feared. Though I don't have rational surfaces or curves going yet,
and I don't have the stuff to handle holes or multiple outer
contours in a single surface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1974]
can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
our specified section plane; we then split them according to the
start and endpoints of each STrimBy, using de Castejau's algorithm.
These sections get projected (possibly in perspective, which I do
correctly) into 2d and exported.
Except, for now they just get pwl'd in the export files. That's the
fallback, since it works for any file format. But that's the place
to add special cases for circles etc., or to export them exactly.
DXF supports the latter, but very painfully since I would need to
write a later-versioned file, which requires thousands of lines of
baggage. I'll probably stick with arcs.
[git-p4: depot-paths = "//depot/solvespace/": change = 1936]
and curve.cpp and surface.cpp contain the rest.
Also get rid of the meshError stuff; will just use the nakedEdges
mechanism for that. And I won't run the interference test
continuously, have added a menu item for that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1934]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
export. So I calculate lighting for each triangle in the mesh, make
a BSP, and then traverse it in-order and output those as SVG or
EPS. And I test edges against the mesh, removing those portions of
the edge that overlap a triangle in front of them (using the
kd-tree to accelerate).
[git-p4: depot-paths = "//depot/solvespace/": change = 1931]
from an extrusion, with piecewise linear trim curves for everything
(that are shared, so that they appear only once for the two
surfaces that each trims). No Boolean operations on them, and the
triangulation is bad, because gl seems to merge collinear edges.
So before going further, I seem to need my own triangulation code.
I have not had great luck in the past, but I can't live without it
now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1899]
corresponding to each param from the Jacobian, and see if it loses
rank. If it does then that one was important, so it's bound. Then
display a big blue square around its point until the next normal
solve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1887]
or lines against lines. The constraints get rather screwed up
afterwards, of course.
So make arcs with the endpoints coincident into circles, instead
of nothings; since the first split of a circle produces that.
And don't warn after deleting just point-coincident or horiz/vert
constraints as a dependency; that's just a nuisance, because it
happens too often.
[git-p4: depot-paths = "//depot/solvespace/": change = 1884]
tables in the code, which I have written in perl and am checking
in.
Also get WM_MOUSELEAVE events from win32, so that I can de-hover
everything when the mouse leaves the graphics window. And fix one
of the icons, which was 23x24 instead of 24x24.
[git-p4: depot-paths = "//depot/solvespace/": change = 1883]
auto-showing when a solve fails. And accept expressions, not just
numbers, for that new dimension value.
[git-p4: depot-paths = "//depot/solvespace/": change = 1877]
just applies an offset to the DXF before exporting. Useful enough
to be worth the ugliness, though.
This is the stupid routines from SketchFlat, slightly reworked.
[git-p4: depot-paths = "//depot/solvespace/": change = 1866]
but the mesh doesn't get combined. That effectively hides it, good
for looking inside and such.
[git-p4: depot-paths = "//depot/solvespace/": change = 1860]
linear segments to generate, irrespective of the chord tolerance.
That used to be hard-coded, and it needs to be small enough to
avoid lags while working interactively, but I also need to export
fine geometry.
[git-p4: depot-paths = "//depot/solvespace/": change = 1857]
some magic numbers. This would be trivial to break, but still more
difficult than patching the binary to skip the check...
[git-p4: depot-paths = "//depot/solvespace/": change = 1853]
theorem; it's evaluated as a surface integral over each triangle.
And don't regenerate the emphasized edges unless we have to;
specifically, don't do it when the only dirty group is the
drawing group.
[git-p4: depot-paths = "//depot/solvespace/": change = 1849]
These are just a convenience, since it would be possible to get the
same result by drawing a construction line.
[git-p4: depot-paths = "//depot/solvespace/": change = 1836]
And fix a bug; wasn't asking the user whether to save before
abandoning file when a new file was opened recent.
[git-p4: depot-paths = "//depot/solvespace/": change = 1830]
based on a chord tolerance. And rewrite the pwl circles to work
against a chord tolerance too (which they really were doing before,
but in funny units).
Also make "assemble" combine type do a union after interference
checking; was previously just copying, which meant that coplanar
faces could break subsequent operations.
And make right-clicking effectively toggle shift key, instead of
forcing it on; so you can pan or rotate with either right or middle
button.
[git-p4: depot-paths = "//depot/solvespace/": change = 1829]
all coordinates are divided by that number as we export.
And add functions to store a float in the registry. I'm using those
for the scale factor, and also to replace the crazy scaled integers
that I was using for light positions etc. before.
