Was getting segfaults near here with another patch since removed from the branch.
Moving these assignments after the memfree means they still have
useful data when debugging a crash in memfree.
Allows distancing users from the internal "elem" member.
Add Get() and operator[].
Replace direct references to elem.
Make elem and elemsAllocated private in IdList/List.
In other words, Ctrl inverts the normal action of LMB. It is already
possible to deselect entities through the context menu, but that
can be very awkward on laptop touchpads with a crowded sketch; with
Ctrl, a misclick is easily corrected without moving cursor at all.
This means that automatically added H/V constraints now will never
cause the sketch to become overconstrained, which currently makes
that feature almost unusable.
It makes no sense to solve by substitution (therefore weakening rank
check) in SolveRank(), since that's the whole point of SolveRank().
In addition, because SolveRank() is currently always called right
after AddConstraint(), forceDofCheck would always be true anyway.
In addition, it makes no sense to have TestRankForGroup() dependent
on the result of the previous solve. (For SolveGroup(), solving by
substitution after we know that rank test succeeds makes dragging
points much faster.)
Clarify the name of the command, as the old name is not strictly
correct. E.g. consider a vertical line with a midpoint constraint to
origin has 1 DOF, but 2 highlights are shown. Conversely, a single
datum point has 2 DOF, but 1 highlight is shown.
Supported metric units: km, m, cm, mm, µm, nm.
Supported USCS units: in, mil, µin.
Also, use the newly introduced unit formatting machinery in tools for
measuring perimeter, area and volume, so that e.g. volume is not
displayed in millions of cubic millimeters.
It's not very obvious if the extrusion failed because in a later
group, the solid (by default) uses a very dark gray color that blends
into the black background.
This needs to be done separately because, while we already warn on
broken polygons in workplanes, many more groups can be extruded, e.g.
the canonical way (for now) to mirror a group is to use a rotation,
and that doesn't get checked for closed contour, since most rotations
won't get extruded.
MSVC has a long history of value initialization bugs, and this one is
no exception. In this case, when some MSVC versions (at least up to
2013) are instructed to value-initialize a non-POD class with
a compiler generated non-trivial constructor, it does not zero out
the POD members.
Its only use was in a context where it was completely equivalent to
MemFree, so just use that instead, and keep the temporary heap as
purely an arena allocator, that could use something like bump
pointer.
This is useful in niche cases, like making angular measurement tools.
Also, use simpler and more principled code for numeric precision
while editing constraints: don't special-case angles, but use up to
10 digits after the decimal point for everything.
This is currently necessary to get repeatable results when exporting
assemblies as a part of a batch process, since the mesh geometry in
imported files is not regenerated for export.
Also, mark not just curves, but also points and normals derived from
construction requests as construction.
Also, don't always mark arc center point as construction just to
exclude it from chord tolerance bounding box calculation; instead,
special-case it there.
If a sketch has a "minor" problem, such as being self-intersecting,
this can cause considerably confusion in subsequent groups, yet is
not indicated in the group list.
This commit makes the "err" yellow in such cases. Note that the
indication may not change immediately when a change leading to
trouble is made, since the dependent groups are not recalculated
on all changes.
By setting WINVER=0x0501 (Windows XP) in CMakeLists.txt and adding a few
missing defines in guiwin.cpp and configuring OPENGL=1 in CMake
Solvespace (3.0~25b6eba1) compiles and works perfectly on Windows XP.
Tested with MinGW GCC-6.3.0-1
Before this commit it would prompt for top left and bottom left
corner, neither of which was what in fact was being used. Those two
specific points cannot be used because of the way equations are
written, so instead change that to top left and bottom right, which
is more convenient anyway.
This fixes an elusive GTK issue where tooltips would be spuriously
displayed, and makes tooltips behave nicer on Windows.
Unfortunately the macOS code is unchanged as the macOS tooltip
implementation seems seriously broken in ways I do not understand.
After this commit, if the target system does have modern OpenGL
drivers installed, ANGLE is configured to use them, bypassing most
translation (shaders still have to be translated from ESSL to GLSL).
If there are no OpenGL drivers, such as if the graphics drivers were
installed via Windows Update, DirectX translation is still used. This
results in a very noticeable startup delay and minor performance
degradation.
In addition it is no longer necessary to build with -DOPENGL=1 to be
able to run the binary in wine; everything works out of the box.
Before, wine's incomplete HLSL translator would crash.
This change required renaming the variable `texture` in shaders,
since it shadows the Core GLSL function with the same name, and ANGLE
translates texture2D() calls to texture() calls.
It is not clear why this code was added (I don't remember) and
the normal parent-child relationship should be sufficient for
the task of keeping property browser on top of the main window.
With SetWindowPos(hwnd, HWND_TOPMOST) though, the property browser
window stays on top of *anything*, even if the user switches to
an entirely different application.
This function showed up surprisingly high on a CPU time profile
when the GUI was unresponsive "doing things". Removed a duplicated
difference in the not-equal case, and switched to abs and a single compare
instead of two compares with a negation. It seems to have moved the
function further down in the profile.
Ubuntu 18.04 uses GTKMM 3.22.2-2, which doesn't support native file chooser.
Commit bc3e09edbf checks if native file chooser
is available, but the result is overridden with a hardcoded define,
probably for debugging.
Removing the debugging code fixes build on Ubuntu 18.04.
Before this commit, if the sketch contain no entities with starting
points off of the axis of revolution, the revolution may fail, which
manifests as the face normals being inverted. The code at the top of
MakeFromRevolutionOf() takes the furthest point from the axis,
projects it on that axis to get a vector. In this case that vector
is essentially zero length except for rounding errors.
After this commit, instead of only considering start points of
beziers, all control points are considered.
Fix by @phkahler.
We plan to use flatbuffers in the future for the next generation of
the .slvs file format, so flatbuffers are built unconditionally; and
the Q3DO exporter itself is tiny.
Before this commit, the default font chosen for TTF text is Arial
(chosen by the basename of arial.ttf), which isn't present on most
Linux systems, and cannot be redistributed. After this commit, it is
replaced with Bitstream Vera Sans, which can be. Existing files
are not affected.
The font name in the TTF file was artificially modified to add
the (built-in) suffix, which will need to be done if more built-in
fonts are added.
Modifying the original entities instead of deleting them, retains the
original associated constraints. This makes creating rounded rectangles
a lot easier.
Ryan Pavlik
Ryan Pavlik
whitequark
nabijaczleweli
phkahler
ruevs
EvilSpirit
Dynamo Dan
Werner Almesberger
Ruevski
Ryan A. Pavlik
Bauke Conijn
Zhuowei Zhang
probonopd
Sergiusz Bazanski
Bauke Conijn
luz.paz