Projection."
msgstr ""
"Le facteur de perspective n'aura aucun effet tant que vous n'aurez pas "
"activé \"Affichage -> Utiliser la projection de perspective\"."

#: confscreen.cpp:435 confscreen.cpp:445
#, c-format
msgid "Specify between 0 and %d digits after the decimal."
msgstr ""

#: confscreen.cpp:457
msgid "Export scale must not be zero!"
msgstr "L'échelle d'export ne doit pas être zéro!"

#: confscreen.cpp:469
msgid "Cutter radius offset must not be negative!"
msgstr "Le décalage du rayon de coupe ne doit pas être négatif!"

#: confscreen.cpp:528
msgid "Bad value: autosave interval should be positive"
msgstr ""
"Mauvaise valeur: l'intervalle d'enregistrement automatique devrait être "
"positif"

#: confscreen.cpp:531
msgid "Bad format: specify interval in integral minutes"
msgstr "Mauvais format: spécifiez un nombre entier de minutes"

#: constraint.cpp:12
msgctxt "constr-name"
msgid "pts-coincident"
msgstr "pts-coïncidence"

#: constraint.cpp:13
msgctxt "constr-name"
msgid "pt-pt-distance"
msgstr "pt-pt-distance"

#: constraint.cpp:14
msgctxt "constr-name"
msgid "pt-line-distance"
msgstr "pt-ligne-distance"

#: constraint.cpp:15
msgctxt "constr-name"
msgid "pt-plane-distance"
msgstr "pt-plan-distance"

#: constraint.cpp:16
msgctxt "constr-name"
msgid "pt-face-distance"
msgstr "pt-face-distance"

#: constraint.cpp:17
msgctxt "constr-name"
msgid "proj-pt-pt-distance"
msgstr "proj-pt-pt-distance"

#: constraint.cpp:18
msgctxt "constr-name"
msgid "pt-in-plane"
msgstr "pt-dans-plan"

#: constraint.cpp:19
msgctxt "constr-name"
msgid "pt-on-line"
msgstr "pt-sur-ligne"

#: constraint.cpp:20
msgctxt "constr-name"
msgid "pt-on-face"
msgstr "pt-sur-face"

#: constraint.cpp:21
msgctxt "constr-name"
msgid "eq-length"
msgstr "eg-longueur"

#: constraint.cpp:22
msgctxt "constr-name"
msgid "eq-length-and-pt-ln-dist"
msgstr "eg-longueur-et-pt-dans-dist"

#: constraint.cpp:23
msgctxt "constr-name"
msgid "eq-pt-line-distances"
msgstr "eg-pt-ligne-distances"

#: constraint.cpp:24
msgctxt "constr-name"
msgid "length-ratio"
msgstr "longueur-ratio"

#: constraint.cpp:25
msgctxt "constr-name"
msgid "arc-arc-length-ratio"
msgstr ""

#: constraint.cpp:26
msgctxt "constr-name"
msgid "arc-line-length-ratio"
msgstr ""

#: constraint.cpp:27
msgctxt "constr-name"
msgid "length-difference"
msgstr "longueur-difference"

#: constraint.cpp:28
msgctxt "constr-name"
msgid "arc-arc-len-difference"
msgstr ""

#: constraint.cpp:29
msgctxt "constr-name"
msgid "arc-line-len-difference"
msgstr ""

#: constraint.cpp:30
msgctxt "constr-name"
msgid "symmetric"
msgstr "symétrique"

#: constraint.cpp:31
msgctxt "constr-name"
msgid "symmetric-h"
msgstr "symétrique-h"

#: constraint.cpp:32
msgctxt "constr-name"
msgid "symmetric-v"
msgstr "symétrique-v"

#: constraint.cpp:33
msgctxt "constr-name"
msgid "symmetric-line"
msgstr "symétrique-ligne"

#: constraint.cpp:34
msgctxt "constr-name"
msgid "at-midpoint"
msgstr "au-point-milieu"

#: constraint.cpp:35
msgctxt "constr-name"
msgid "horizontal"
msgstr "horizontal"

#: constraint.cpp:36
msgctxt "constr-name"
msgid "vertical"
msgstr "vertical"

#: constraint.cpp:37
msgctxt "constr-name"
msgid "diameter"
msgstr "diamètre"

#: constraint.cpp:38
msgctxt "constr-name"
msgid "pt-on-circle"
msgstr "pt-sur-cercle"

#: constraint.cpp:39
msgctxt "constr-name"
msgid "same-orientation"
msgstr "même-orientation"

#: constraint.cpp:40
msgctxt "constr-name"
msgid "angle"
msgstr "angle"

#: constraint.cpp:41
msgctxt "constr-name"
msgid "parallel"
msgstr "parallèle"

#: constraint.cpp:42
msgctxt "constr-name"
msgid "arc-line-tangent"
msgstr "arc-ligne-tangente"

#: constraint.cpp:43
msgctxt "constr-name"
msgid "cubic-line-tangent"
msgstr "cubique-ligne-tangente"

#: constraint.cpp:44
msgctxt "constr-name"
msgid "curve-curve-tangent"
msgstr "courbe-courbe-tangente"

#: constraint.cpp:45
msgctxt "constr-name"
msgid "perpendicular"
msgstr "perpendiculaire"

#: constraint.cpp:46
msgctxt "constr-name"
msgid "eq-radius"
msgstr "eg-rayon"

#: constraint.cpp:47
msgctxt "constr-name"
msgid "eq-angle"
msgstr "eg-angle"

#: constraint.cpp:48
msgctxt "constr-name"
msgid "eq-line-len-arc-len"
msgstr "eg-ligne-long-arc-long"

#: constraint.cpp:49
msgctxt "constr-name"
msgid "lock-where-dragged"
msgstr "verrouillé-où-déplacé"

#: constraint.cpp:50
msgctxt "constr-name"
msgid "comment"
msgstr "commentaire"

#: constraint.cpp:144
msgid ""
"The tangent arc and line segment must share an endpoint. Constrain them with "
"Constrain -> On Point before constraining tangent."
msgstr ""
"L'arc tangent et le segment de ligne doivent partager un point final. "
"Contraignez-les avec \"Contrainte -> Sur point avant de contraindre la "
"tangente\"."

#: constraint.cpp:163
msgid ""
"The tangent cubic and line segment must share an endpoint. Constrain them "
"with Constrain -> On Point before constraining tangent."
msgstr ""
"La tangente cubique et le segment de ligne doivent partager un point final. "
"Contraignez-les avec \"Contrainte -> Sur point avant de contraindre la "
"tangente\"."

#: constraint.cpp:189
msgid ""
"The curves must share an endpoint. Constrain them with Constrain -> On Point "
"before constraining tangent."
msgstr ""
"Les courbes doivent partager un point final. Contraignez-les avec "
"\"Contrainte -> Sur point avant de contraindre la tangente\"."

#: constraint.cpp:238
msgid ""
"Bad selection for distance / diameter constraint. This constraint can apply "
"to:\n"
"\n"
"    * two points (distance between points)\n"
"    * a line segment (length)\n"
"    * two points and a line segment or normal (projected distance)\n"
"    * a workplane and a point (minimum distance)\n"
"    * a line segment and a point (minimum distance)\n"
"    * a plane face and a point (minimum distance)\n"
"    * a circle or an arc (diameter)\n"
msgstr ""
"Mauvaise sélection pour la contrainte distance / diamètre. Cette contrainte "
"peut s'appliquer à:\n"
"\n"
"    * Deux points (distance entre points)\n"
"    * Un segment de ligne (longueur)\n"
"    * Deux points et un segment de ligne ou normal (distance projetée)\n"
"    * Un plan de travail et un point (distance minimale)\n"
"    * Un segment de ligne et un point (distance minimale)\n"
"    * Une face plane et un point (distance minimale)\n"
"    * Un cercle ou un arc (diamètre)\n"

#: constraint.cpp:291
msgid ""
"Bad selection for on point / curve / plane constraint. This constraint can "
"apply to:\n"
"\n"
"    * two points (points coincident)\n"
"    * a point and a workplane (point in plane)\n"
"    * a point and a line segment (point on line)\n"
"    * a point and a circle or arc (point on curve)\n"
"    * a point and a plane face (point on face)\n"
msgstr ""
"Mauvaise sélection pour la contrainte point / courbe / plan. Cette "
"contrainte peut s'appliquer à:\n"
"\n"
"    * Deux points (points coïncidents)\n"
"    * Un point et un plan de travail (point dans le plan)\n"
"    * Un point et un segment de ligne (point en ligne)\n"
"    * Un point et un cercle ou un arc (point sur courbe)\n"
"    * Un point et une face plane (point sur une face)\n"

