can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
according to the user's preference. I templated the housekeeping
stuff for Boolean operations and step and repeat, so it's
relatively clean.
Still need to add the stuff to make a mesh vertex-to-vertex, and to
export sections of a mesh.
[git-p4: depot-paths = "//depot/solvespace/": change = 1959]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
export. So I calculate lighting for each triangle in the mesh, make
a BSP, and then traverse it in-order and output those as SVG or
EPS. And I test edges against the mesh, removing those portions of
the edge that overlap a triangle in front of them (using the
kd-tree to accelerate).
[git-p4: depot-paths = "//depot/solvespace/": change = 1931]
the same precedence as sqrt. Add the code to find naked edges, and
draw them highlighted on the model. And make the direction of trim
curves consistent, always ccw with normal toward viewer; so there's
no need to fix the directions before triangulating.
[git-p4: depot-paths = "//depot/solvespace/": change = 1903]
Add stubs for functions to perform Booleans, and get rid of mesh
stuff, including the kd tree accelerated snap to vertex (which
should not be required if the shell triangulation performs as it
should).
Also check that a sketch is not self-intersecting before extruding
it or whatever. This is dead slow, needs n*log(n) implementation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1902]
shell. That seems less prone generating stray lines, though it does
sometimes generate gaps.
[git-p4: depot-paths = "//depot/solvespace/": change = 1876]
in the numerical code.
And clean some other stuff, in particular simplifying whenever I
have to take the maximum (or minimum) of three quantities.
[git-p4: depot-paths = "//depot/solvespace/": change = 1855]
on the number of pieces that we know how to reassemble is even
stupider. Now dynamically allocated.
[git-p4: depot-paths = "//depot/solvespace/": change = 1837]
These are just a convenience, since it would be possible to get the
same result by drawing a construction line.
[git-p4: depot-paths = "//depot/solvespace/": change = 1836]
based on a chord tolerance. And rewrite the pwl circles to work
against a chord tolerance too (which they really were doing before,
but in funny units).
Also make "assemble" combine type do a union after interference
checking; was previously just copying, which meant that coplanar
faces could break subsequent operations.
And make right-clicking effectively toggle shift key, instead of
forcing it on; so you can pan or rotate with either right or middle
button.
[git-p4: depot-paths = "//depot/solvespace/": change = 1829]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
introduced by the bsp routines. It's usually, though not always,
possible to generate a watertight mesh. The occasions where it's
not look ugly, floating point issues, no quick fix.
And use those to generate a list of edges where two different faces
meet, which I can emphasize for cosmetic reasons (and some UI to
specify whether to do that, and with what color).
And make the right mouse button rotate the model, since that was
previously doing nothing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1821]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
that perspective in the gl matrices, and also everywhere that I
check mouse pointer positions against the model, and for the zoom
to fit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1796]
BSP stuff works. The failures are reported with red stripes and no
depth buffering, and in a message in the text window.
Also improve convergence of point-on-line constraints, and don't
write triangles to export files with limited precision, because
that was making the coplanar tests fail.
[git-p4: depot-paths = "//depot/solvespace/": change = 1774]
metadata. And add point-on-face constraints to go with that. Still
needs some cleanup for the user interface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1766]
create a `new' stack-allocated instance of an object; just From,
possibly different versions with different arg types.
[git-p4: depot-paths = "//depot/solvespace/": change = 1763]
case where you bolt a triangle onto a convex poly, and both
remaining edges of the tri are coincident with the neighbours from
the poly. That was a big source of zero-area triangles.
And tweak some colors a bit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1758]
csg ops; so the union of a red part and a blue part has both red
and blue faces. And some user interface to pick the color in the
text window.
The metadata also include a face, which will be an entity; I can
use that to constrain against. But none of that is yet implemented.
[git-p4: depot-paths = "//depot/solvespace/": change = 1757]
nicely. And to do that, I've added the user interface to show an
edit control in the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1749]
triangle list before adding to the BSP, and check if a point in
plane lies in multiple triangles and choose the one with the
biggest normal magnitude (i.e., area) when testing normal
direction.
[git-p4: depot-paths = "//depot/solvespace/": change = 1745]
implement that. Also make solver work only between the first and
last visible group; earlier can just work from previous solve
result, and later don't matter.
There's some issues with the csg code; it will eventually produce
an open mesh, which is very bad. Not sure whether that's a logic
bug, or a numerical issue; still generating absurd triangles pretty
routinely.
[git-p4: depot-paths = "//depot/solvespace/": change = 1741]
polygon, not just triangles. This helps to avoid needless
splitting. Also test if an entire triangle got inserted in multiple
pieces; if yes, back things out, and just insert the triangle.
Also remove the extra partition stuff, since it didn't seem to help
consistently, and this does.
Still could do some better merging, in the case where an inserted
triangle does not get fully inserted, but we can find a better
triangulation than what the BSP naturally gives.
[git-p4: depot-paths = "//depot/solvespace/": change = 1739]
zero-area triangles, apparently. And make the number of line
segments used to approximate a triangle depend on its scale on
screen.
[git-p4: depot-paths = "//depot/solvespace/": change = 1738]
while building it. That may improve performance, by building a more
balanced tree and actually reducing splitting. Not dramatic
improvements, though; half the triangles for some parts, but no
change or slightly worse for others.
[git-p4: depot-paths = "//depot/solvespace/": change = 1737]
set of coplanar faces. The polygon count still gets stupid fast;
I'm thinking I can fix that by adding some extra test planes at the
top of the 3d BSP, to quickly cull out stuff that doesn't intersect
us.
[git-p4: depot-paths = "//depot/solvespace/": change = 1736]
a triangle mesh in a BSP. That works, although it splits too often,
the initial triangulations are not good quality, and coplanar faces
are not yet handled. I'll do the coplanar thing tomorrow.
[git-p4: depot-paths = "//depot/solvespace/": change = 1735]
Jonathan Westhues