# French translations for the SolveSpace package. # Copyright (C) 2018 the SolveSpace authors # This file is distributed under the same license as the SolveSpace package. # whitequark , 2018. #zanata msgid "" msgstr "" "Project-Id-Version: SolveSpace 3.0\n" "Report-Msgid-Bugs-To: whitequark@whitequark.org\n" "POT-Creation-Date: 2021-02-01 15:45+0200\n" "PO-Revision-Date: 2018-07-14 06:12+0000\n" "Last-Translator: whitequark \n" "Language-Team: none\n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Zanata 4.4.5\n" "Plural-Forms: nplurals=2; plural=(n > 1);\n" #: clipboard.cpp:310 msgid "" "Cut, paste, and copy work only in a workplane.\n" "\n" "Activate one with Sketch -> In Workplane." msgstr "" "Couper, coller et copier uniquement dans un plan de travail.\n" "\n" "Activez un plan avec \"Dessin -> Dans plan de travail\"." #: clipboard.cpp:327 msgid "Clipboard is empty; nothing to paste." msgstr "Presse papier vide; rien à coller." #: clipboard.cpp:374 msgid "Number of copies to paste must be at least one." msgstr "Le nombre de copies à coller doit être d'au moins un." #: clipboard.cpp:390 textscreens.cpp:783 msgid "Scale cannot be zero." msgstr "L'échelle ne peut pas être zéro." #: clipboard.cpp:432 msgid "Select one point to define origin of rotation." msgstr "Sélectionnez un point pour définir l'origine de la rotation." #: clipboard.cpp:444 msgid "Select two points to define translation vector." msgstr "Sélectionnez deux points pour définir le vecteur de translation." #: clipboard.cpp:454 msgid "" "Transformation is identity. So all copies will be exactly on top of each " "other." msgstr "" "Transformation identique. Donc, toutes les copies seront exactement les unes " "au-dessus des autres." #: clipboard.cpp:458 msgid "Too many items to paste; split this into smaller pastes." msgstr "Trop d'éléments à coller; Divisez-les en plus petits groupes." #: clipboard.cpp:463 msgid "No workplane active." msgstr "Pas d'espace de travail actif." #: confscreen.cpp:418 msgid "Bad format: specify coordinates as x, y, z" msgstr "Mauvais format: spécifiez les coordonnées comme x, y, z" #: confscreen.cpp:428 style.cpp:659 textscreens.cpp:805 msgid "Bad format: specify color as r, g, b" msgstr "Mauvais format; spécifiez la couleur comme r, v, b" #: confscreen.cpp:454 msgid "" "The perspective factor will have no effect until you enable View -> Use " "Perspective Projection." msgstr "" "Le facteur de perspective n'aura aucun effet tant que vous n'aurez pas " "activé \"Affichage -> Utiliser la projection de perspective\"." #: confscreen.cpp:467 confscreen.cpp:477 #, c-format msgid "Specify between 0 and %d digits after the decimal." msgstr "" #: confscreen.cpp:489 msgid "Export scale must not be zero!" msgstr "L'échelle d'export ne doit pas être zéro!" #: confscreen.cpp:501 msgid "Cutter radius offset must not be negative!" msgstr "Le décalage du rayon de coupe ne doit pas être négatif!" #: confscreen.cpp:555 msgid "Bad value: autosave interval should be positive" msgstr "" "Mauvaise valeur: l'intervalle d'enregistrement automatique devrait être " "positif" #: confscreen.cpp:558 msgid "Bad format: specify interval in integral minutes" msgstr "Mauvais format: spécifiez un nombre entier de minutes" #: constraint.cpp:12 msgctxt "constr-name" msgid "pts-coincident" msgstr "pts-coïncidence" #: constraint.cpp:13 msgctxt "constr-name" msgid "pt-pt-distance" msgstr "pt-pt-distance" #: constraint.cpp:14 msgctxt "constr-name" msgid "pt-line-distance" msgstr "pt-ligne-distance" #: constraint.cpp:15 msgctxt "constr-name" msgid "pt-plane-distance" msgstr "pt-plan-distance" #: constraint.cpp:16 msgctxt "constr-name" msgid "pt-face-distance" msgstr "pt-face-distance" #: constraint.cpp:17 msgctxt "constr-name" msgid "proj-pt-pt-distance" msgstr "proj-pt-pt-distance" #: constraint.cpp:18 msgctxt "constr-name" msgid "pt-in-plane" msgstr "pt-dans-plan" #: constraint.cpp:19 msgctxt "constr-name" msgid "pt-on-line" msgstr "pt-sur-ligne" #: constraint.cpp:20 msgctxt "constr-name" msgid "pt-on-face" msgstr "pt-sur-face" #: constraint.cpp:21 msgctxt "constr-name" msgid "eq-length" msgstr "eg-longueur" #: constraint.cpp:22 msgctxt "constr-name" msgid "eq-length-and-pt-ln-dist" msgstr "eg-longueur-et-pt-dans-dist" #: constraint.cpp:23 msgctxt "constr-name" msgid "eq-pt-line-distances" msgstr "eg-pt-ligne-distances" #: constraint.cpp:24 msgctxt "constr-name" msgid "length-ratio" msgstr "longueur-ratio" #: constraint.cpp:25 msgctxt "constr-name" msgid "length-difference" msgstr "longueur-difference" #: constraint.cpp:26 msgctxt "constr-name" msgid "symmetric" msgstr "symétrique" #: constraint.cpp:27 msgctxt "constr-name" msgid "symmetric-h" msgstr "symétrique-h" #: constraint.cpp:28 msgctxt "constr-name" msgid "symmetric-v" msgstr "symétrique-v" #: constraint.cpp:29 msgctxt "constr-name" msgid "symmetric-line" msgstr "symétrique-ligne" #: constraint.cpp:30 msgctxt "constr-name" msgid "at-midpoint" msgstr "au-point-milieu" #: constraint.cpp:31 msgctxt "constr-name" msgid "horizontal" msgstr "horizontal" #: constraint.cpp:32 msgctxt "constr-name" msgid "vertical" msgstr "vertical" #: constraint.cpp:33 msgctxt "constr-name" msgid "diameter" msgstr "diamètre" #: constraint.cpp:34 msgctxt "constr-name" msgid "pt-on-circle" msgstr "pt-sur-cercle" #: constraint.cpp:35 msgctxt "constr-name" msgid "same-orientation" msgstr "même-orientation" #: constraint.cpp:36 msgctxt "constr-name" msgid "angle" msgstr "angle" #: constraint.cpp:37 msgctxt "constr-name" msgid "parallel" msgstr "parallèle" #: constraint.cpp:38 msgctxt "constr-name" msgid "arc-line-tangent" msgstr "arc-ligne-tangente" #: constraint.cpp:39 msgctxt "constr-name" msgid "cubic-line-tangent" msgstr "cubique-ligne-tangente" #: constraint.cpp:40 msgctxt "constr-name" msgid "curve-curve-tangent" msgstr "courbe-courbe-tangente" #: constraint.cpp:41 msgctxt "constr-name" msgid "perpendicular" msgstr "perpendiculaire" #: constraint.cpp:42 msgctxt "constr-name" msgid "eq-radius" msgstr "eg-rayon" #: constraint.cpp:43 msgctxt "constr-name" msgid "eq-angle" msgstr "eg-angle" #: constraint.cpp:44 msgctxt "constr-name" msgid "eq-line-len-arc-len" msgstr "eg-ligne-long-arc-long" #: constraint.cpp:45 msgctxt "constr-name" msgid "lock-where-dragged" msgstr "verrouillé-où-déplacé" #: constraint.cpp:46 msgctxt "constr-name" msgid "comment" msgstr "commentaire" #: constraint.cpp:140 msgid "" "The tangent arc and line segment must share an endpoint. Constrain them with " "Constrain -> On Point before constraining tangent." msgstr "" "L'arc tangent et le segment de ligne doivent partager un point final. " "Contraignez-les avec \"Contrainte -> Sur point avant de contraindre la " "tangente\"." #: constraint.cpp:158 msgid "" "The tangent cubic and line segment must share an endpoint. Constrain them " "with Constrain -> On Point before constraining tangent." msgstr "" "La tangente cubique et le segment de ligne doivent partager un point