surface's domain of u, v in [0, 1]. Cache the starting guess when
projecting a point into a ratpoly surface, to avoid brute force
searching for a good one every time. Split edges even if they
aren't quite inside the trim curve, since the trim boundaries are
pwl, not exact; unnecessary splits won't hurt, but failure to split
when necessary will. Make the triangulation code use a better (but
not perfect) epsilon, to avoid "can't find ear" failures on very
fine meshes.
And turn on compiler optimization! I had somehow forgotten about
that, and it's a ~2x improvement.
[git-p4: depot-paths = "//depot/solvespace/": change = 2026]
uv points. This is inconsistent, unless the surface happens to be a
plane square with side length one.
So modify the SBspUv tests to take a surface, and measure distance
linearized in that surface. That fixes at least one
mis-classification bug, and doesn't seem to break anything.
[git-p4: depot-paths = "//depot/solvespace/": change = 2005]
export an inexact curve by approximating it with piecwise cubic
segments (whose endpoints lie exactly on the curve, and with exact
tangent directions at the endpoints).
[git-p4: depot-paths = "//depot/solvespace/": change = 1995]
problem or a tendency to generate backwards edges or both, need to
debug that. But it generates the curve, and begins to work.
And change the edge classification. Now instead of testing for
point-on-surface using the results of the raycasting, test for
point-on-surface as a separate step. That stops us from picking up
the additional numerical error from the surface-line intersection,
which may be significant if the ray is parallel or almost parallel
to the surface.
[git-p4: depot-paths = "//depot/solvespace/": change = 1991]
boundary points, at least. That required some changes to what gets
passed around (for example because to project a point onto this
inexact curve, we need to know which two surfaces it trims so that
we can do a Newton's method on them).
And fix stupidity in the way that I calculated edge normals; I just
did normal in uv space, and there's no particular reason why that
would be normal in xyz. So edges in long skinny surfaces failed,
for example.
[git-p4: depot-paths = "//depot/solvespace/": change = 1990]
of revolution, and put them in the same form as if they had been
draw by an extrusion (so that we can use all the same special case
intersection curves).
And add code to merge coincident faces into one. That turns out to
be more than a cosmetic/efficiency thing, since edge splitting
fails at the join between two coincident faces.
[git-p4: depot-paths = "//depot/solvespace/": change = 1965]
separate polygon of coincident (with same or opposite normal)
faces; I instead test all the edges against the other shell, and
have extended the classify-against-shell stuff to handle those
cases.
And the normals are now perturbed a bit numerically, to either side
of the edge, to distinguish tangency from a coincident surface.
This seems to work fairly well, although things still tend to fail
when the piecewise linear tolerance is too coarse.
[git-p4: depot-paths = "//depot/solvespace/": change = 1964]
parallel axis (which are always lines parallel to that axis).
Remove short pwl segments when possible, to avoid short edges that
get misclassified.
[git-p4: depot-paths = "//depot/solvespace/": change = 1952]
closed form. This is a fairly good speedup, and handles tangency
well.
But that shows that tangency has other problems; need to classify
edges correctly (whether they point to a coincident surface) in
curved surfaces too. I need to tweak SShell::ClassifyPoint().
[git-p4: depot-paths = "//depot/solvespace/": change = 1933]
* Rewrite surface handles in curves, so that Booleans beyond
the first don't screw up.
* If an intersection curve is identical to an existing curve
(as happens when faces are coincident), take the piecewise
linearization of the existing curve; this stops us from
screwing up when different shells are pwl'd at different
chord tols.
* Hook up the plane faces again.
* Remove coincident (parallel or anti-parallel) edges from the
coincident-face edge lists when doing Booleans; those may
happen if two faces are coincident with ours.
* Miscellaneous bugfixes.
It doesn't seem to screw up very much now, although tangent edges
(and insufficient pwl resolution) may still cause problems.
[git-p4: depot-paths = "//depot/solvespace/": change = 1929]
trimmed line), and plane-line intersection. Terminate the Bezier
surface subdivision on a chord tolerance, and that seems okay now.
And print info about the graphics adapter in the text window, could
be useful.
Also have a cylinder-detection routine that works; should special
case those surfaces in closed form since they are common, but not
doing it yet.
[git-p4: depot-paths = "//depot/solvespace/": change = 1928]
use that for surface-line intersections. That has major problems
with the heuristic on when to stop and do Newton polishing.
There's also an issue with all the Newton stuff when surfaces join
tangent.
And update the wishlist to reflect current needs.
[git-p4: depot-paths = "//depot/solvespace/": change = 1925]
point, and to intersect three surfaces at a point. So now when we
split an edge, we can refine the split point to lie exactly on the
trim curve, so I can do certain Booleans on curved surfaces.
But surface-line intersection is globally broken, since I don't
correctly detect the number of intersections or provide a good
first guess. I maybe should test by bounding boxes and subdivision.
[git-p4: depot-paths = "//depot/solvespace/": change = 1920]
will do for real; now handling the special cases of plane against a
surface of extrusion. Still need to fix up line-surface
intersection to work for curved things, but then some simple curved
cases should work (as well as plane-plane).
[git-p4: depot-paths = "//depot/solvespace/": change = 1919]
segments in Boolean against the shell, not the intersection
polygon. (We just cast a ray, and use the surface-line intersection
function that already existed.) That's slow, but can be
accelerated later.
[git-p4: depot-paths = "//depot/solvespace/": change = 1911]
non-coincident faces. There's also a problem when I don't generate
the full intersection polygon of shell B against a given surface in
shell A; I need to modify the code to not require that.
[git-p4: depot-paths = "//depot/solvespace/": change = 1910]
Jonathan Westhues