#: constraint.cpp:353
msgid ""
"Bad selection for equal length / radius constraint. This constraint can "
"apply to:\n"
"\n"
"    * two line segments (equal length)\n"
"    * two line segments and two points (equal point-line distances)\n"
"    * a line segment and two points (equal point-line distances)\n"
"    * a line segment, and a point and line segment (point-line distance "
"equals length)\n"
"    * four line segments or normals (equal angle between A,B and C,D)\n"
"    * three line segments or normals (equal angle between A,B and B,C)\n"
"    * two circles or arcs (equal radius)\n"
"    * a line segment and an arc (line segment length equals arc length)\n"
msgstr ""
"Mauvaise sélection pour une contrainte de longueur / rayon égale. Cette "
"contrainte peut s'appliquer à:\n"
"\n"
"    * Deux segments de ligne (longueur égale)\n"
"    * Deux segments de ligne et deux points (distances point-ligne égales)\n"
"    * Un segment de ligne et deux points (distances point-ligne égales)\n"
"    * Un segment de ligne ou un segment de ligne et point (distance point-"
"ligne de longueur égale)\n"
"    * Quatre segments de ligne ou des normales (angle entre A, B et C, D "
"égaux)\n"
"    * Trois segments de ligne ou des normales (angle entre A, B et B, C "
"égaux)\n"
"    * Deux cercles ou arcs (rayon égaux)\n"
"    * Un segment de ligne et un arc (la longueur de segment de ligne est "
"égale à la longueur d'arc)\n"

#: constraint.cpp:407
msgid ""
"Bad selection for length ratio constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * two arcs\n"
"    * one arc and one line segment\n"
msgstr ""

#: constraint.cpp:441
msgid ""
"Bad selection for length difference constraint. This constraint can apply "
"to:\n"
"\n"
"    * two line segments\n"
"    * two arcs\n"
"    * one arc and one line segment\n"
msgstr ""

#: constraint.cpp:472
msgid ""
"Bad selection for at midpoint constraint. This constraint can apply to:\n"
"\n"
"    * a line segment and a point (point at midpoint)\n"
"    * a line segment and a workplane (line's midpoint on plane)\n"
msgstr ""
"Mauvaise sélection pour une contrainte de point médian. Cette contrainte "
"peut s'appliquer à:\n"
"\n"
"    * Un segment de ligne et un point (point au milieu)\n"
"    * Un segment de ligne et un plan de travail (point médian dans le plan)\n"

#: constraint.cpp:530
msgid ""
"Bad selection for symmetric constraint. This constraint can apply to:\n"
"\n"
"    * two points or a line segment (symmetric about workplane's coordinate "
"axis)\n"
"    * line segment, and two points or a line segment (symmetric about line "
"segment)\n"
"    * workplane, and two points or a line segment (symmetric about "
"workplane)\n"
msgstr ""
"Mauvaise sélection pour la contrainte symétrique. Cette contrainte peut "
"s'appliquer à:\n"
"\n"
"    * Deux points ou un segment de ligne (symétrique à l'axe des coordonnées "
"du plan de travail)\n"
"    * Segment de ligne, et deux points ou un segment de ligne (symétrique "
"sur le segment de ligne)\n"
"    * Plan de travail, et deux points ou un segment de ligne (symétrique au "
"plan de travail)\n"

#: constraint.cpp:545
msgid ""
"A workplane must be active when constraining symmetric without an explicit "
"symmetry plane."
msgstr ""
"Un plan de travail doit être actif lors d'une contrainte de symétrie sans "
"plan de symétrie explicite."

#: constraint.cpp:579
msgid ""
"Activate a workplane (with Sketch -> In Workplane) before applying a "
"horizontal or vertical constraint."
msgstr ""
"Activez un plan de travail (avec Dessin -> Dans plan de travail) avant "
"d'appliquer une contrainte horizontale ou verticale."

#: constraint.cpp:592
msgid ""
"Bad selection for horizontal / vertical constraint. This constraint can "
"apply to:\n"
"\n"
"    * two points\n"
"    * a line segment\n"
msgstr ""
"Mauvaise sélection pour la contrainte horizontale / verticale. Cette "
"contrainte peut s'appliquer à:\n"
"\n"
"    * deux points\n"
"    * Un segment de ligne\n"

#: constraint.cpp:613
msgid ""
"Bad selection for same orientation constraint. This constraint can apply "
"to:\n"
"\n"
"    * two normals\n"
msgstr ""
"Mauvaise sélection pour la même contrainte d'orientation. Cette contrainte "
"peut s'appliquer à:\n"
"\n"
"    * Deux normales\n"

#: constraint.cpp:663
msgid "Must select an angle constraint."
msgstr "Vous devez sélectionner une contrainte d'angle."

#: constraint.cpp:676
msgid "Must select a constraint with associated label."
msgstr "Vous devez sélectionner une contrainte avec une étiquette associée."

#: constraint.cpp:687
msgid ""
"Bad selection for angle constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * a line segment and a normal\n"
"    * two normals\n"
msgstr ""
"Mauvaise sélection pour une contrainte d'angle. Cette contrainte peut "
"s'appliquer à:\n"
"\n"
"    * Deux segments de ligne\n"
"    * Un segment de ligne et une normale\n"
"    * Deux normales\n"

#: constraint.cpp:754
msgid "Curve-curve tangency must apply in workplane."
msgstr "Courbe-Courbe tangence doit s'appliquer dans le plan de travail."

#: constraint.cpp:766
msgid ""
"Bad selection for parallel / tangent constraint. This constraint can apply "
"to:\n"
"\n"
"    * two line segments (parallel)\n"
"    * a line segment and a normal (parallel)\n"
"    * two normals (parallel)\n"
"    * two line segments, arcs, or beziers, that share an endpoint (tangent)\n"
msgstr ""
"Mauvaise sélection pour la contrainte parallèle / tangente. Cette contrainte "
"peut s'appliquer à:\n"
"\n"
"    * Deux segments de ligne (parallèles)\n"
"    * Un segment de ligne et un parallèle (parallèle)\n"
"    * Deux normales (parallèles)\n"
"    * Deux segments de ligne, des arcs ou des Béziers, qui partagent un "
"point final (tangent)\n"

#: constraint.cpp:784
msgid ""
"Bad selection for perpendicular constraint. This constraint can apply to:\n"
"\n"
"    * two line segments\n"
"    * a line segment and a normal\n"
"    * two normals\n"
msgstr ""
"Mauvaise sélection pour une contrainte perpendiculaire. Cette contrainte "
"peut s'appliquer à:\n"
"\n"
"    * Deux segments de ligne\n"
"    * Un segment de ligne et une normale\n"
"    * Deux normales\n"

#: constraint.cpp:799
msgid ""
"Bad selection for lock point where dragged constraint. This constraint can "
"apply to:\n"
"\n"
"    * a point\n"
msgstr ""
"Mauvaise sélection pour le point de verrouillage où la contrainte déplacé. "
"Cette contrainte peut s'appliquer à:\n"
"\n"
"    * un point\n"

#: constraint.cpp:813 mouse.cpp:1158
msgid "NEW COMMENT -- DOUBLE-CLICK TO EDIT"
msgstr "NOUVEAU COMMENTAIRE - DOUBLE-CLIQUE POUR EDITER"

#: constraint.cpp:818
msgid "click center of comment text"
msgstr "cliquez le centre du texte de commentaire"

#: export.cpp:19
msgid ""
"No solid model present; draw one with extrudes and revolves, or use Export "
"2d View to export bare lines and curves."
msgstr ""
"Aucun modèle solide présent; Dessinez-en un avec une extrusion et "
"révolution, ou utilisez \"Exporter vue  2d\" pour exporter les lignes et les "
"courbes dépouillées."