[git-p4: depot-paths = "//depot/solvespace/": change = 1824]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
introduced by the bsp routines. It's usually, though not always,
possible to generate a watertight mesh. The occasions where it's
not look ugly, floating point issues, no quick fix.
And use those to generate a list of edges where two different faces
meet, which I can emphasize for cosmetic reasons (and some UI to
specify whether to do that, and with what color).
And make the right mouse button rotate the model, since that was
previously doing nothing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1821]
degree angle, but shows with a right angle symbol instead of a
numerical angle you can edit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1819]
version of the code from SketchFlat, with all arbitrary limits
removed.
The TTF text is its own entity, and that entity includes the
font file basename and the text. That's an extra 128 bytes in the
entity, which is around a 50% increase, kind of a shame. It was
simple, though.
[git-p4: depot-paths = "//depot/solvespace/": change = 1814]
liked, but my more parametric attempts were very difficult to use.
The pitch (both axial and radial) gets specified by typing a
distance in a textbox.
[git-p4: depot-paths = "//depot/solvespace/": change = 1804]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
that perspective in the gl matrices, and also everywhere that I
check mouse pointer positions against the model, and for the zoom
to fit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1796]
user-visible text. And make points hoverable/selectable even when
GW.showPoints is false, and zoom to fit before regenerating on file
open, because then we're at the right zoom level (and will use the
right pwl tolerance).
[git-p4: depot-paths = "//depot/solvespace/": change = 1788]
and rotates, auto-constrain translates in active workplane, speed
up remap list search with a hash table, other stuff.
[git-p4: depot-paths = "//depot/solvespace/": change = 1786]
just the mesh, no derived entities (but I suppose that I could turn
all points into circles).
And fix some bugs where equations didn't get unique IDs, and make
it possible to lock on to the group's workplane automatically, if
you press W while free in 3d with no workplane selected.
[git-p4: depot-paths = "//depot/solvespace/": change = 1780]
and requests to a separate list. It's messy, because I have to make
a deep copy (e.g. of the remap list for the groups, or Expr *
stuff) of some things. Others (e.g. the polygon or mesh) will be
regenerated, so they should be discarded, but they must not get
double-freed.
In any case, works superficially. And fix a few memory leaks
unrelated to this, and remove some dead code.
[git-p4: depot-paths = "//depot/solvespace/": change = 1775]
becomes dirty when the user makes a change, and only the dirty
groups get solved. That's a huge effective speedup.
Also add delete function for groups. That has an interesting issue;
it actually ends up recursing on GenerateAll(), since GenerateAll()
calls ClearSuper(), ClearSuper() might need to recreate a group (if
all the groups were deleted), and that would activate the group,
which calls GenerateAll. The right solution is probably a deferred
execution mechanism, where you can schedule something to happen
before we go idle, but not do it right now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1771]
in one place. And remove the ability to disable the solver, since
that's unlikely to be anything but confusing (and in any case, was
badly implemented). This is in preparation for selective solving,
of only the dirty groups.
[git-p4: depot-paths = "//depot/solvespace/": change = 1769]
solid red or yellow. And add user interface to `hide' the faces
(i.e., to make them unselectable), defaulting to hidden in
everything except extrudes or imports.
[git-p4: depot-paths = "//depot/solvespace/": change = 1768]
more starting work on the selectable faces, and fiddling in an
attempt to remove dependencies when stuff gets deleted.
[git-p4: depot-paths = "//depot/solvespace/": change = 1760]
csg ops; so the union of a red part and a blue part has both red
and blue faces. And some user interface to pick the color in the
text window.
The metadata also include a face, which will be an entity; I can
use that to constrain against. But none of that is yet implemented.
[git-p4: depot-paths = "//depot/solvespace/": change = 1757]
recently opened files, that is saved in the registry and displayed
in a separate popup menu.
[git-p4: depot-paths = "//depot/solvespace/": change = 1752]
nicely. And to do that, I've added the user interface to show an
edit control in the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1749]
so e.g. a new extrude starts in free space, which is likely what
you want. And default to an in-workplane group, and tweak the
display of workplanes.
[git-p4: depot-paths = "//depot/solvespace/": change = 1748]
and in the case of a singular Jacobian, report which constraints
can be removed to fix it. Also a mechanism to hover and select
entities and constraints from the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1746]
implement that. Also make solver work only between the first and
last visible group; earlier can just work from previous solve
result, and later don't matter.
