closed form. This is a fairly good speedup, and handles tangency
well.
But that shows that tangency has other problems; need to classify
edges correctly (whether they point to a coincident surface) in
curved surfaces too. I need to tweak SShell::ClassifyPoint().
[git-p4: depot-paths = "//depot/solvespace/": change = 1933]
export. So I calculate lighting for each triangle in the mesh, make
a BSP, and then traverse it in-order and output those as SVG or
EPS. And I test edges against the mesh, removing those portions of
the edge that overlap a triangle in front of them (using the
kd-tree to accelerate).
[git-p4: depot-paths = "//depot/solvespace/": change = 1931]
* Rewrite surface handles in curves, so that Booleans beyond
the first don't screw up.
* If an intersection curve is identical to an existing curve
(as happens when faces are coincident), take the piecewise
linearization of the existing curve; this stops us from
screwing up when different shells are pwl'd at different
chord tols.
* Hook up the plane faces again.
* Remove coincident (parallel or anti-parallel) edges from the
coincident-face edge lists when doing Booleans; those may
happen if two faces are coincident with ours.
* Miscellaneous bugfixes.
It doesn't seem to screw up very much now, although tangent edges
(and insufficient pwl resolution) may still cause problems.
[git-p4: depot-paths = "//depot/solvespace/": change = 1929]
trimmed line), and plane-line intersection. Terminate the Bezier
surface subdivision on a chord tolerance, and that seems okay now.
And print info about the graphics adapter in the text window, could
be useful.
Also have a cylinder-detection routine that works; should special
case those surfaces in closed form since they are common, but not
doing it yet.
[git-p4: depot-paths = "//depot/solvespace/": change = 1928]
use that for surface-line intersections. That has major problems
with the heuristic on when to stop and do Newton polishing.
There's also an issue with all the Newton stuff when surfaces join
tangent.
And update the wishlist to reflect current needs.
[git-p4: depot-paths = "//depot/solvespace/": change = 1925]
point, and to intersect three surfaces at a point. So now when we
split an edge, we can refine the split point to lie exactly on the
trim curve, so I can do certain Booleans on curved surfaces.
But surface-line intersection is globally broken, since I don't
correctly detect the number of intersections or provide a good
first guess. I maybe should test by bounding boxes and subdivision.
[git-p4: depot-paths = "//depot/solvespace/": change = 1920]
will do for real; now handling the special cases of plane against a
surface of extrusion. Still need to fix up line-surface
intersection to work for curved things, but then some simple curved
cases should work (as well as plane-plane).
[git-p4: depot-paths = "//depot/solvespace/": change = 1919]
segments in Boolean against the shell, not the intersection
polygon. (We just cast a ray, and use the surface-line intersection
function that already existed.) That's slow, but can be
accelerated later.
[git-p4: depot-paths = "//depot/solvespace/": change = 1911]
non-coincident faces. There's also a problem when I don't generate
the full intersection polygon of shell B against a given surface in
shell A; I need to modify the code to not require that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1910]
is O(n^2), not perfectly robust, and the bridge-finding code is
particularly bad. But it works, triangulates, and shouldn't ever
generate zero-area triangles like gl does.
[git-p4: depot-paths = "//depot/solvespace/": change = 1900]
or lines against lines. The constraints get rather screwed up
afterwards, of course.
So make arcs with the endpoints coincident into circles, instead
of nothings; since the first split of a circle produces that.
And don't warn after deleting just point-coincident or horiz/vert
constraints as a dependency; that's just a nuisance, because it
happens too often.
[git-p4: depot-paths = "//depot/solvespace/": change = 1884]
shell. That seems less prone generating stray lines, though it does
sometimes generate gaps.
[git-p4: depot-paths = "//depot/solvespace/": change = 1876]
in the numerical code.
And clean some other stuff, in particular simplifying whenever I
have to take the maximum (or minimum) of three quantities.
[git-p4: depot-paths = "//depot/solvespace/": change = 1855]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
introduced by the bsp routines. It's usually, though not always,
possible to generate a watertight mesh. The occasions where it's
not look ugly, floating point issues, no quick fix.
And use those to generate a list of edges where two different faces
meet, which I can emphasize for cosmetic reasons (and some UI to
specify whether to do that, and with what color).
And make the right mouse button rotate the model, since that was
previously doing nothing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1821]
(+/-1, 0, 0, 0) to some power; that was failing if the magnitude of
w was slightly greater than 1, so that acos() returned NaN.
[git-p4: depot-paths = "//depot/solvespace/": change = 1820]
which I will shortly revert. gl does a much better job, and I'll
have to spend more time to get something reasonable.
[git-p4: depot-paths = "//depot/solvespace/": change = 1809]
that to try to find them if we can't find them by absolute path.
This is intended to make everything still work if you copy an
entire directory tree of files that import each other.
Also add a mechanism to not paint the scene if we're not sure it's
consistent; otherwise got some crashes on startup. And disable both
text and graphic window when displaying a modal dialog, wasn't
doing that always.
[git-p4: depot-paths = "//depot/solvespace/": change = 1808]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
point-line distance equal to line segment length. These are
available in both normal and projected versions, with fancy display
for all of these.
