easy and useful. Also make the volume measurement use Message(),
and not a separate text window screen.
And make Edit -> Unselect All (Esc) clear the marks drawn to
indicate free parameters, since it clears all the other temporary
stuff drawn in the graphics window.
[git-p4: depot-paths = "//depot/solvespace/": change = 2121]
does that, and adds a scale factor to that transformation (instead
of just mirroring, as before), but also:
* Replace the "import mirrored" mechanism with a scale factor,
which if negative corresponds to a reflection as well.
* Fix self-intersection checker to report a meaningful point
when edges are collinear.
* Don't blow an assertion on some types of invalid file;
instead provide a nice error message to the user.
* Clear the naked edges before each regen.
* Don't create zero-length line segments by snapping a line
segment's end to its beginning.
[git-p4: depot-paths = "//depot/solvespace/": change = 2086]
previously a major bottleneck, and is now at least 10x faster for a
practical section.
And fix a horrible uninit memory bug in the triangle kd-tree stuff;
the split planes were apparently random. This would have slowed
things down, but not caused an incorrect result; except when it
ends up NaN, which is the reason I noticed.
[git-p4: depot-paths = "//depot/solvespace/": change = 2073]
to assemble Beziers into outer and inner loops, and find those
loops made up of entities with filled styles. The open paths are
maintained in a separate list, and we assemble as many closed paths
as possible even when open paths exist.
This changes many things. The coplanar check is now performed on
the Beziers, not the resulting polygon. The way that the polygon is
used to determine loop directions is also modified.
Also fix the mouse behavior when dragging a point: drop it when the
mouse is released, even if it is released outside the window, but
don't drop it if the pointer is dragged out of and then back into
our window.
Also special-case SSurface::ClosestPointTo() for planes, for speed.
[git-p4: depot-paths = "//depot/solvespace/": change = 2058]
and parametric entities. Also consolidate the text screen functions
to change group options into a single function for everything.
[git-p4: depot-paths = "//depot/solvespace/": change = 2051]
surface's domain of u, v in [0, 1]. Cache the starting guess when
projecting a point into a ratpoly surface, to avoid brute force
searching for a good one every time. Split edges even if they
aren't quite inside the trim curve, since the trim boundaries are
pwl, not exact; unnecessary splits won't hurt, but failure to split
when necessary will. Make the triangulation code use a better (but
not perfect) epsilon, to avoid "can't find ear" failures on very
fine meshes.
And turn on compiler optimization! I had somehow forgotten about
that, and it's a ~2x improvement.
[git-p4: depot-paths = "//depot/solvespace/": change = 2026]
a method that works on the piecewise linear segments, and then
refines any intersections that it finds by Newton's method. So now
I support cubics too, and circle-circle intersections, and the code
is much simpler.
[git-p4: depot-paths = "//depot/solvespace/": change = 2012]
Otherwise, we might merge in ways that make things slower (because
the bboxes aren't as tight) or less robust (because the
intersection needs to be split in more places, and that might fail).
[git-p4: depot-paths = "//depot/solvespace/": change = 2003]
contour, except at the ends of the chain), and classify the entire
chain. That's much faster than going edge by edge.
[git-p4: depot-paths = "//depot/solvespace/": change = 2002]
problem or a tendency to generate backwards edges or both, need to
debug that. But it generates the curve, and begins to work.
And change the edge classification. Now instead of testing for
point-on-surface using the results of the raycasting, test for
point-on-surface as a separate step. That stops us from picking up
the additional numerical error from the surface-line intersection,
which may be significant if the ray is parallel or almost parallel
to the surface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1991]
boundary points, at least. That required some changes to what gets
passed around (for example because to project a point onto this
inexact curve, we need to know which two surfaces it trims so that
we can do a Newton's method on them).
And fix stupidity in the way that I calculated edge normals; I just
did normal in uv space, and there's no particular reason why that
would be normal in xyz. So edges in long skinny surfaces failed,
for example.
[git-p4: depot-paths = "//depot/solvespace/": change = 1990]
and their holes into their own advanced faces. So a single surface
with multiple outer contours generates multiple advanced faces.
Also turn the default chord tol down to 1.5 pixels, seems more
likely to make the exact surface Booleans work.
[git-p4: depot-paths = "//depot/solvespace/": change = 1975]
can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
according to the user's preference. I templated the housekeeping
stuff for Boolean operations and step and repeat, so it's
relatively clean.
Still need to add the stuff to make a mesh vertex-to-vertex, and to
export sections of a mesh.
[git-p4: depot-paths = "//depot/solvespace/": change = 1959]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
a grid of quads, with adaptive spacing. The quads that lie entirely
within the trim polygon are triangulated and knocked out from the
polygon, and then the polygon is triangulated.
That works okay, though rather slow. But there are issues with
surfaces of revolution that touch the axis, since they end up with
a singularity. That will require some thought.