There's some issues with the csg code; it will eventually produce
an open mesh, which is very bad. Not sure whether that's a logic
bug, or a numerical issue; still generating absurd triangles pretty
routinely.
[git-p4: depot-paths = "//depot/solvespace/": change = 1741]
as a constraint on the direction cosine, rather than driving the
dot product against a rotated vector to zero. The drawing is the
ugly part; to do that for skew lines, I gave up.
Also add a function to clear non-existent items on the selection
after solving, since that could have caused an oops().
[git-p4: depot-paths = "//depot/solvespace/": change = 1727]
the coordinate system (x, y, z normal vectors) in the bottom left
corner of the screen at all times, and hide group-created
workplanes except when that group is active, and activate that
workplane when the group is activated.
[git-p4: depot-paths = "//depot/solvespace/": change = 1726]
we need something to force the points into plane, and the workplane
supplies that), but otherwise straightforward. And add diameter and
equal radius constraints for the arc.
[git-p4: depot-paths = "//depot/solvespace/": change = 1718]
list, and then adding a new entity to that list, and then looking
at that pointer again. Not okay; the add operation might have
forced a realloc. I have to watch for that.
And add a "distance ratio" constraint, plus a new kind of group
that comes with its own workplane. The workplane is not solved for;
it's generated explicitly in terms of elements that are already
solved.
[git-p4: depot-paths = "//depot/solvespace/": change = 1716]
translation; or equivalently, rotation about an arbitrary axis).
Those will be important for step and repeats, and for imported
parts.
Also fix a terrible memory corruption bug: I was freeing the remap
list after I loaded it from the file, but the code that put that
into the SS.group list made only a shallow copy.
[git-p4: depot-paths = "//depot/solvespace/": change = 1715]
constraints work mod 180 degrees, so that it snaps to however the
workplane was drawn (more vertical vs. more horizontal).
[git-p4: depot-paths = "//depot/solvespace/": change = 1714]
constraints. And generate the constraint equations for entities
(e.g., that our unit quaternions have magnitude one). Numerical
troubles there, but it sort of works. Also some stuff to draw
projection lines with projected constraints, and to auto-insert
more constraints as you draw.
[git-p4: depot-paths = "//depot/solvespace/": change = 1711]
remap when I copy circle entities, in order to make the radius
numerical somehow (analogy with the POINT_ and NORMAL_XFRMD) thing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1710]
segments), add the toggle construction command, and color the lines
differently depending on what group you're in.
Also change dynamic memory stuff to use a Win32 heap for everything
(no malloc), and validate that often. I think I've seen it crash,
though I can't reproduce it.
[git-p4: depot-paths = "//depot/solvespace/": change = 1708]
hadn't previously noticed, because I didn't use to have workplanes
with non-zero offsets. And clean up the interface to normals a bit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1707]
vectors", represented by unit quaternions. This permits me to add
circles, where the normal defines the plane of the circle.
Still many things painful. The interface for editing normals is not
so intuitive, and it's not yet clear how I would e.g. export a
circle entity and recreate it properly, since that entity has a
param not associated with a normal or point.
And the transformed points/normals do not yet support rotations.
That will be necessary soon.
[git-p4: depot-paths = "//depot/solvespace/": change = 1705]
diagonal elements of the matrix summed to -1. Now it's ugly, but I
think that it's correct. And add a command to flip the view to the
other side, which is what started my problems. And tweak display of
H and V and M for constraints: put them in the constraint plane, so
that they're stationary as you rotate around.
[git-p4: depot-paths = "//depot/solvespace/": change = 1704]
faces of the polyhedron. And shade the faces when I draw them, and
fix up our projection matrix so that the depth testing works
properly.
[git-p4: depot-paths = "//depot/solvespace/": change = 1703]
turned out straightforward, in great part because the planes are
workplanes (6 DOF, represented by a unit quaternion and a point),
and therefore make it easy to get a vector in the plane, as well as
a normal.
And on that subject, replace the previous hack for parallel vector
constraints with a better hack: pivot on the initial numerical
guess, to choose which components of the cross product to drive to
zero. Ugly, but I think that will be as robust as I can get.
[git-p4: depot-paths = "//depot/solvespace/": change = 1699]
not have much motivation behind them, but they seem to work. And
make sure that we don't solve multiple times without repainting in
between, and tweak the text window a bit more.
[git-p4: depot-paths = "//depot/solvespace/": change = 1696]
foreground and background colours are now specified separately, and
it's possible to insert half-line spaces. So now I have a window
that lets me show/hide groups, and select the active one.