[git-p4: depot-paths = "//depot/solvespace/": change = 1793]
just the mesh, no derived entities (but I suppose that I could turn
all points into circles).
And fix some bugs where equations didn't get unique IDs, and make
it possible to lock on to the group's workplane automatically, if
you press W while free in 3d with no workplane selected.
[git-p4: depot-paths = "//depot/solvespace/": change = 1780]
up more. Also change from stupid linear search lists to sorted
binary search lists, remove a stupid bug where I double-generated
entities, and don't do the triple drawing of entities (since
offsets on the Z buffer were doing the same job already).
[git-p4: depot-paths = "//depot/solvespace/": change = 1776]
metadata. And add point-on-face constraints to go with that. Still
needs some cleanup for the user interface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1766]
create a `new' stack-allocated instance of an object; just From,
possibly different versions with different arg types.
[git-p4: depot-paths = "//depot/solvespace/": change = 1763]
triangle list before adding to the BSP, and check if a point in
plane lies in multiple triangles and choose the one with the
biggest normal magnitude (i.e., area) when testing normal
direction.
[git-p4: depot-paths = "//depot/solvespace/": change = 1745]
for that, and storing the triangles instead of rendering them
immediately. Not sure if that's smart; in theory could change from
implementation to implementation, but the results look much better
than I would get myself.
[git-p4: depot-paths = "//depot/solvespace/": change = 1733]
not very well; I'm doing a b-rep, where the boundaries are complex
polygons, and there's too many special cases. I should probably
replace this with a triangle mesh solution.
[git-p4: depot-paths = "//depot/solvespace/": change = 1731]
as a constraint on the direction cosine, rather than driving the
dot product against a rotated vector to zero. The drawing is the
ugly part; to do that for skew lines, I gave up.
Also add a function to clear non-existent items on the selection
after solving, since that could have caused an oops().
[git-p4: depot-paths = "//depot/solvespace/": change = 1727]
we need something to force the points into plane, and the workplane
supplies that), but otherwise straightforward. And add diameter and
equal radius constraints for the arc.
[git-p4: depot-paths = "//depot/solvespace/": change = 1718]
list, and then adding a new entity to that list, and then looking
at that pointer again. Not okay; the add operation might have
forced a realloc. I have to watch for that.
And add a "distance ratio" constraint, plus a new kind of group
that comes with its own workplane. The workplane is not solved for;
it's generated explicitly in terms of elements that are already
solved.
[git-p4: depot-paths = "//depot/solvespace/": change = 1716]
translation; or equivalently, rotation about an arbitrary axis).
Those will be important for step and repeats, and for imported
parts.
Also fix a terrible memory corruption bug: I was freeing the remap
list after I loaded it from the file, but the code that put that
into the SS.group list made only a shallow copy.
[git-p4: depot-paths = "//depot/solvespace/": change = 1715]
constraints. And generate the constraint equations for entities
(e.g., that our unit quaternions have magnitude one). Numerical
troubles there, but it sort of works. Also some stuff to draw
projection lines with projected constraints, and to auto-insert
more constraints as you draw.
[git-p4: depot-paths = "//depot/solvespace/": change = 1711]
vectors", represented by unit quaternions. This permits me to add
circles, where the normal defines the plane of the circle.
Still many things painful. The interface for editing normals is not
so intuitive, and it's not yet clear how I would e.g. export a
circle entity and recreate it properly, since that entity has a
param not associated with a normal or point.
And the transformed points/normals do not yet support rotations.
That will be necessary soon.
[git-p4: depot-paths = "//depot/solvespace/": change = 1705]
diagonal elements of the matrix summed to -1. Now it's ugly, but I
think that it's correct. And add a command to flip the view to the
other side, which is what started my problems. And tweak display of
H and V and M for constraints: put them in the constraint plane, so
that they're stationary as you rotate around.
[git-p4: depot-paths = "//depot/solvespace/": change = 1704]
stuff, though no file load stuff, and perhaps this can all be made
to work from a table somehow. Move the quaternion stuff into its
own class, and add a fancy animated view when you orient onto a
csys.
[git-p4: depot-paths = "//depot/solvespace/": change = 1672]
on-screen, and I can drag the label. That's progress. Also
implement a bunch of untested expression stuff, since I'll need
that for the values of the dimensions, for example.
[git-p4: depot-paths = "//depot/solvespace/": change = 1668]
just for display, and any text entry will happen via some floating
text box, same as entering a dimension on the sketch.
Add the hover and selection mechanism, which now seems to work.
Still not clear how to do imported parts, for assemblies and
hierarchy. The handle formats may still have to change.
[git-p4: depot-paths = "//depot/solvespace/": change = 1662]
and I am assuming that many more operations will require lookups in
the IdList<>.
Add code to represent and draw a 2d coordinate system. The origin
is described by a point, and the orientation by a quaternion. So
now it does the same thing before, and draws the reference planes,
but with a lot more lines of code.
[git-p4: depot-paths = "//depot/solvespace/": change = 1658]
Jonathan Westhues