load it as a texture, and show it instead of a flat-color
background. Includes user interface to specify scale and
translation of image, but the rotation is always aligned to the
view.
[git-p4: depot-paths = "//depot/solvespace/": change = 2071]
under the just-deselected coincident point when I'm working on
batches, which really could have selected that underneath point.
And always pwl curves to at least two line segments (and likewise
retain at least one intermediate point when removing short edges),
to avoid confusion when holes end up square.
[git-p4: depot-paths = "//depot/solvespace/": change = 2070]
everything even partially within that rectangle gets selected when
I release.
Also make deselecting a point deselect all coincident points too;
otherwise there now exist ways to select both coincident points,
which meant that it was impossible to deselect the lower one.
And fix text window to show selection info even if just constraints
are selected, seems more consistent.
[git-p4: depot-paths = "//depot/solvespace/": change = 2066]
which can't be selected with the mouse and would otherwise have to
get deleted by selecting it in the text window.
[git-p4: depot-paths = "//depot/solvespace/": change = 2065]
one point to be dragged simultaneously. So now a dragged point
drags all the selected points and entities, and a dragged entity
drags its points (except for circles, which drag the radius).
This means that the number of forced points for the solver must now
be unlimited, and it is.
Also add commands to invert the selection within the active group,
and to select an edge chain starting from the current selection.
And redo the context menus a bit; still not great, but less
cluttered and more systematic.
[git-p4: depot-paths = "//depot/solvespace/": change = 2064]
contours go with which outer contour) out of exportstep.cpp, since
I'll need that to do filled contour export for the 2d file formats.
Also add user interface to specify fill color.
[git-p4: depot-paths = "//depot/solvespace/": change = 2057]
and parametric entities. Also consolidate the text screen functions
to change group options into a single function for everything.
[git-p4: depot-paths = "//depot/solvespace/": change = 2051]
point-coincident constraints and the entity- or group-generated
constraints. Also fix a bug where a dragged point was not released
when the mouse pointer left the window.
[git-p4: depot-paths = "//depot/solvespace/": change = 2045]
instead of tying that to whether the shaded model is shown. And
rewrite all URLs to solvespace.com, not www.solvespace.com, and get
rid of the nag screen that I just added because opening the website
with ShellExecute seems to freeze a bit on startup.
[git-p4: depot-paths = "//depot/solvespace/": change = 2044]
perspective and parallel projections. Add a snap grid, for points
and for text comments. Draw text comments in the plane of their
workplane if they have one, otherwise always facing forward.
And fix a few nasty bugs: the possibility of an extremely long
animation onto a workplane, accidental use of the wrong style line
width for constraints, misplaced text box in style screen for
default styles, other little stuff.
[git-p4: depot-paths = "//depot/solvespace/": change = 2037]
Constraint::COMMENTs), including line width and color, and text
height and origin location.
[git-p4: depot-paths = "//depot/solvespace/": change = 2033]
formats, with the proper color and width. This may need a bit of
cleanup for stuff like the hidden line removal, which currently
loses the style.
Also fix a bug in the test for arcs of a circle. A second-order
Bezier with collinear control points really is an arc, but it's an
arc with infinite radius so stuff tends to blow up. So return false
for that one.
[git-p4: depot-paths = "//depot/solvespace/": change = 2030]
line width units, on-screen and export visibility. So now we can
use that to modify the default styles, or to create custom styles.
Also add code to draw fat lines, with round endcaps, since gl
doesn't do that.
Next we need some user interface to assign styles to entities, and
to make all the export file formats support the style attributes.
[git-p4: depot-paths = "//depot/solvespace/": change = 2029]
mechanism. This gets filled in from some defaults, and stored in
the registry. The default styles do not get saved in the file, but
user-created styles (which aren't supported yet) do.
[git-p4: depot-paths = "//depot/solvespace/": change = 2028]
size for EPS, etc.). This can either be fixed, with a given width
and height and offset, or automatic, by the left right bottom top
margins.
And draw nicer dimensions for length, with arrows and more
extension lines. Add code to trim those lines against the
(rectangular, axis-aligned) box that contains the actual number,
and use that (instead of the elliptical interpolation, which was
only approximately right) for diameter dimensions too.
[git-p4: depot-paths = "//depot/solvespace/": change = 2027]
(in my case, a SpaceNavigator). I can transform the view of the
part, or transform a part in an assembly.
Also fix up mouse wheel input, so that it works even if it comes in
chunks of less than 120 units.
[git-p4: depot-paths = "//depot/solvespace/": change = 2019]
a method that works on the piecewise linear segments, and then
refines any intersections that it finds by Newton's method. So now
I support cubics too, and circle-circle intersections, and the code
is much simpler.
[git-p4: depot-paths = "//depot/solvespace/": change = 2012]
feared. Though I don't have rational surfaces or curves going yet,
and I don't have the stuff to handle holes or multiple outer
contours in a single surface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1974]
can show edges for both meshes and shells, and export them and
hidden line remove and all the usual stuff.
And fix the zoom to fit on startup, so that it considers hidden
entities too. That avoids the problem where things get generated at
stupid chord tolerance because no entities were visible and the
mesh of course did not yet exist.
