These are just a convenience, since it would be possible to get the
same result by drawing a construction line.
[git-p4: depot-paths = "//depot/solvespace/": change = 1836]
groups, rename "drawing" groups to "sketch" groups, and keep
assembling even after finding an open curve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1835]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
degree angle, but shows with a right angle symbol instead of a
numerical angle you can edit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1819]
version of the code from SketchFlat, with all arbitrary limits
removed.
The TTF text is its own entity, and that entity includes the
font file basename and the text. That's an extra 128 bytes in the
entity, which is around a 50% increase, kind of a shame. It was
simple, though.
[git-p4: depot-paths = "//depot/solvespace/": change = 1814]
liked, but my more parametric attempts were very difficult to use.
The pitch (both axial and radial) gets specified by typing a
distance in a textbox.
[git-p4: depot-paths = "//depot/solvespace/": change = 1804]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
that perspective in the gl matrices, and also everywhere that I
check mouse pointer positions against the model, and for the zoom
to fit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1796]
So fix that, and now I can simplify what's exported for an entity.
And add an extra measurement (face-face distance/angle), and some
other little stuff.
[git-p4: depot-paths = "//depot/solvespace/": change = 1789]
user-visible text. And make points hoverable/selectable even when
GW.showPoints is false, and zoom to fit before regenerating on file
open, because then we're at the right zoom level (and will use the
right pwl tolerance).
[git-p4: depot-paths = "//depot/solvespace/": change = 1788]
just the mesh, no derived entities (but I suppose that I could turn
all points into circles).
And fix some bugs where equations didn't get unique IDs, and make
it possible to lock on to the group's workplane automatically, if
you press W while free in 3d with no workplane selected.
[git-p4: depot-paths = "//depot/solvespace/": change = 1780]
up more. Also change from stupid linear search lists to sorted
binary search lists, remove a stupid bug where I double-generated
entities, and don't do the triple drawing of entities (since
offsets on the Z buffer were doing the same job already).
[git-p4: depot-paths = "//depot/solvespace/": change = 1776]
and requests to a separate list. It's messy, because I have to make
a deep copy (e.g. of the remap list for the groups, or Expr *
stuff) of some things. Others (e.g. the polygon or mesh) will be
regenerated, so they should be discarded, but they must not get
double-freed.
In any case, works superficially. And fix a few memory leaks
unrelated to this, and remove some dead code.
[git-p4: depot-paths = "//depot/solvespace/": change = 1775]
to save our registry stuff (because we were calling exit() instead
of doing a PostQuitMessage()), and a misclassification of triangles
coplanar with the test surface, when the test surface contained
zero-area triangles.
[git-p4: depot-paths = "//depot/solvespace/": change = 1773]
using the initial numerical guess of whichever vector is already
known to choose our projection planes.
And add a mechanism to defer showing the text window or
regenerating, in order to simplify dependencies on valid actives.
Also yes/no/cancel when about to abandon an unsaved file, and a
bugfix when rotating a rot/trans point.
[git-p4: depot-paths = "//depot/solvespace/": change = 1772]
becomes dirty when the user makes a change, and only the dirty
groups get solved. That's a huge effective speedup.
Also add delete function for groups. That has an interesting issue;
it actually ends up recursing on GenerateAll(), since GenerateAll()
calls ClearSuper(), ClearSuper() might need to recreate a group (if
all the groups were deleted), and that would activate the group,
which calls GenerateAll. The right solution is probably a deferred
execution mechanism, where you can schedule something to happen
before we go idle, but not do it right now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1771]
in one place. And remove the ability to disable the solver, since
that's unlikely to be anything but confusing (and in any case, was
badly implemented). This is in preparation for selective solving,
of only the dirty groups.
[git-p4: depot-paths = "//depot/solvespace/": change = 1769]
solid red or yellow. And add user interface to `hide' the faces
(i.e., to make them unselectable), defaulting to hidden in
everything except extrudes or imports.
[git-p4: depot-paths = "//depot/solvespace/": change = 1768]
metadata. And add point-on-face constraints to go with that. Still
needs some cleanup for the user interface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1766]
create a `new' stack-allocated instance of an object; just From,
possibly different versions with different arg types.
[git-p4: depot-paths = "//depot/solvespace/": change = 1763]
more starting work on the selectable faces, and fiddling in an
attempt to remove dependencies when stuff gets deleted.
[git-p4: depot-paths = "//depot/solvespace/": change = 1760]
recently opened files, that is saved in the registry and displayed
in a separate popup menu.
[git-p4: depot-paths = "//depot/solvespace/": change = 1752]
nicely. And to do that, I've added the user interface to show an
edit control in the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1749]
so e.g. a new extrude starts in free space, which is likely what
you want. And default to an in-workplane group, and tweak the
display of workplanes.
[git-p4: depot-paths = "//depot/solvespace/": change = 1748]
and in the case of a singular Jacobian, report which constraints
can be removed to fix it. Also a mechanism to hover and select
entities and constraints from the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 1746]
triangle list before adding to the BSP, and check if a point in
plane lies in multiple triangles and choose the one with the
biggest normal magnitude (i.e., area) when testing normal
direction.
[git-p4: depot-paths = "//depot/solvespace/": change = 1745]
implement that. Also make solver work only between the first and
last visible group; earlier can just work from previous solve
result, and later don't matter.
There's some issues with the csg code; it will eventually produce
an open mesh, which is very bad. Not sure whether that's a logic
bug, or a numerical issue; still generating absurd triangles pretty
routinely.
[git-p4: depot-paths = "//depot/solvespace/": change = 1741]
polygon, not just triangles. This helps to avoid needless
splitting. Also test if an entire triangle got inserted in multiple
pieces; if yes, back things out, and just insert the triangle.
Also remove the extra partition stuff, since it didn't seem to help
consistently, and this does.
Still could do some better merging, in the case where an inserted
triangle does not get fully inserted, but we can find a better
triangulation than what the BSP naturally gives.
[git-p4: depot-paths = "//depot/solvespace/": change = 1739]
zero-area triangles, apparently. And make the number of line
segments used to approximate a triangle depend on its scale on
screen.
[git-p4: depot-paths = "//depot/solvespace/": change = 1738]
while building it. That may improve performance, by building a more
balanced tree and actually reducing splitting. Not dramatic
improvements, though; half the triangles for some parts, but no
change or slightly worse for others.
[git-p4: depot-paths = "//depot/solvespace/": change = 1737]
set of coplanar faces. The polygon count still gets stupid fast;
I'm thinking I can fix that by adding some extra test planes at the
top of the 3d BSP, to quickly cull out stuff that doesn't intersect
us.
[git-p4: depot-paths = "//depot/solvespace/": change = 1736]
a triangle mesh in a BSP. That works, although it splits too often,
the initial triangulations are not good quality, and coplanar faces
are not yet handled. I'll do the coplanar thing tomorrow.
[git-p4: depot-paths = "//depot/solvespace/": change = 1735]
for that, and storing the triangles instead of rendering them
immediately. Not sure if that's smart; in theory could change from
implementation to implementation, but the results look much better
than I would get myself.
[git-p4: depot-paths = "//depot/solvespace/": change = 1733]
Jonathan Westhues