mechanism. This gets filled in from some defaults, and stored in
the registry. The default styles do not get saved in the file, but
user-created styles (which aren't supported yet) do.
[git-p4: depot-paths = "//depot/solvespace/": change = 2028]
steps in thisShell or thisMesh, and then let the Boolean proceed as
usual. If everything works, then this is equivalent. And it's less
code, and it makes stuff like stepping the step and repeat work.
Also begin to work on line/entity/constraint styles, but no real
work yet.
[git-p4: depot-paths = "//depot/solvespace/": change = 2018]
shell when the current group has thisMesh and thisShell empty was
broken, since rotate or step and repeat groups don't use those.
So force something (doesn't matter what) into thisMesh or thisShell
in a step and repeat group, to make sure it always gets
recalculated and displayed. Ugly fix though.
[git-p4: depot-paths = "//depot/solvespace/": change = 2017]
constraint, so that we can export that too. This includes the lines
for the vector font.
A little ugly; it needs some kind of line style (color or width) to
distinguish those lines from the real geometry in the exported
file.
[git-p4: depot-paths = "//depot/solvespace/": change = 2007]
identical to the previous group's (because our thisShell and
thisMesh are empty), then display the previous group's instead.
This saves us re-triangulating the shell (or recalculating the
edges of a triangle mesh) every time our group gets regenerated,
which was horribly slow.
[git-p4: depot-paths = "//depot/solvespace/": change = 2004]
version number to 1.4, don't include force-hidden entities when
building the loops, and don't show force-hidden entities when that
entity gets copied.
[git-p4: depot-paths = "//depot/solvespace/": change = 1983]
"assemble". And don't show "naked" (not occuring in anti-parallel
pairs) edges when just testing for interference.
[git-p4: depot-paths = "//depot/solvespace/": change = 1967]
of revolution, and put them in the same form as if they had been
draw by an extrusion (so that we can use all the same special case
intersection curves).
And add code to merge coincident faces into one. That turns out to
be more than a cosmetic/efficiency thing, since edge splitting
fails at the join between two coincident faces.
[git-p4: depot-paths = "//depot/solvespace/": change = 1965]
window screen, and remind the user that they could 'fix' the
problem by working with meshes instead.
[git-p4: depot-paths = "//depot/solvespace/": change = 1962]
can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
according to the user's preference. I templated the housekeeping
stuff for Boolean operations and step and repeat, so it's
relatively clean.
Still need to add the stuff to make a mesh vertex-to-vertex, and to
export sections of a mesh.
[git-p4: depot-paths = "//depot/solvespace/": change = 1959]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
a mesh than that's a copy, and if we're working with a shell then
it's the shell's triangulation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1957]
tables from SolveSpace to their own class. This is intended to
simplify use of the constraint solver in a library.
[git-p4: depot-paths = "//depot/solvespace/": change = 1942]
and curve.cpp and surface.cpp contain the rest.
Also get rid of the meshError stuff; will just use the nakedEdges
mechanism for that. And I won't run the interference test
continuously, have added a menu item for that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1934]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
* Rewrite surface handles in curves, so that Booleans beyond
the first don't screw up.
* If an intersection curve is identical to an existing curve
(as happens when faces are coincident), take the piecewise
linearization of the existing curve; this stops us from
screwing up when different shells are pwl'd at different
chord tols.
* Hook up the plane faces again.
* Remove coincident (parallel or anti-parallel) edges from the
coincident-face edge lists when doing Booleans; those may
happen if two faces are coincident with ours.
* Miscellaneous bugfixes.
It doesn't seem to screw up very much now, although tangent edges
(and insufficient pwl resolution) may still cause problems.
[git-p4: depot-paths = "//depot/solvespace/": change = 1929]
trim curves for all surfaces lie between 0 and 1. And add routines
to merge the curves and surfaces from two shells into one, and to
split the trim curves into their piecewise linear segments and then
reassemble them into trim curves.