#: export.cpp:61
msgid ""
"Bad selection for export section. Please select:\n"
"\n"
"    * nothing, with an active workplane (workplane is section plane)\n"
"    * a face (section plane through face)\n"
"    * a point and two line segments (plane through point and parallel to "
"lines)\n"
msgstr ""
"Mauvaise sélection pour la section export. Sélectionnez:\n"
"\n"
"    * Rien, avec un plan de travail actif (plan de travail est un plan de "
"section)\n"
"    * Une face (plan de coupe au-travers d'une face)\n"
"    * Un point et deux segments de ligne (plan au-travers d'un point et "
"parallèle aux lignes)\n"

#: export.cpp:818
msgid "Active group mesh is empty; nothing to export."
msgstr "Le maillage du groupe actif est vide; Rien à exporter."

#: exportvector.cpp:336
msgid "freehand lines were replaced with continuous lines"
msgstr "les lignes à main levée ont été remplacées par des lignes continues"

#: exportvector.cpp:338
msgid "zigzag lines were replaced with continuous lines"
msgstr "les lignes en zigzag ont été remplacées par des lignes continues"

#: exportvector.cpp:592
msgid ""
"Some aspects of the drawing have no DXF equivalent and were not exported:\n"
msgstr ""
"Certains aspects du dessin n'ont pas d'équivalent DXF et n'ont pas été "
"exportés:\n"

#: exportvector.cpp:838
msgid ""
"PDF page size exceeds 200 by 200 inches; many viewers may reject this file."
msgstr ""
"La taille de la page PDF dépasse 200 par 200 pouces; De nombreux lecteurs "
"peuvent rejeter ce fichier."

#: file.cpp:44 group.cpp:91
msgctxt "group-name"
msgid "sketch-in-plane"
msgstr "dessin-dans-plan"

#: file.cpp:62
msgctxt "group-name"
msgid "#references"
msgstr "#références"

#: file.cpp:550
msgid "The file is empty. It may be corrupt."
msgstr ""

#: file.cpp:555
msgid ""
"Unrecognized data in file. This file may be corrupt, or from a newer version "
"of the program."
msgstr ""
"Données non reconnues dans le fichier. Ce fichier peut être corrompu ou "
"depuis une version plus récente du programme."

#: file.cpp:867
msgctxt "title"
msgid "Missing File"
msgstr "Fichier manquant"

#: file.cpp:868
#, c-format
msgctxt "dialog"
msgid "The linked file “%s” is not present."
msgstr ""

#: file.cpp:870
msgctxt "dialog"
msgid ""
"Do you want to locate it manually?\n"
"\n"
"If you decline, any geometry that depends on the missing file will be "
"permanently removed."
msgstr ""

#: file.cpp:873
msgctxt "button"
msgid "&Yes"
msgstr ""

#: file.cpp:875
msgctxt "button"
msgid "&No"
msgstr ""

#: file.cpp:877 solvespace.cpp:611
msgctxt "button"
msgid "&Cancel"
msgstr ""

#: graphicswin.cpp:41
msgid "&File"
msgstr "&Fichier"

#: graphicswin.cpp:42
msgid "&New"
msgstr "&Nouveau"

#: graphicswin.cpp:43
msgid "&Open..."
msgstr "&Ouvrir..."

#: graphicswin.cpp:44
msgid "Open &Recent"
msgstr "Ouvrir &Récent"

#: graphicswin.cpp:45
msgid "&Save"
msgstr "&Sauver"

#: graphicswin.cpp:46
msgid "Save &As..."
msgstr "Sauver &Comme..."

#: graphicswin.cpp:48
msgid "Export &Image..."
msgstr "Exporter &Image..."

#: graphicswin.cpp:49
msgid "Export 2d &View..."
msgstr "Exporter &vue 2D..."

#: graphicswin.cpp:50
msgid "Export 2d &Section..."
msgstr "Exporter &Section 2d..."

#: graphicswin.cpp:51
msgid "Export 3d &Wireframe..."
msgstr "Exporter &Fil de fer 3d..."

#: graphicswin.cpp:52
msgid "Export Triangle &Mesh..."
msgstr "Exporter Triangle &Maillage..."

#: graphicswin.cpp:53
msgid "Export &Surfaces..."
msgstr "Export &Surfaces..."

#: graphicswin.cpp:54
msgid "Im&port..."
msgstr "Im&porter..."

#: graphicswin.cpp:57
msgid "E&xit"
msgstr "&Quitter"

#: graphicswin.cpp:60
msgid "&Edit"
msgstr "&Editer"

#: graphicswin.cpp:61
msgid "&Undo"
msgstr "&Annuler"

#: graphicswin.cpp:62
msgid "&Redo"
msgstr "&Refaire"

#: graphicswin.cpp:63
msgid "Re&generate All"
msgstr "Re&générer Tout"

#: graphicswin.cpp:65
msgid "Snap Selection to &Grid"
msgstr "Accrocher la sélection à la &Grille"

#: graphicswin.cpp:66
msgid "Rotate Imported &90°"
msgstr "Rotation importation &90°"

#: graphicswin.cpp:68
msgid "Cu&t"
msgstr "Co&uper"

#: graphicswin.cpp:69
msgid "&Copy"
msgstr "&Copier"

#: graphicswin.cpp:70
msgid "&Paste"
msgstr "Co&ller"

#: graphicswin.cpp:71
msgid "Paste &Transformed..."
msgstr "Coller &Transformer..."

#: graphicswin.cpp:72
msgid "&Delete"
msgstr "&Effacer"

#: graphicswin.cpp:74
msgid "Select &Edge Chain"
msgstr "Sélectionner une Chaîne d'&Arêtes"

#: graphicswin.cpp:75
msgid "Select &All"
msgstr "Sélectionner &Tout"

#: graphicswin.cpp:76
msgid "&Unselect All"
msgstr "&Désélectionner Tout"

#: graphicswin.cpp:78
msgid "&Line Styles..."
msgstr "&Ligne styles..."

#: graphicswin.cpp:79
msgid "&View Projection..."
msgstr "&Affichage Perspective..."

#: graphicswin.cpp:81
msgid "Con&figuration..."
msgstr "Con&figuration..."

#: graphicswin.cpp:84
msgid "&View"
msgstr "&Affichage"

#: graphicswin.cpp:85
msgid "Zoom &In"
msgstr "Zoom &Avant"

#: graphicswin.cpp:86
msgid "Zoom &Out"
msgstr "Zoom A&rrière"

#: graphicswin.cpp:87
msgid "Zoom To &Fit"
msgstr "Zoom A&justé"

#: graphicswin.cpp:89
msgid "Align View to &Workplane"
msgstr "Aligner la vue au &Plan de travail"

#: graphicswin.cpp:90
msgid "Nearest &Ortho View"
msgstr "Vue &Orthogonale la plus proche"

#: graphicswin.cpp:91
msgid "Nearest &Isometric View"
msgstr "Vue &Isométrique la plus proche"

#: graphicswin.cpp:92
msgid "&Center View At Point"
msgstr "&Centrer la Vue sur le Point"

#: graphicswin.cpp:94
msgid "Show Snap &Grid"
msgstr "Afficher la &grille d'accrochage"

#: graphicswin.cpp:95
msgid "Darken Inactive Solids"
msgstr ""

#: graphicswin.cpp:96
msgid "Use &Perspective Projection"
msgstr "Utiliser la vue en &Perspective"

#: graphicswin.cpp:97
msgid "Show E&xploded View"
msgstr ""

#: graphicswin.cpp:98
msgid "Dimension &Units"
msgstr "&Unités de dimensions"

#: graphicswin.cpp:99
msgid "Dimensions in &Millimeters"
msgstr "Dimensions en &Millimètres"

#: graphicswin.cpp:100
msgid "Dimensions in M&eters"
msgstr "Dimensions en &Mètres"

#: graphicswin.cpp:101
msgid "Dimensions in &Inches"
msgstr "Dimensions en &Pouces"

#: graphicswin.cpp:102
msgid "Dimensions in &Feet and Inches"
msgstr ""

#: graphicswin.cpp:104
msgid "Show &Toolbar"
msgstr "Affichage &Barre d'outils"

#: graphicswin.cpp:105
msgid "Show Property Bro&wser"
msgstr "Affichage du &Navigateur de Propriété"

#: graphicswin.cpp:107
msgid "&Full Screen"
msgstr "&Plein Ecran"

#: graphicswin.cpp:109
msgid "&New Group"
msgstr "&Nouveau Groupe"

#: graphicswin.cpp:110
msgid "Sketch In &3d"
msgstr "Dessin en &3d"

#: graphicswin.cpp:111
msgid "Sketch In New &Workplane"
msgstr "Dessin dans un nouveau &Plan de travail"

#: graphicswin.cpp:113
msgid "Step &Translating"
msgstr "Répétiter par &Translation"

#: graphicswin.cpp:114
msgid "Step &Rotating"
msgstr "Répétiter par &Rotation"

#: graphicswin.cpp:116
msgid "E&xtrude"
msgstr "E&xtruder"

#: graphicswin.cpp:117
msgid "&Helix"
msgstr "&Helix"

#: graphicswin.cpp:118
msgid "&Lathe"
msgstr "&Lathe"

#: graphicswin.cpp:119
msgid "Re&volve"
msgstr "Ré&volution"

#: graphicswin.cpp:121
msgid "Link / Assemble..."
msgstr "Lié / Assembler..."