[git-p4: depot-paths = "//depot/solvespace/": change = 1695]
other entities. This requires a new point type, for a point that's
defined as a transformation of some other point. All works nicely,
I think. There's ugliness because entities are no longer guaranteed
to have a parent request.
Also speed up display of the text window, by caching brushes
instead of recreating for each character (!), and add a bit more
user interface in the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1692]
workplane: a free constraint works in three-space (e.g. true
distance), and a constraint in a workplane works in that plane
(e.g. projected distance). And make the solver go automatically,
though solver itself has lots of pieces missing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1691]
locked on to the XY plane. And simplify the handling of colors in
the text window: identify them by a character, not an integer ID,
since the character is easier to remember.
[git-p4: depot-paths = "//depot/solvespace/": change = 1687]
issues, when the points are not all in the same coordinate system.
All painful, of course. Also add continuous line drawing, and
auto-constraining of line segments as I draw.
[git-p4: depot-paths = "//depot/solvespace/": change = 1683]
determine what goes in front (e.g. put a drawn line in front of the
reference plane, even if the z order would want the opposite), and
some tweaks to the mouse behaviour, and a function to modify
constraints like dimensions so that the are initially satisfied.
[git-p4: depot-paths = "//depot/solvespace/": change = 1681]
the label associated with a constraint. And that even works,
changes the length of the line.
[git-p4: depot-paths = "//depot/solvespace/": change = 1678]
and point-in-plane. These work, but the equation is still stupid,
solving everything at once and not substituting trivial equations.
[git-p4: depot-paths = "//depot/solvespace/": change = 1677]
take the partial derivatives, and run the Newton's method. This
seems to sort of work with a single distance constraint.
[git-p4: depot-paths = "//depot/solvespace/": change = 1675]
points are now entities like any others; so a line segment request
will generate three entities, the line segment and its endpoints. I
think that's cleaner.
When I do step and repeats (and imports, and other similar), I'll
need a consistent way to assign those entity ids. That assignment
must not change if the sketch is edited. I don't have a clean way
to do that; best thought right now is to keep a record of what maps
have been used previously, and not pick a new map as long as it's
possible to use one that was used previously.
This all means that more crap gets pushed in to the Entity
structure, so that they can keep track of what solver variables
define them. Still seems better, though. I'm closer to ready
to start solving.
[git-p4: depot-paths = "//depot/solvespace/": change = 1673]
stuff, though no file load stuff, and perhaps this can all be made
to work from a table somehow. Move the quaternion stuff into its
own class, and add a fancy animated view when you orient onto a
csys.
[git-p4: depot-paths = "//depot/solvespace/": change = 1672]
expressions that we wish to keep around. And make the 2d coordinate
system (that causes points to generate 2 unknowns, not 3) an
attribute of the request, not the group, and add user interface to
change that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1670]
on-screen, and I can drag the label. That's progress. Also
implement a bunch of untested expression stuff, since I'll need
that for the values of the dimensions, for example.
[git-p4: depot-paths = "//depot/solvespace/": change = 1668]
can use the high bits as an "import ID" for imported parts, for
hierarchy (that retains parametric capabilities).
Implement enought that I can draw a datum point or a line segment,
and drag points around in three-space. Still so much to do.
[git-p4: depot-paths = "//depot/solvespace/": change = 1665]
just for display, and any text entry will happen via some floating
text box, same as entering a dimension on the sketch.
Add the hover and selection mechanism, which now seems to work.
Still not clear how to do imported parts, for assemblies and
hierarchy. The handle formats may still have to change.
[git-p4: depot-paths = "//depot/solvespace/": change = 1662]
progress. I want to change the sketch.h stuff fairly significantly,
I think, before proceeding.
[git-p4: depot-paths = "//depot/solvespace/": change = 1657]
draw planes that I will use to do the datum planes. Still haven't
settled upon the request/entity/group structure, and that's the
dependency before doing much real.
[git-p4: depot-paths = "//depot/solvespace/": change = 1656]
the text window every time we refresh the graphics window, because
that's slow. Use classes instead of structs for everything; I don't
understand the template handling for structs. And implement the
IdList, which I will try to use in many places.
[git-p4: depot-paths = "//depot/solvespace/": change = 1655]
and add some (non-functional) menus to the graphics window. Start
to rough in some data structures to hold the sketch. No real work
yet, though.
[git-p4: depot-paths = "//depot/solvespace/": change = 1653]
Jonathan Westhues