[git-p4: depot-paths = "//depot/solvespace/": change = 1905]
the same precedence as sqrt. Add the code to find naked edges, and
draw them highlighted on the model. And make the direction of trim
curves consistent, always ccw with normal toward viewer; so there's
no need to fix the directions before triangulating.
[git-p4: depot-paths = "//depot/solvespace/": change = 1903]
Add stubs for functions to perform Booleans, and get rid of mesh
stuff, including the kd tree accelerated snap to vertex (which
should not be required if the shell triangulation performs as it
should).
Also check that a sketch is not self-intersecting before extruding
it or whatever. This is dead slow, needs n*log(n) implementation.
[git-p4: depot-paths = "//depot/solvespace/": change = 1902]
from an extrusion, with piecewise linear trim curves for everything
(that are shared, so that they appear only once for the two
surfaces that each trims). No Boolean operations on them, and the
triangulation is bad, because gl seems to merge collinear edges.
So before going further, I seem to need my own triangulation code.
I have not had great luck in the past, but I can't live without it
now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1899]
so now we've got the exact curve loops, with their direction
standardized so that we can tell which direction is out. We still
need the polygon in any case, since that's a convenient way to find
each curve's winding number.
And remove some more leftover code from mesh sweeps.
[git-p4: depot-paths = "//depot/solvespace/": change = 1897]
but the mesh doesn't get combined. That effectively hides it, good
for looking inside and such.
[git-p4: depot-paths = "//depot/solvespace/": change = 1860]
lets us export open curves, if the user drew them that way.
Also increase the limits on how many pwls we will generate for a
single curve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1854]
theorem; it's evaluated as a surface integral over each triangle.
And don't regenerate the emphasized edges unless we have to;
specifically, don't do it when the only dirty group is the
drawing group.
[git-p4: depot-paths = "//depot/solvespace/": change = 1849]
groups, rename "drawing" groups to "sketch" groups, and keep
assembling even after finding an open curve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1835]
specify the plane from which we want to grab the triangles. Shared
edges are then removed with the same code used to check for
watertight meshes, and the remaining edges are assembled into
polygons.
[git-p4: depot-paths = "//depot/solvespace/": change = 1823]
introduced by the bsp routines. It's usually, though not always,
possible to generate a watertight mesh. The occasions where it's
not look ugly, floating point issues, no quick fix.
And use those to generate a list of edges where two different faces
meet, which I can emphasize for cosmetic reasons (and some UI to
specify whether to do that, and with what color).
And make the right mouse button rotate the model, since that was
previously doing nothing.
[git-p4: depot-paths = "//depot/solvespace/": change = 1821]
liked, but my more parametric attempts were very difficult to use.
The pitch (both axial and radial) gets specified by typing a
distance in a textbox.
[git-p4: depot-paths = "//depot/solvespace/": change = 1804]
separate groups. The section is swept normal to the trajectory,
producing a mesh. I'm doing the triangles only now, not copying
over any entities.
Also fix a bug in the PNG export; rows are 4-aligned, so that was
breaking when the width of the image wasn't divisible by four. Also
fix a bug in lathes, where it generated overlapping triangles for
one segment.
And change the groups to record both "this mesh", the contribution
due to the extrude/lathe/whatever, and the "running mesh", that we
get after applying the requested Boolean op between "this mesh" and
the previous group's "running mesh". I'll use that to make step and
repeats step the mesh too.
[git-p4: depot-paths = "//depot/solvespace/": change = 1801]
that perspective in the gl matrices, and also everywhere that I
check mouse pointer positions against the model, and for the zoom
to fit.
[git-p4: depot-paths = "//depot/solvespace/": change = 1796]
and rotates, auto-constrain translates in active workplane, speed
up remap list search with a hash table, other stuff.
[git-p4: depot-paths = "//depot/solvespace/": change = 1786]
just the mesh, no derived entities (but I suppose that I could turn
all points into circles).
And fix some bugs where equations didn't get unique IDs, and make
it possible to lock on to the group's workplane automatically, if
you press W while free in 3d with no workplane selected.
[git-p4: depot-paths = "//depot/solvespace/": change = 1780]
Jonathan Westhues