#: graphicswin.cpp:122
msgid "Link Recent"
msgstr "Lié Récent"

#: graphicswin.cpp:124
msgid "&Sketch"
msgstr "&Dessin"

#: graphicswin.cpp:125
msgid "In &Workplane"
msgstr "Dans le &Plan de travail"

#: graphicswin.cpp:126
msgid "Anywhere In &3d"
msgstr "N'importe où dans la &3d"

#: graphicswin.cpp:128
msgid "Datum &Point"
msgstr "&Point"

#: graphicswin.cpp:129
msgid "&Workplane"
msgstr "&Plan de travail"

#: graphicswin.cpp:131
msgid "Line &Segment"
msgstr "Ligne - &Polyligne"

#: graphicswin.cpp:132
msgid "C&onstruction Line Segment"
msgstr "Ligne de C&onstruction"

#: graphicswin.cpp:133
msgid "&Rectangle"
msgstr "&Rectangle"

#: graphicswin.cpp:134
msgid "&Circle"
msgstr "&Cercle"

#: graphicswin.cpp:135
msgid "&Arc of a Circle"
msgstr "&Arc de Cercle"

#: graphicswin.cpp:136
msgid "&Bezier Cubic Spline"
msgstr "Spline Cubique de &Beziers"

#: graphicswin.cpp:138
msgid "&Text in TrueType Font"
msgstr "&Texte en Police TrueType"

#: graphicswin.cpp:139
msgid "&Image"
msgstr "&Image"

#: graphicswin.cpp:141
msgid "To&ggle Construction"
msgstr "&Basculer en mode \"Construction\""

#: graphicswin.cpp:142
msgid "Tangent &Arc at Point"
msgstr "&Arc Tangent au Point"

#: graphicswin.cpp:143
msgid "Split Curves at &Intersection"
msgstr "Diviser les Courbes à l'&Intersection"

#: graphicswin.cpp:145
msgid "&Constrain"
msgstr "&Constraintes"

#: graphicswin.cpp:146
msgid "&Distance / Diameter"
msgstr "&Distance / Diamètre"

#: graphicswin.cpp:147
msgid "Re&ference Dimension"
msgstr "Dimension Maîtresse / Indicative"

#: graphicswin.cpp:148
msgid "A&ngle"
msgstr "A&ngle"

#: graphicswin.cpp:149
msgid "Reference An&gle"
msgstr "An&gle Maître / Indicatif"

#: graphicswin.cpp:150
msgid "Other S&upplementary Angle"
msgstr "Autre angle S&upplémentaire"

#: graphicswin.cpp:151
msgid "Toggle R&eference Dim"
msgstr "Basculer cote Maîtresse / cote Indicative"

#: graphicswin.cpp:153
msgid "&Horizontal"
msgstr "&Horizontal"

#: graphicswin.cpp:154
msgid "&Vertical"
msgstr "&Vertical"

#: graphicswin.cpp:156
msgid "&On Point / Curve / Plane"
msgstr "&Sur Point / Courbe / Plan"

#: graphicswin.cpp:157
msgid "E&qual Length / Radius / Angle"
msgstr "&Egale Longueur / Rayon / Angle"

#: graphicswin.cpp:158
msgid "Length / Arc Ra&tio"
msgstr ""

#: graphicswin.cpp:159
msgid "Length / Arc Diff&erence"
msgstr ""

#: graphicswin.cpp:160
msgid "At &Midpoint"
msgstr "Au &Milieu"

#: graphicswin.cpp:161
msgid "S&ymmetric"
msgstr "&Symétrique"

#: graphicswin.cpp:162
msgid "Para&llel / Tangent"
msgstr "Para&llèle / Tangent"

#: graphicswin.cpp:163
msgid "&Perpendicular"
msgstr "&Perpendiculaire"

#: graphicswin.cpp:164
msgid "Same Orient&ation"
msgstr "Même Orient&ation"

#: graphicswin.cpp:165
msgid "Lock Point Where &Dragged"
msgstr "Accrocher le point à l'&Emplacement"

#: graphicswin.cpp:167
msgid "Comment"
msgstr "Commentaire"

#: graphicswin.cpp:169
msgid "&Analyze"
msgstr "&Analyse"

#: graphicswin.cpp:170
msgid "Measure &Volume"
msgstr "Mesure &Volume"

#: graphicswin.cpp:171
msgid "Measure A&rea"
msgstr "Mesure &Aire"

#: graphicswin.cpp:172
msgid "Measure &Perimeter"
msgstr "Mesure &Périmètre"

#: graphicswin.cpp:173
msgid "Show &Interfering Parts"
msgstr "Montrer les Pièces &Interférentes"

#: graphicswin.cpp:174
msgid "Show &Naked Edges"
msgstr "Montrer les Arêtes &Nues"

#: graphicswin.cpp:175
msgid "Show &Center of Mass"
msgstr "Montrer le &Centre de Gravité"

#: graphicswin.cpp:177
msgid "Show &Underconstrained Points"
msgstr "Montrer les &sous-contraintes Points"

#: graphicswin.cpp:179
msgid "&Trace Point"
msgstr "&Tracer Point"

#: graphicswin.cpp:180
msgid "&Stop Tracing..."
msgstr "&Arrêt Tracé..."

#: graphicswin.cpp:181
msgid "Step &Dimension..."
msgstr "&Dimension pas-à-pas..."

#: graphicswin.cpp:183
msgid "&Help"
msgstr "&Aide"

#: graphicswin.cpp:184
msgid "&Language"
msgstr "&Langue"

#: graphicswin.cpp:185
msgid "&Website / Manual"
msgstr "&Site web / Manuel"

#: graphicswin.cpp:186
msgid "&Go to GitHub commit"
msgstr ""

#: graphicswin.cpp:188
msgid "&About"
msgstr "&A propos"

#: graphicswin.cpp:362
msgid "(no recent files)"
msgstr "(pas de fichier récent)"

#: graphicswin.cpp:370
#, c-format
msgid "File '%s' does not exist."
msgstr ""

#: graphicswin.cpp:737
msgid "No workplane is active, so the grid will not appear."
msgstr "Pas de plan de travail actif, donc la grille ne va pas apparaître."

#: graphicswin.cpp:752
msgid ""
"The perspective factor is set to zero, so the view will always be a parallel "
"projection.\n"
"\n"
"For a perspective projection, modify the perspective factor in the "
"configuration screen. A value around 0.3 is typical."
msgstr ""
"Le facteur de perspective est réglé à 0, donc la vue restera une projection "
"parallèle.\n"
"\n"
"Pour une projection en perspective, modifiez le facteur de perspective dans "
"l'écran de configuration. Une valeur d'environ 0,3 est typique."

#: graphicswin.cpp:837
msgid ""
"Select a point; this point will become the center of the view on screen."
msgstr ""
"Sélectionnez un point. Ce point deviendra le centre de la vue à l'écran."

#: graphicswin.cpp:1137
msgid "No additional entities share endpoints with the selected entities."
msgstr ""
"Aucune entité supplémentaire ne partage des points d'extrémité avec les "
"entités sélectionnées."

#: graphicswin.cpp:1155
msgid ""
"To use this command, select a point or other entity from an linked part, or "
"make a link group the active group."
msgstr ""
"Pour utiliser cette commande, sélectionnez un point ou une autre entité à "
"partir d'une pièce liée ou créez un groupe de liens dans le groupe actif."

