The Valgrind tool can give a full accounting of what memory allocations
have yet to be free()d when the program exits. It is easier to find actual
memory leaks in the code if all non-leaked allocations are elided from that
accounting, which is most easily accomplished by free()ing them.
The "most" qualifier is there because some allocations are difficult/
impossible to free, as they are internal to libraries like OpenGL and Xft.
The best we can hope for is to cover all allocations made by SolveSpace
directly.
The compiler gets nervous when we (for example) pass in a size_t as an int
parameter, or assign an int to a char, or assign -1 to an unsigned type. By
adding appropriate casts, we inform the compiler that, yes, we know what
we're doing.
This change also upgrades a va_arg() type from char to int, as char is
always promoted to int when passed through '...'.
String literals in C++ are implicitly typed as 'const char *', and with
this change, their const-ness is maintained when assigning them to
variables or passing them as arguments. This significantly cuts down the
number of warnings generated by the compiler.
does that, and adds a scale factor to that transformation (instead
of just mirroring, as before), but also:
* Replace the "import mirrored" mechanism with a scale factor,
which if negative corresponds to a reflection as well.
* Fix self-intersection checker to report a meaningful point
when edges are collinear.
* Don't blow an assertion on some types of invalid file;
instead provide a nice error message to the user.
* Clear the naked edges before each regen.
* Don't create zero-length line segments by snapping a line
segment's end to its beginning.
[git-p4: depot-paths = "//depot/solvespace/": change = 2086]
those screw a lot of things up. And add data structure for
clipboard entities, though no code yet.
[git-p4: depot-paths = "//depot/solvespace/": change = 2082]
also means that closed contours will get output as a single path
now, vs. one open path per Bezier segment before.
I've simplified the 2d/3d wireframe export targets somewhat; they
now support only Beziers, without an additional special case for
line segments. The performance penalty for that should not be worth
caring about, since that's infrequent.
And fix a memory leak in FindOuterFacesFrom(), fix ugly output of
filled triangles in PDF (because the line join style did bad things
on long skinny triangles), fix non-zero Z coordinates for exported
views or sections in DXF or STEP.
[git-p4: depot-paths = "//depot/solvespace/": change = 2061]
to assemble Beziers into outer and inner loops, and find those
loops made up of entities with filled styles. The open paths are
maintained in a separate list, and we assemble as many closed paths
as possible even when open paths exist.
This changes many things. The coplanar check is now performed on
the Beziers, not the resulting polygon. The way that the polygon is
used to determine loop directions is also modified.
Also fix the mouse behavior when dragging a point: drop it when the
mouse is released, even if it is released outside the window, but
don't drop it if the pointer is dragged out of and then back into
our window.
Also special-case SSurface::ClosestPointTo() for planes, for speed.
[git-p4: depot-paths = "//depot/solvespace/": change = 2058]
and parametric entities. Also consolidate the text screen functions
to change group options into a single function for everything.
[git-p4: depot-paths = "//depot/solvespace/": change = 2051]
previous group, copy the previous group's mesh into ours, and draw
ours. This makes other stuff that uses that mesh (like the export
and analysis code) work properly.
[git-p4: depot-paths = "//depot/solvespace/": change = 2050]
thisShell or thisMesh; forgot about that when I did the change to
not re-triangulate shells (or re-edge-find meshes) unnecessarily.
[git-p4: depot-paths = "//depot/solvespace/": change = 2049]
instead of tying that to whether the shaded model is shown. And
rewrite all URLs to solvespace.com, not www.solvespace.com, and get
rid of the nag screen that I just added because opening the website
with ShellExecute seems to freeze a bit on startup.
[git-p4: depot-paths = "//depot/solvespace/": change = 2044]
Constraint::COMMENTs), including line width and color, and text
height and origin location.
[git-p4: depot-paths = "//depot/solvespace/": change = 2033]
mechanism. This gets filled in from some defaults, and stored in
the registry. The default styles do not get saved in the file, but
user-created styles (which aren't supported yet) do.
[git-p4: depot-paths = "//depot/solvespace/": change = 2028]
steps in thisShell or thisMesh, and then let the Boolean proceed as
usual. If everything works, then this is equivalent. And it's less
code, and it makes stuff like stepping the step and repeat work.
Also begin to work on line/entity/constraint styles, but no real
work yet.
[git-p4: depot-paths = "//depot/solvespace/": change = 2018]
shell when the current group has thisMesh and thisShell empty was
broken, since rotate or step and repeat groups don't use those.
So force something (doesn't matter what) into thisMesh or thisShell
in a step and repeat group, to make sure it always gets
recalculated and displayed. Ugly fix though.
[git-p4: depot-paths = "//depot/solvespace/": change = 2017]
constraint, so that we can export that too. This includes the lines
for the vector font.
A little ugly; it needs some kind of line style (color or width) to
distinguish those lines from the real geometry in the exported
file.