[git-p4: depot-paths = "//depot/solvespace/": change = 1951]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
export. So I calculate lighting for each triangle in the mesh, make
a BSP, and then traverse it in-order and output those as SVG or
EPS. And I test edges against the mesh, removing those portions of
the edge that overlap a triangle in front of them (using the
kd-tree to accelerate).
[git-p4: depot-paths = "//depot/solvespace/": change = 1931]
* Rewrite surface handles in curves, so that Booleans beyond
the first don't screw up.
* If an intersection curve is identical to an existing curve
(as happens when faces are coincident), take the piecewise
linearization of the existing curve; this stops us from
screwing up when different shells are pwl'd at different
chord tols.
* Hook up the plane faces again.
* Remove coincident (parallel or anti-parallel) edges from the
coincident-face edge lists when doing Booleans; those may
happen if two faces are coincident with ours.
* Miscellaneous bugfixes.
It doesn't seem to screw up very much now, although tangent edges
(and insufficient pwl resolution) may still cause problems.
[git-p4: depot-paths = "//depot/solvespace/": change = 1929]
trim curves for all surfaces lie between 0 and 1. And add routines
to merge the curves and surfaces from two shells into one, and to
split the trim curves into their piecewise linear segments and then
reassemble them into trim curves.
[git-p4: depot-paths = "//depot/solvespace/": change = 1905]
the same precedence as sqrt. Add the code to find naked edges, and
draw them highlighted on the model. And make the direction of trim
curves consistent, always ccw with normal toward viewer; so there's
no need to fix the directions before triangulating.
[git-p4: depot-paths = "//depot/solvespace/": change = 1903]
Add stubs for functions to perform Booleans, and get rid of mesh
stuff, including the kd tree accelerated snap to vertex (which
should not be required if the shell triangulation performs as it
should).
Also check that a sketch is not self-intersecting before extruding
it or whatever. This is dead slow, needs n*log(n) implementation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1902]
A touches edge B, but does not share a vertex with edge B, then
that's an intersection.
Adjust the ear clipping so that it generates strip-like
triangulations, not fan-like.
And rearrange deck chairs on the bridge-finding code, which is
still pathetically slow. It may not be possible to get reasonable
performance without kd tree type acceleration.
[git-p4: depot-paths = "//depot/solvespace/": change = 1901]
is O(n^2), not perfectly robust, and the bridge-finding code is
particularly bad. But it works, triangulates, and shouldn't ever
generate zero-area triangles like gl does.
[git-p4: depot-paths = "//depot/solvespace/": change = 1900]
from an extrusion, with piecewise linear trim curves for everything
(that are shared, so that they appear only once for the two
surfaces that each trims). No Boolean operations on them, and the
triangulation is bad, because gl seems to merge collinear edges.
So before going further, I seem to need my own triangulation code.
I have not had great luck in the past, but I can't live without it
now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1899]
so now we've got the exact curve loops, with their direction
standardized so that we can tell which direction is out. We still
need the polygon in any case, since that's a convenient way to find
each curve's winding number.
And remove some more leftover code from mesh sweeps.
[git-p4: depot-paths = "//depot/solvespace/": change = 1897]
just applies an offset to the DXF before exporting. Useful enough
to be worth the ugliness, though.
This is the stupid routines from SketchFlat, slightly reworked.
[git-p4: depot-paths = "//depot/solvespace/": change = 1866]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
introduced by the bsp routines. It's usually, though not always,
possible to generate a watertight mesh. The occasions where it's
not look ugly, floating point issues, no quick fix.
And use those to generate a list of edges where two different faces
meet, which I can emphasize for cosmetic reasons (and some UI to
specify whether to do that, and with what color).
And make the right mouse button rotate the model, since that was
previously doing nothing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1821]
which I will shortly revert. gl does a much better job, and I'll
have to spend more time to get something reasonable.
[git-p4: depot-paths = "//depot/solvespace/": change = 1809]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
and rotates, auto-constrain translates in active workplane, speed
up remap list search with a hash table, other stuff.
[git-p4: depot-paths = "//depot/solvespace/": change = 1786]
just the mesh, no derived entities (but I suppose that I could turn
all points into circles).
And fix some bugs where equations didn't get unique IDs, and make
it possible to lock on to the group's workplane automatically, if
you press W while free in 3d with no workplane selected.
[git-p4: depot-paths = "//depot/solvespace/": change = 1780]
BSP stuff works. The failures are reported with red stripes and no
depth buffering, and in a message in the text window.
Also improve convergence of point-on-line constraints, and don't
write triangles to export files with limited precision, because
that was making the coplanar tests fail.
[git-p4: depot-paths = "//depot/solvespace/": change = 1774]
metadata. And add point-on-face constraints to go with that. Still
needs some cleanup for the user interface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1766]
Daniel Richard G
Jonathan Westhues