#: graphicswin.cpp:1178
msgid ""
"No workplane is active. Activate a workplane (with Sketch -> In Workplane) "
"to define the plane for the snap grid."
msgstr ""
"Aucun plan de travail n'est actif. Activez un plan de travail (avec Dessin -"
"> Dans plan de travail) pour définir le plan pour la grille d'accrochage."

#: graphicswin.cpp:1185
msgid ""
"Can't snap these items to grid; select points, text comments, or constraints "
"with a label. To snap a line, select its endpoints."
msgstr ""
"Impossible d'accrocher ces éléments à la grille. Sélectionnez des points, "
"des textes de commentaires ou des contraintes avec une étiquette. Pour "
"accrocher une ligne, sélectionnez ses points d'extrémité."

#: graphicswin.cpp:1270
msgid "No workplane selected. Activating default workplane for this group."
msgstr ""
"Aucun plan de travail sélectionné. Activation du plan de travail par défaut "
"pour ce groupe."

#: graphicswin.cpp:1273
msgid ""
"No workplane is selected, and the active group does not have a default "
"workplane. Try selecting a workplane, or activating a sketch-in-new-"
"workplane group."
msgstr ""
"Aucun plan de travail n'est sélectionné et le groupe actif n'a pas de plan "
"de travail par défaut. Essayez de sélectionner un plan de travail ou "
"d'activer un groupe de \"Dessin dans nouveau plan travail\"."

#: graphicswin.cpp:1294
msgid ""
"Bad selection for tangent arc at point. Select a single point, or select "
"nothing to set up arc parameters."
msgstr ""
"Mauvaise sélection pour l'arc tangent au point. Sélectionnez un seul point, "
"ou ne sélectionnez rien pour configurer les paramètres de l'arc."

#: graphicswin.cpp:1305
msgid "click point on arc (draws anti-clockwise)"
msgstr ""
"cliquez un point sur l'arc (dessine dans le sens inverse des aiguilles d'une "
"montre)"

#: graphicswin.cpp:1306
msgid "click to place datum point"
msgstr "cliquez pour placer un point"

#: graphicswin.cpp:1307
msgid "click first point of line segment"
msgstr "cliquez le premier point du segment de ligne"

#: graphicswin.cpp:1309
msgid "click first point of construction line segment"
msgstr "cliquez le premier point de la ligne de construction"

#: graphicswin.cpp:1310
msgid "click first point of cubic segment"
msgstr "cliquez le premier point du segment cubique"

#: graphicswin.cpp:1311
msgid "click center of circle"
msgstr "cliquez pour placer le centre du cercle"

#: graphicswin.cpp:1312
msgid "click origin of workplane"
msgstr "cliquez pour placer l'origine du plan de travail"

#: graphicswin.cpp:1313
msgid "click one corner of rectangle"
msgstr "cliquez un coin du rectangle"

#: graphicswin.cpp:1314
msgid "click top left of text"
msgstr "cliquez le haut à gauche du texte"

#: graphicswin.cpp:1320
msgid "click top left of image"
msgstr "cliquez le haut à gauche de l'image"

#: graphicswin.cpp:1346
msgid ""
"No entities are selected. Select entities before trying to toggle their "
"construction state."
msgstr ""
"Aucune entité n'est sélectionnée. Sélectionnez les entités avant d'essayer "
"de basculer leurs états de construction."

#: group.cpp:86
msgctxt "group-name"
msgid "sketch-in-3d"
msgstr "dessin-en-3d"

#: group.cpp:150
msgid ""
"Bad selection for new sketch in workplane. This group can be created with:\n"
"\n"
"    * a point (through the point, orthogonal to coordinate axes)\n"
"    * a point and two line segments (through the point, parallel to the "
"lines)\n"
"    * a point and a normal (through the point, orthogonal to the normal)\n"
"    * a workplane (copy of the workplane)\n"
msgstr ""

#: group.cpp:166
msgid ""
"Activate a workplane (Sketch -> In Workplane) before extruding. The sketch "
"will be extruded normal to the workplane."
msgstr ""
"Activez un plan de travail (Dessin -> Dans plan de travail) avant "
"l'extrusion. Le croquis sera extrudé normalement au plan de travail."

#: group.cpp:175
msgctxt "group-name"
msgid "extrude"
msgstr "extruder"

#: group.cpp:180
msgid "Lathe operation can only be applied to planar sketches."
msgstr ""

#: group.cpp:191
msgid ""
"Bad selection for new lathe group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""
"Mauvaise sélection pour un nouveau groupe de révolution. Ce groupe peut être "
"créé avec:\n"
"\n"
"    * Un point et un segment de ligne ou normal (révolution autour d'un axe "
"parallèle à la ligne / point normal, par le point)\n"
"    * Un segment de ligne (révolution sur le segment de ligne)\n"

#: group.cpp:201
msgctxt "group-name"
msgid "lathe"
msgstr "révolution"

#: group.cpp:206
msgid "Revolve operation can only be applied to planar sketches."
msgstr ""

#: group.cpp:217
msgid ""
"Bad selection for new revolve group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""

#: group.cpp:229
msgctxt "group-name"
msgid "revolve"
msgstr ""

#: group.cpp:234
msgid "Helix operation can only be applied to planar sketches."
msgstr ""

#: group.cpp:245
msgid ""
"Bad selection for new helix group. This group can be created with:\n"
"\n"
"    * a point and a line segment or normal (revolved about an axis parallel "
"to line / normal, through point)\n"
"    * a line segment (revolved about line segment)\n"
msgstr ""

#: group.cpp:257
msgctxt "group-name"
msgid "helix"
msgstr ""

#: group.cpp:270
msgid ""
"Bad selection for new rotation. This group can be created with:\n"
"\n"
"    * a point, while locked in workplane (rotate in plane, about that "
"point)\n"
"    * a point and a line or a normal (rotate about an axis through the "
"point, and parallel to line / normal)\n"
msgstr ""
"Mauvaise sélection pour une nouvelle rotation. Ce groupe peut être créé "
"avec:\n"
"\n"
"    * Un point, lorsqu'il est verrouillé dans un plan de travail (rotation "
"dans le plan, autour de ce point)\n"
"    * Un point et une ligne ou une normale (tourner autour d'un axe par le "
"point et parallèle à la ligne / normale)\n"

#: group.cpp:283
msgctxt "group-name"
msgid "rotate"
msgstr "rotation"

#: group.cpp:294
msgctxt "group-name"
msgid "translate"
msgstr "translation"

#: group.cpp:416
msgid "(unnamed)"
msgstr "(sans nom)"

#: groupmesh.cpp:707
msgid "not closed contour, or not all same style!"
msgstr "contour non fermé ou tout n'est pas du même style!"

#: groupmesh.cpp:720
msgid "points not all coplanar!"
msgstr "les points ne sont pas tous coplanaires!"

#: groupmesh.cpp:722
msgid "contour is self-intersecting!"
msgstr "le contour s'entrecroise!"

#: groupmesh.cpp:724
msgid "zero-length edge!"
msgstr "arête de longueur nulle!"

#: importmesh.cpp:136
msgid "Text-formated STL files are not currently supported"
msgstr ""

#: modify.cpp:252
msgid "Must be sketching in workplane to create tangent arc."
msgstr "Vous devez dessiner dans un plan pour créer un arc tangent."

#: modify.cpp:299
msgid ""
"To create a tangent arc, select a point where two non-construction lines or "
"circles in this group and workplane join."
msgstr ""
"Pour créer un arc tangent, sélectionnez un point où deux lignes (pas de "
"construction) ou cercles de ce groupe et de ce plan se joignent."

#: modify.cpp:386
msgid ""
"Couldn't round this corner. Try a smaller radius, or try creating the "
"desired geometry by hand with tangency constraints."
msgstr ""
"Impossible d'arrondir ce coin. Essayez un rayon plus petit, ou essayez de "
"créer la géométrie souhaitée à la main avec des contraintes tangentielles."

#: modify.cpp:595
msgid "Couldn't split this entity; lines, circles, or cubics only."
msgstr ""
"Impossible de diviser cette entité; Lignes, cercles ou cubiques uniquement."

#: modify.cpp:622
msgid "Must be sketching in workplane to split."
msgstr "Vous devez dessiner dans un plan de travail pour diviser."

#: modify.cpp:629
msgid ""
"Select two entities that intersect each other (e.g. two lines/circles/arcs "
"or a line/circle/arc and a point)."
msgstr ""

#: modify.cpp:734
msgid "Can't split; no intersection found."
msgstr "Impossible de diviser; pas d'intersection trouvée."