[git-p4: depot-paths = "//depot/solvespace/": change = 2007]
identical to the previous group's (because our thisShell and
thisMesh are empty), then display the previous group's instead.
This saves us re-triangulating the shell (or recalculating the
edges of a triangle mesh) every time our group gets regenerated,
which was horribly slow.
[git-p4: depot-paths = "//depot/solvespace/": change = 2004]
version number to 1.4, don't include force-hidden entities when
building the loops, and don't show force-hidden entities when that
entity gets copied.
[git-p4: depot-paths = "//depot/solvespace/": change = 1983]
"assemble". And don't show "naked" (not occuring in anti-parallel
pairs) edges when just testing for interference.
[git-p4: depot-paths = "//depot/solvespace/": change = 1967]
of revolution, and put them in the same form as if they had been
draw by an extrusion (so that we can use all the same special case
intersection curves).
And add code to merge coincident faces into one. That turns out to
be more than a cosmetic/efficiency thing, since edge splitting
fails at the join between two coincident faces.
[git-p4: depot-paths = "//depot/solvespace/": change = 1965]
window screen, and remind the user that they could 'fix' the
problem by working with meshes instead.
[git-p4: depot-paths = "//depot/solvespace/": change = 1962]
can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
according to the user's preference. I templated the housekeeping
stuff for Boolean operations and step and repeat, so it's
relatively clean.
Still need to add the stuff to make a mesh vertex-to-vertex, and to
export sections of a mesh.
[git-p4: depot-paths = "//depot/solvespace/": change = 1959]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
a mesh than that's a copy, and if we're working with a shell then
it's the shell's triangulation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1957]
tables from SolveSpace to their own class. This is intended to
simplify use of the constraint solver in a library.
[git-p4: depot-paths = "//depot/solvespace/": change = 1942]
and curve.cpp and surface.cpp contain the rest.
Also get rid of the meshError stuff; will just use the nakedEdges
mechanism for that. And I won't run the interference test
continuously, have added a menu item for that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1934]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
* Rewrite surface handles in curves, so that Booleans beyond
the first don't screw up.
* If an intersection curve is identical to an existing curve
(as happens when faces are coincident), take the piecewise
linearization of the existing curve; this stops us from
screwing up when different shells are pwl'd at different
chord tols.
* Hook up the plane faces again.
* Remove coincident (parallel or anti-parallel) edges from the
coincident-face edge lists when doing Booleans; those may
happen if two faces are coincident with ours.
* Miscellaneous bugfixes.
It doesn't seem to screw up very much now, although tangent edges
(and insufficient pwl resolution) may still cause problems.
[git-p4: depot-paths = "//depot/solvespace/": change = 1929]
trim curves for all surfaces lie between 0 and 1. And add routines
to merge the curves and surfaces from two shells into one, and to
split the trim curves into their piecewise linear segments and then
reassemble them into trim curves.
[git-p4: depot-paths = "//depot/solvespace/": change = 1905]
the same precedence as sqrt. Add the code to find naked edges, and
draw them highlighted on the model. And make the direction of trim
curves consistent, always ccw with normal toward viewer; so there's
no need to fix the directions before triangulating.
[git-p4: depot-paths = "//depot/solvespace/": change = 1903]
Add stubs for functions to perform Booleans, and get rid of mesh
stuff, including the kd tree accelerated snap to vertex (which
should not be required if the shell triangulation performs as it
should).
Also check that a sketch is not self-intersecting before extruding
it or whatever. This is dead slow, needs n*log(n) implementation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1902]
from an extrusion, with piecewise linear trim curves for everything
(that are shared, so that they appear only once for the two
surfaces that each trims). No Boolean operations on them, and the
triangulation is bad, because gl seems to merge collinear edges.
So before going further, I seem to need my own triangulation code.
I have not had great luck in the past, but I can't live without it
now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1899]
so now we've got the exact curve loops, with their direction
standardized so that we can tell which direction is out. We still
need the polygon in any case, since that's a convenient way to find
each curve's winding number.
And remove some more leftover code from mesh sweeps.
[git-p4: depot-paths = "//depot/solvespace/": change = 1897]
but the mesh doesn't get combined. That effectively hides it, good
for looking inside and such.
[git-p4: depot-paths = "//depot/solvespace/": change = 1860]
lets us export open curves, if the user drew them that way.
Also increase the limits on how many pwls we will generate for a
single curve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1854]
theorem; it's evaluated as a surface integral over each triangle.
And don't regenerate the emphasized edges unless we have to;
specifically, don't do it when the only dirty group is the
drawing group.
[git-p4: depot-paths = "//depot/solvespace/": change = 1849]
groups, rename "drawing" groups to "sketch" groups, and keep
assembling even after finding an open curve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1835]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
Daniel Richard G
Jonathan Westhues