[git-p4: depot-paths = "//depot/solvespace/": change = 1961]
exact surface shells. And add interference checking; I'll be lazy
and just do that on the meshes, by modifying the self-intersection
tester to ignore coplanar triangles (since that can happen in an
assembly).
[git-p4: depot-paths = "//depot/solvespace/": change = 1958]
our specified section plane; we then split them according to the
start and endpoints of each STrimBy, using de Castejau's algorithm.
These sections get projected (possibly in perspective, which I do
correctly) into 2d and exported.
Except, for now they just get pwl'd in the export files. That's the
fallback, since it works for any file format. But that's the place
to add special cases for circles etc., or to export them exactly.
DXF supports the latter, but very painfully since I would need to
write a later-versioned file, which requires thousands of lines of
baggage. I'll probably stick with arcs.
[git-p4: depot-paths = "//depot/solvespace/": change = 1936]
and curve.cpp and surface.cpp contain the rest.
Also get rid of the meshError stuff; will just use the nakedEdges
mechanism for that. And I won't run the interference test
continuously, have added a menu item for that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1934]
triangle join. And add controls to show and hide the solid model
edges (independently of the shaded mesh), and to suppress the
shaded triangles from SVG/EPS output.
[git-p4: depot-paths = "//depot/solvespace/": change = 1932]
export. So I calculate lighting for each triangle in the mesh, make
a BSP, and then traverse it in-order and output those as SVG or
EPS. And I test edges against the mesh, removing those portions of
the edge that overlap a triangle in front of them (using the
kd-tree to accelerate).
[git-p4: depot-paths = "//depot/solvespace/": change = 1931]
from an extrusion, with piecewise linear trim curves for everything
(that are shared, so that they appear only once for the two
surfaces that each trims). No Boolean operations on them, and the
triangulation is bad, because gl seems to merge collinear edges.
So before going further, I seem to need my own triangulation code.
I have not had great luck in the past, but I can't live without it
now.
[git-p4: depot-paths = "//depot/solvespace/": change = 1899]
corresponding to each param from the Jacobian, and see if it loses
rank. If it does then that one was important, so it's bound. Then
display a big blue square around its point until the next normal
solve.
[git-p4: depot-paths = "//depot/solvespace/": change = 1887]
or lines against lines. The constraints get rather screwed up
afterwards, of course.
So make arcs with the endpoints coincident into circles, instead
of nothings; since the first split of a circle produces that.
And don't warn after deleting just point-coincident or horiz/vert
constraints as a dependency; that's just a nuisance, because it
happens too often.
[git-p4: depot-paths = "//depot/solvespace/": change = 1884]
tables in the code, which I have written in perl and am checking
in.
Also get WM_MOUSELEAVE events from win32, so that I can de-hover
everything when the mouse leaves the graphics window. And fix one
of the icons, which was 23x24 instead of 24x24.
[git-p4: depot-paths = "//depot/solvespace/": change = 1883]
auto-showing when a solve fails. And accept expressions, not just
numbers, for that new dimension value.
[git-p4: depot-paths = "//depot/solvespace/": change = 1877]
just applies an offset to the DXF before exporting. Useful enough
to be worth the ugliness, though.
This is the stupid routines from SketchFlat, slightly reworked.
[git-p4: depot-paths = "//depot/solvespace/": change = 1866]
but the mesh doesn't get combined. That effectively hides it, good
for looking inside and such.
[git-p4: depot-paths = "//depot/solvespace/": change = 1860]
linear segments to generate, irrespective of the chord tolerance.
That used to be hard-coded, and it needs to be small enough to
avoid lags while working interactively, but I also need to export
fine geometry.
[git-p4: depot-paths = "//depot/solvespace/": change = 1857]
some magic numbers. This would be trivial to break, but still more
difficult than patching the binary to skip the check...
[git-p4: depot-paths = "//depot/solvespace/": change = 1853]
theorem; it's evaluated as a surface integral over each triangle.
And don't regenerate the emphasized edges unless we have to;
specifically, don't do it when the only dirty group is the
drawing group.
[git-p4: depot-paths = "//depot/solvespace/": change = 1849]
These are just a convenience, since it would be possible to get the
same result by drawing a construction line.
[git-p4: depot-paths = "//depot/solvespace/": change = 1836]
And fix a bug; wasn't asking the user whether to save before
abandoning file when a new file was opened recent.
[git-p4: depot-paths = "//depot/solvespace/": change = 1830]
based on a chord tolerance. And rewrite the pwl circles to work
against a chord tolerance too (which they really were doing before,
but in funny units).
Also make "assemble" combine type do a union after interference
checking; was previously just copying, which meant that coplanar
faces could break subsequent operations.
And make right-clicking effectively toggle shift key, instead of
forcing it on; so you can pan or rotate with either right or middle
button.
[git-p4: depot-paths = "//depot/solvespace/": change = 1829]
all coordinates are divided by that number as we export.
And add functions to store a float in the registry. I'm using those
for the scale factor, and also to replace the crazy scaled integers
that I was using for light positions etc. before.
[git-p4: depot-paths = "//depot/solvespace/": change = 1824]
Jonathan Westhues