#: mouse.cpp:557
msgid "Assign to Style"
msgstr "Appliquer au style"

#: mouse.cpp:573
msgid "No Style"
msgstr "Pas de style"

#: mouse.cpp:576
msgid "Newly Created Custom Style..."
msgstr "Style personnalisé nouvellement créé ..."

#: mouse.cpp:583
msgid "Group Info"
msgstr "Info Groupe"

#: mouse.cpp:603
msgid "Style Info"
msgstr "Info Style"

#: mouse.cpp:623
msgid "Select Edge Chain"
msgstr "Sélection Chaîne d'arêtes"

#: mouse.cpp:629
msgid "Toggle Reference Dimension"
msgstr "Basculer cote maîtresse / cote indicative"

#: mouse.cpp:635
msgid "Other Supplementary Angle"
msgstr "Autre angle supplémentaire"

#: mouse.cpp:640
msgid "Snap to Grid"
msgstr "Accrocher à la grille"

#: mouse.cpp:649
msgid "Remove Spline Point"
msgstr "Effacer le point de la Spline"

#: mouse.cpp:684
msgid "Add Spline Point"
msgstr "Ajouter un point à la Spline"

#: mouse.cpp:688
msgid "Cannot add spline point: maximum number of points reached."
msgstr ""
"Impossible d'ajouter le point spline: nombre maximum de points atteints."

#: mouse.cpp:713
msgid "Toggle Construction"
msgstr "Basculer en mode \"construction\"."

#: mouse.cpp:729
msgid "Delete Point-Coincident Constraint"
msgstr "Effacer la contraint Point-Coïncident"

#: mouse.cpp:747
msgid "Cut"
msgstr "Couper"

#: mouse.cpp:749
msgid "Copy"
msgstr "Copier"

#: mouse.cpp:753
msgid "Select All"
msgstr "Sélectionner tout"

#: mouse.cpp:758
msgid "Paste"
msgstr "Coller"

#: mouse.cpp:760
msgid "Paste Transformed..."
msgstr "Coller transformé..."

#: mouse.cpp:765
msgid "Delete"
msgstr "Effacer"

#: mouse.cpp:768
msgid "Unselect All"
msgstr "Désélectionner tout"

#: mouse.cpp:775
msgid "Unselect Hovered"
msgstr "Désélectionner survolé"

#: mouse.cpp:784
msgid "Zoom to Fit"
msgstr "Zoom pour ajuster"

#: mouse.cpp:986 mouse.cpp:1274
msgid "click next point of line, or press Esc"
msgstr "cliquez pou le prochain point de ligne or appuyez sur Esc"

#: mouse.cpp:992
msgid ""
"Can't draw rectangle in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr ""
"Impossible de dessiner un rectangle en 3d; D'abord, activez un plan de "
"travail avec \"Dessin -> Dans plan de travail\"."

#: mouse.cpp:1026
msgid "click to place other corner of rectangle"
msgstr "cliquez pour placer un autre coin de rectangle"

#: mouse.cpp:1047
msgid "click to set radius"
msgstr "cliquez pour ajuster le rayon"

#: mouse.cpp:1052
msgid ""
"Can't draw arc in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr ""
"Ne peut pas dessiner l'arc en 3d; D'abord, activez un plan de travail avec "
"\"Dessin -> Dans plan de travail\"."

#: mouse.cpp:1071
msgid "click to place point"
msgstr "cliquez pour placer un point"

#: mouse.cpp:1087
msgid "click next point of cubic, or press Esc"
msgstr "cliquez le prochain point cubique ou appuyez sur Esc"

#: mouse.cpp:1092
msgid ""
"Sketching in a workplane already; sketch in 3d before creating new workplane."
msgstr ""
"Vous dessinez déjà dans un plan de travail; Sélectionner \"Dessiner en 3d\" "
"avant de créer un nouveau plan de travail."

#: mouse.cpp:1108
msgid ""
"Can't draw text in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr ""
"Impossible de dessiner du texte en 3d; D'abord, activer un plan de travail "
"avec \"Dessin -> Dans plan de travail\"."

#: mouse.cpp:1125
msgid "click to place bottom right of text"
msgstr ""

#: mouse.cpp:1131
msgid ""
"Can't draw image in 3d; first, activate a workplane with Sketch -> In "
"Workplane."
msgstr ""
"Impossible de dessiner l'image en 3d; D'abord, activez un plan de travail "
"avec \"Dessin -> Dans plan de travail\"."

#: platform/gui.cpp:85 platform/gui.cpp:90 solvespace.cpp:553
msgctxt "file-type"
msgid "SolveSpace models"
msgstr ""

#: platform/gui.cpp:89
msgctxt "file-type"
msgid "ALL"
msgstr ""

#: platform/gui.cpp:91
msgctxt "file-type"
msgid "IDF circuit board"
msgstr ""

#: platform/gui.cpp:92
msgctxt "file-type"
msgid "STL triangle mesh"
msgstr ""

#: platform/gui.cpp:96
msgctxt "file-type"
msgid "PNG image"
msgstr ""

#: platform/gui.cpp:100
msgctxt "file-type"
msgid "STL mesh"
msgstr ""

#: platform/gui.cpp:101
msgctxt "file-type"
msgid "Wavefront OBJ mesh"
msgstr ""

#: platform/gui.cpp:102
msgctxt "file-type"
msgid "Three.js-compatible mesh, with viewer"
msgstr ""

#: platform/gui.cpp:103
msgctxt "file-type"
msgid "Three.js-compatible mesh, mesh only"
msgstr ""

#: platform/gui.cpp:104
msgctxt "file-type"
msgid "VRML text file"
msgstr ""

#: platform/gui.cpp:108 platform/gui.cpp:115 platform/gui.cpp:122
msgctxt "file-type"
msgid "STEP file"
msgstr ""

#: platform/gui.cpp:112
msgctxt "file-type"
msgid "PDF file"
msgstr ""

#: platform/gui.cpp:113
msgctxt "file-type"
msgid "Encapsulated PostScript"
msgstr ""

#: platform/gui.cpp:114
msgctxt "file-type"
msgid "Scalable Vector Graphics"
msgstr ""

#: platform/gui.cpp:116 platform/gui.cpp:123
msgctxt "file-type"
msgid "DXF file (AutoCAD 2007)"
msgstr ""

#: platform/gui.cpp:117
msgctxt "file-type"
msgid "HPGL file"
msgstr ""

#: platform/gui.cpp:118
msgctxt "file-type"
msgid "G Code"
msgstr ""

#: platform/gui.cpp:127
msgctxt "file-type"
msgid "AutoCAD DXF and DWG files"
msgstr ""

#: platform/gui.cpp:131
msgctxt "file-type"
msgid "Comma-separated values"
msgstr ""

#: platform/guigtk.cpp:1382 platform/guimac.mm:1509 platform/guiwin.cpp:1641
msgid "untitled"
msgstr "sans nom"

#: platform/guigtk.cpp:1393 platform/guigtk.cpp:1426 platform/guimac.mm:1467
#: platform/guiwin.cpp:1639
msgctxt "title"
msgid "Save File"
msgstr "Sauver fichier"

#: platform/guigtk.cpp:1394 platform/guigtk.cpp:1427 platform/guimac.mm:1450
#: platform/guiwin.cpp:1645
msgctxt "title"
msgid "Open File"
msgstr "Ouvrir Fichier"

#: platform/guigtk.cpp:1397 platform/guigtk.cpp:1433
msgctxt "button"
msgid "_Cancel"
msgstr "_Annuler"

#: platform/guigtk.cpp:1398 platform/guigtk.cpp:1431
msgctxt "button"
msgid "_Save"
msgstr "_Sauver"

#: platform/guigtk.cpp:1399 platform/guigtk.cpp:1432
msgctxt "button"
msgid "_Open"
msgstr ""

#: solvespace.cpp:171
msgctxt "title"
msgid "Autosave Available"
msgstr "Sauvegarde automatique existante"

#: solvespace.cpp:172
msgctxt "dialog"
msgid "An autosave file is available for this sketch."
msgstr ""

#: solvespace.cpp:173
msgctxt "dialog"
msgid "Do you want to load the autosave file instead?"
msgstr ""

#: solvespace.cpp:174
msgctxt "button"
msgid "&Load autosave"
msgstr ""

#: solvespace.cpp:176
msgctxt "button"
msgid "Do&n't Load"
msgstr ""

#: solvespace.cpp:599
msgctxt "title"
msgid "Modified File"
msgstr "Fichier modifié"

#: solvespace.cpp:601
#, c-format
msgctxt "dialog"
msgid "Do you want to save the changes you made to the sketch “%s”?"
msgstr ""

#: solvespace.cpp:604
msgctxt "dialog"
msgid "Do you want to save the changes you made to the new sketch?"
msgstr ""

#: solvespace.cpp:607
msgctxt "dialog"
msgid "Your changes will be lost if you don't save them."
msgstr ""

#: solvespace.cpp:608
msgctxt "button"
msgid "&Save"
msgstr ""

#: solvespace.cpp:610
msgctxt "button"
msgid "Do&n't Save"
msgstr ""

#: solvespace.cpp:631
msgctxt "title"
msgid "(new sketch)"
msgstr "(nouveau dessin)"

#: solvespace.cpp:638
msgctxt "title"
msgid "Property Browser"
msgstr "Navigateur de propriété"

#: solvespace.cpp:700
msgid ""
"Constraints are currently shown, and will be exported in the toolpath. This "
"is probably not what you want; hide them by clicking the link at the top of "
"the text window."
msgstr ""

#: solvespace.cpp:772
#, c-format
msgid ""
"Can't identify file type from file extension of filename '%s'; try .dxf or ."
"dwg."
msgstr ""

#: solvespace.cpp:824
msgid "Constraint must have a label, and must not be a reference dimension."
msgstr ""

#: solvespace.cpp:828
msgid "Bad selection for step dimension; select a constraint."
msgstr ""

#: solvespace.cpp:852
msgid "The assembly does not interfere, good."
msgstr ""

#: solvespace.cpp:868
#, c-format
msgid ""
"The volume of the solid model is:\n"
"\n"
"    %s"
msgstr ""

#: solvespace.cpp:877
#, c-format
msgid ""
"\n"
"The volume of current group mesh is:\n"
"\n"
"    %s"
msgstr ""

#: solvespace.cpp:882
msgid ""
"\n"
"\n"
"Curved surfaces have been approximated as triangles.\n"
"This introduces error, typically of around 1%."
msgstr ""

#: solvespace.cpp:897
#, c-format
msgid ""
"The surface area of the selected faces is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:906
msgid ""
"This group does not contain a correctly-formed 2d closed area. It is open, "
"not coplanar, or self-intersecting."
msgstr ""

#: solvespace.cpp:918
#, c-format
msgid ""
"The area of the region sketched in this group is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:938
#, c-format
msgid ""
"The total length of the selected entities is:\n"
"\n"
"    %s\n"
"\n"
"Curves have been approximated as piecewise linear.\n"
"This introduces error, typically of around 1%%."
msgstr ""

#: solvespace.cpp:944
msgid "Bad selection for perimeter; select line segments, arcs, and curves."
msgstr ""

#: solvespace.cpp:960
msgid "Bad selection for trace; select a single point."
msgstr ""

#: solvespace.cpp:987
#, c-format
msgid "Couldn't write to '%s'"
msgstr ""

#: solvespace.cpp:1017
msgid "The mesh is self-intersecting (NOT okay, invalid)."
msgstr ""

#: solvespace.cpp:1018
msgid "The mesh is not self-intersecting (okay, valid)."
msgstr ""

#: solvespace.cpp:1020
msgid "The mesh has naked edges (NOT okay, invalid)."
msgstr ""

#: solvespace.cpp:1021
msgid "The mesh is watertight (okay, valid)."
msgstr ""

#: solvespace.cpp:1024
#, c-format
msgid ""
"\n"
"\n"
"The model contains %d triangles, from %d surfaces."
msgstr ""

#: solvespace.cpp:1028
#, c-format
msgid ""
"%s\n"
"\n"
"%s\n"
"\n"
"Zero problematic edges, good.%s"
msgstr ""

#: solvespace.cpp:1031
#, c-format
msgid ""
"%s\n"
"\n"
"%s\n"
"\n"
"%d problematic edges, bad.%s"
msgstr ""

#: solvespace.cpp:1044
#, c-format
msgid ""
"This is SolveSpace version %s.\n"
"\n"
"For more information, see http://solvespace.com/\n"
"\n"
"SolveSpace is free software: you are free to modify\n"
"and/or redistribute it under the terms of the GNU\n"
"General Public License (GPL) version 3 or later.\n"
"\n"
"There is NO WARRANTY, to the extent permitted by\n"
"law. For details, visit http://gnu.org/licenses/\n"
"\n"
"© 2008-%d Jonathan Westhues and other authors.\n"
msgstr ""

#: style.cpp:185
msgid ""
"Can't assign style to an entity that's derived from another entity; try "
"assigning a style to this entity's parent."
msgstr ""
"Impossible d'attribuer le style à une entité dérivée d'une autre entité; "
"Essayez d'attribuer un style au parent de cette entité."

#: style.cpp:735
msgid "Style name cannot be empty"
msgstr "Le nom d'un style ne peut pas être vide"

#: textscreens.cpp:791
msgid "Can't repeat fewer than 1 time."
msgstr "Je ne peux pas répéter moins de 1 fois."

#: textscreens.cpp:795
msgid "Can't repeat more than 999 times."
msgstr "Je ne peux pas répéter plus de 999 fois."

#: textscreens.cpp:820
msgid "Group name cannot be empty"
msgstr "Un nom de groupe ne peut pas être vide"

#: textscreens.cpp:872
msgid "Opacity must be between zero and one."
msgstr "L'opacité doit être entre 0 et 1."

#: textscreens.cpp:907
msgid "Radius cannot be zero or negative."
msgstr "Le rayon ne peut pas être zéro ou négatif."

#: toolbar.cpp:18
msgid "Sketch line segment"
msgstr "Dessin ligne - polyligne"

#: toolbar.cpp:20
msgid "Sketch rectangle"
msgstr "Dessin d'un rectangle"

#: toolbar.cpp:22
msgid "Sketch circle"
msgstr "Dessin d'un cercle"

#: toolbar.cpp:24
msgid "Sketch arc of a circle"
msgstr "Dessin d'un arc de cercle"

#: toolbar.cpp:26
msgid "Sketch curves from text in a TrueType font"
msgstr "Dessin de courbes depuis un texte en police TrueType"

#: toolbar.cpp:28
msgid "Sketch image from a file"
msgstr "Dessin d'une image depuis un fichier"

#: toolbar.cpp:30
msgid "Create tangent arc at selected point"
msgstr "Créer un arc tangent au point sélectionné"

#: toolbar.cpp:32
msgid "Sketch cubic Bezier spline"
msgstr "Dessin d'une spline cubique de Bezier"

#: toolbar.cpp:34
msgid "Sketch datum point"
msgstr "Dessin d'un point"

#: toolbar.cpp:36
msgid "Toggle construction"
msgstr "Basculer en mode \"construction\""

#: toolbar.cpp:38
msgid "Split lines / curves where they intersect"
msgstr "Diviser lignes / courbes où elles se croisent"

#: toolbar.cpp:42
msgid "Constrain distance / diameter / length"
msgstr "Contraindre distance / diamètre / longueur"

#: toolbar.cpp:44
msgid "Constrain angle"
msgstr "Contraindre angle"

#: toolbar.cpp:46
msgid "Constrain to be horizontal"
msgstr "Contraindre à être horizontal"

#: toolbar.cpp:48
msgid "Constrain to be vertical"
msgstr "Contraindre à être vertical"

#: toolbar.cpp:50
msgid "Constrain to be parallel or tangent"
msgstr "Contraindre à être parallèle ou tangent"

#: toolbar.cpp:52
msgid "Constrain to be perpendicular"
msgstr "Contraindre à être perpendiculaire"

#: toolbar.cpp:54
msgid "Constrain point on line / curve / plane / point"
msgstr "Contraindre point sur ligne / courbe / plan / point"

#: toolbar.cpp:56
msgid "Constrain symmetric"
msgstr "Contrainte symétrique"

#: toolbar.cpp:58
msgid "Constrain equal length / radius / angle"
msgstr "Contrainte égale longueur / rayon / angle"

#: toolbar.cpp:60
msgid "Constrain normals in same orientation"
msgstr "Contrainte normales dans la même direction"

#: toolbar.cpp:62
msgid "Other supplementary angle"
msgstr "Autre angle supplémentaire"

#: toolbar.cpp:64
msgid "Toggle reference dimension"
msgstr "Basculer cote maîtresse / cote indicative"

#: toolbar.cpp:68
msgid "New group extruding active sketch"
msgstr "Nouveau groupe d'extrusion du dessin actif"

#: toolbar.cpp:70
msgid "New group rotating active sketch"
msgstr "Nouveau groupe de révolution du dessin actif"

#: toolbar.cpp:72
msgid "New group helix from active sketch"
msgstr ""

#: toolbar.cpp:74
msgid "New group revolve active sketch"
msgstr ""

#: toolbar.cpp:76
msgid "New group step and repeat rotating"
msgstr "Nouveau groupe de répétition circulaire"

#: toolbar.cpp:78
msgid "New group step and repeat translating"
msgstr "Nouveau groupe de répétition linéaire"

#: toolbar.cpp:80
msgid "New group in new workplane (thru given entities)"
msgstr ""
"Nouveau groupe dans un nouveau plan de travail (Par des entités données)"

#: toolbar.cpp:82
msgid "New group in 3d"
msgstr "Nouveau groupe en 3d"

#: toolbar.cpp:84
msgid "New group linking / assembling file"
msgstr "Nouveau groupe lié / assemblage"

#: toolbar.cpp:88
msgid "Nearest isometric view"
msgstr "Vue isométrique la plus proche"

#: toolbar.cpp:90
msgid "Align view to active workplane"
msgstr "Aligner la vue sur le plan de travail actif"

#: util.cpp:165
msgctxt "title"
msgid "Error"
msgstr "Erreur"

#: util.cpp:165
msgctxt "title"
msgid "Message"
msgstr "Message"

#: util.cpp:170
msgctxt "button"
msgid "&OK"
msgstr ""

#: view.cpp:127
msgid "Scale cannot be zero or negative."
msgstr "L'échelle ne peut pas être zéro ou négative."

#: view.cpp:139 view.cpp:148
msgid "Bad format: specify x, y, z"
msgstr "Mauvais format:  Spécifiez x, y, z"

#~ msgid ""
#~ "Bad selection for length ratio constraint. This constraint can apply to:\n"
#~ "\n"
#~ "    * two line segments\n"
#~ msgstr ""
#~ "Mauvaise sélection pour la contrainte du rapport de longueur. Cette "
#~ "contrainte peut s'appliquer à:\n"
#~ "\n"
#~ "    * Deux segments de ligne\n"

#~ msgid ""
#~ "Bad selection for length difference constraint. This constraint can apply "
#~ "to:\n"
#~ "\n"
#~ "    * two line segments\n"
#~ msgstr ""
#~ "Mauvaise sélection pour la contrainte de différence de longueur. Cette "
#~ "contrainte peut s'appliquer à:\n"
#~ "\n"
#~ "    * Deux segments de ligne\n"

#~ msgid "Length Ra&tio"
#~ msgstr "R&apport de Longueur"

#~ msgid "Length Diff&erence"
#~ msgstr "D&ifférence de Longueur"

#~ msgid ""
#~ "Bad selection for new sketch in workplane. This group can be created "
#~ "with:\n"
#~ "\n"
#~ "    * a point (through the point, orthogonal to coordinate axes)\n"
#~ "    * a point and two line segments (through the point, parallel to the "
#~ "lines)\n"
#~ "    * a workplane (copy of the workplane)\n"
#~ msgstr ""
#~ "Mauvaise sélection pour un nouveau dessin dans le plan de travail. Ce "
#~ "groupe peut être créé avec:\n"
#~ "\n"
#~ "    * Un point (par le point, orthogonal aux axes de coordonnées)\n"
#~ "    * Un point et deux segments de ligne (par le point, parallèle aux "
#~ "lignes)\n"
#~ "    * Un plan de travail (copie du plan de travail)\n"

#~ msgid "Specify between 0 and 8 digits after the decimal."
#~ msgstr "Spécifiez entre 0 et 8 chiffres après la virgule."

#~ msgid "Show Degrees of &Freedom"
#~ msgstr "Montrer les Degrés de &Liberté"

#~ msgid "click to place bottom left of text"
#~ msgstr "cliquez pour placer le bas gauche du texte"

#~ msgid "Do you want to save the changes you made to the new sketch?"
#~ msgstr ""
#~ "Voulez-vous enregistrer les modifications que vous avez apportées au "
#~ "nouveau dessin?"

#~ msgid "Your changes will be lost if you don't save them."
#~ msgstr "Vos modifications seront perdues si vous ne les enregistrez pas."

#~ msgctxt "button"
#~ msgid "Save"
#~ msgstr "Sauver"

#~ msgctxt "button"
#~ msgid "Cancel"
#~ msgstr "Annuler"

#~ msgctxt "button"
#~ msgid "Don't Save"
#~ msgstr "Ne pas sauver"

#~ msgid "Do you want to load the autosave file instead?"
#~ msgstr "Voulez-vous charger le fichier de sauvegarde à la place?"

#~ msgctxt "button"
#~ msgid "Load"
#~ msgstr "Charger"

#~ msgctxt "button"
#~ msgid "Don't Load"
#~ msgstr "Ne pas charger"

#~ msgid ""
#~ "Do you want to locate it manually?\n"
#~ "If you select “No”, any geometry that depends on the missing file will be "
#~ "removed."
#~ msgstr ""
#~ "Voulez-vous le localiser manuellement?\n"
#~ "Si vous sélectionnez \"Non\", toute géométrie qui dépend du fichier "
#~ "manquant sera supprimée."

#~ msgctxt "button"
#~ msgid "Yes"
#~ msgstr "Oui"

#~ msgctxt "button"
#~ msgid "No"
#~ msgstr "Non"

#~ msgctxt "button"
#~ msgid "OK"
#~ msgstr "Valider"

#~ msgid "_Cancel"
#~ msgstr "_Annuler"

#~ msgid "_Open"
#~ msgstr "_Ouvrir"

#~ msgid ""
#~ "The file has changed since it was last saved.\n"
#~ "\n"
#~ "Do you want to save the changes?"
#~ msgstr ""
#~ "Le fichier a changé depuis sa dernière sauvegarde.\n"
#~ "\n"
#~ "Voulez-vous enregistrer les modifications?"

#~ msgctxt "button"
#~ msgid "Do_n't Save"
#~ msgstr "_Ne pas sauver"

#~ msgctxt "button"
#~ msgid "_Load autosave"
#~ msgstr "_Charger la sauvegarde automatique"

#~ msgctxt "button"
#~ msgid "Do_n't Load"
#~ msgstr "_Ne pas charger"

#~ msgctxt "button"
#~ msgid "_Yes"
#~ msgstr "_Oui"

#~ msgctxt "button"
#~ msgid "_No"
#~ msgstr "_Non"

#~ msgid "SolveSpace models"
#~ msgstr "Modèles SolveSpace"

#~ msgid "PNG file"
#~ msgstr "Fichier PNG"

#~ msgid "STL mesh"
#~ msgstr "Maillage STL"

#~ msgid "Wavefront OBJ mesh"
#~ msgstr "Maillage Wavefront  OBJ"

#~ msgid "Three.js-compatible mesh, with viewer"
#~ msgstr "Maillage Three-js-compatible, avec visualisateur"

#~ msgid "Three.js-compatible mesh, mesh only"
#~ msgstr "Maillage Three-js-compatible, maillage seul"

#~ msgid "STEP file"
#~ msgstr "Fichier STEP"

#~ msgid "PDF file"
#~ msgstr "Fichier PDF"

#~ msgid "Encapsulated PostScript"
#~ msgstr "Encapsulated PostScript"

#~ msgid "Scalable Vector Graphics"
#~ msgstr "Scalable Vector Graphics"

#~ msgid "DXF file (AutoCAD 2007)"
#~ msgstr "Fichier DXF (AutoCAD 2007)"

#~ msgid "HPGL file"
#~ msgstr "Fichier HPGL"

#~ msgid "G Code"
#~ msgstr "G Code"

#~ msgid "AutoCAD DXF and DWG files"
#~ msgstr "Fichiers AutoCAD DXF et DWG"

#~ msgid "Comma-separated values"
#~ msgstr "Valeurs CSV séparées par des virgules"