final. " "Contraignez-les avec \"Contrainte -> Sur point avant de contraindre la " "tangente\"." #: constraint.cpp:183 msgid "" "The curves must share an endpoint. Constrain them with Constrain -> On Point " "before constraining tangent." msgstr "" "Les courbes doivent partager un point final. Contraignez-les avec " "\"Contrainte -> Sur point avant de contraindre la tangente\"." #: constraint.cpp:231 msgid "" "Bad selection for distance / diameter constraint. This constraint can apply " "to:\n" "\n" " * two points (distance between points)\n" " * a line segment (length)\n" " * two points and a line segment or normal (projected distance)\n" " * a workplane and a point (minimum distance)\n" " * a line segment and a point (minimum distance)\n" " * a plane face and a point (minimum distance)\n" " * a circle or an arc (diameter)\n" msgstr "" "Mauvaise sélection pour la contrainte distance / diamètre. Cette contrainte " "peut s'appliquer à:\n" "\n" "    * Deux points (distance entre points)\n" "    * Un segment de ligne (longueur)\n" "    * Deux points et un segment de ligne ou normal (distance projetée)\n" "    * Un plan de travail et un point (distance minimale)\n" "    * Un segment de ligne et un point (distance minimale)\n" "    * Une face plane et un point (distance minimale)\n" "    * Un cercle ou un arc (diamètre)\n" #: constraint.cpp:284 msgid "" "Bad selection for on point / curve / plane constraint. This constraint can " "apply to:\n" "\n" " * two points (points coincident)\n" " * a point and a workplane (point in plane)\n" " * a point and a line segment (point on line)\n" " * a point and a circle or arc (point on curve)\n" " * a point and a plane face (point on face)\n" msgstr "" "Mauvaise sélection pour la contrainte point / courbe / plan. Cette " "contrainte peut s'appliquer à:\n" "\n" "    * Deux points (points coïncidents)\n" "    * Un point et un plan de travail (point dans le plan)\n" "    * Un point et un segment de ligne (point en ligne)\n" "    * Un point et un cercle ou un arc (point sur courbe)\n" "    * Un point et une face plane (point sur une face)\n" #: constraint.cpp:346 msgid "" "Bad selection for equal length / radius constraint. This constraint can " "apply to:\n" "\n" " * two line segments (equal length)\n" " * two line segments and two points (equal point-line distances)\n" " * a line segment and two points (equal point-line distances)\n" " * a line segment, and a point and line segment (point-line distance " "equals length)\n" " * four line segments or normals (equal angle between A,B and C,D)\n" " * three line segments or normals (equal angle between A,B and B,C)\n" " * two circles or arcs (equal radius)\n" " * a line segment and an arc (line segment length equals arc length)\n" msgstr "" "Mauvaise sélection pour une contrainte de longueur / rayon égale. Cette " "contrainte peut s'appliquer à:\n" "\n" "    * Deux segments de ligne (longueur égale)\n" "    * Deux segments de ligne et deux points (distances point-ligne égales)\n" "    * Un segment de ligne et deux points (distances point-ligne égales)\n" "    * Un segment de ligne ou un segment de ligne et point (distance point-" "ligne de longueur égale)\n" "    * Quatre segments de ligne ou des normales (angle entre A, B et C, D " "égaux)\n" "    * Trois segments de ligne ou des normales (angle entre A, B et B, C " "égaux)\n" "    * Deux cercles ou arcs (rayon égaux)\n" "    * Un segment de ligne et un arc (la longueur de segment de ligne est " "égale à la longueur d'arc)\n" #: constraint.cpp:385 msgid "" "Bad selection for length ratio constraint. This constraint can apply to:\n" "\n" " * two line segments\n" msgstr "" "Mauvaise sélection pour la contrainte du rapport de longueur. Cette " "contrainte peut s'appliquer à:\n" "\n" "    * Deux segments de ligne\n" #: constraint.cpp:402 msgid "" "Bad selection for length difference constraint. This constraint can apply " "to:\n" "\n" " * two line segments\n" msgstr "" "Mauvaise sélection pour la contrainte de différence de longueur. Cette " "contrainte peut s'appliquer à:\n" "\n" "    * Deux segments de ligne\n" #: constraint.cpp:428 msgid "" "Bad selection for at midpoint constraint. This constraint can apply to:\n" "\n" " * a line segment and a point (point at midpoint)\n" " * a line segment and a workplane (line's midpoint on plane)\n" msgstr "" "Mauvaise sélection pour une contrainte de point médian. Cette contrainte " "peut s'appliquer à:\n" "\n" "    * Un segment de ligne et un point (point au milieu)\n" "    * Un segment de ligne et un plan de travail (point médian dans le plan)\n" #: constraint.cpp:486 msgid "" "Bad selection for symmetric constraint. This constraint can apply to:\n" "\n" " * two points or a line segment (symmetric about workplane's coordinate " "axis)\n" " * line segment, and two points or a line segment (symmetric about line " "segment)\n" " * workplane, and two points or a line segment (symmetric about " "workplane)\n" msgstr "" "Mauvaise sélection pour la contrainte symétrique. Cette contrainte peut " "s'appliquer à:\n" "\n" "    * Deux points ou un segment de ligne (symétrique à l'axe des coordonnées " "du plan de travail)\n" "    * Segment de ligne, et deux points ou un segment de ligne (symétrique " "sur le segment de ligne)\n" "    * Plan de travail, et deux points ou un segment de ligne (symétrique au " "plan de travail)\n" #: constraint.cpp:500 msgid "" "A workplane must be active when constraining symmetric without an explicit " "symmetry plane." msgstr "" "Un plan de travail doit être actif lors d'une contrainte de symétrie sans " "plan de symétrie explicite." #: constraint.cpp:530 msgid "" "Activate a workplane (with Sketch -> In Workplane) before applying a " "horizontal or vertical constraint." msgstr "" "Activez un plan de travail (avec Dessin -> Dans plan de travail) avant " "d'appliquer une contrainte horizontale ou verticale." #: constraint.cpp:543 msgid "" "Bad selection for horizontal / vertical constraint. This constraint can " "apply to:\n" "\n" " * two points\n" " * a line segment\n" msgstr "" "Mauvaise sélection pour la contrainte horizontale / verticale. Cette " "contrainte peut s'appliquer à:\n" "\n" "    * deux points\n" "    * Un segment de ligne\n" #: constraint.cpp:564 msgid "" "Bad selection for same orientation constraint. This constraint can apply " "to:\n" "\n" " * two normals\n" msgstr "" "Mauvaise sélection pour la même contrainte d'orientation. Cette contrainte " "peut s'appliquer à:\n" "\n" " * Deux normales\n" #: constraint.cpp:614 msgid "Must select an angle constraint." msgstr "Vous devez sélectionner une contrainte d'angle." #: constraint.cpp:627 msgid "Must select a constraint with associated label." msgstr "Vous devez sélectionner une contrainte avec une étiquette associée." #: constraint.cpp:638 msgid "" "Bad selection for angle constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" msgstr "" "Mauvaise sélection pour une contrainte d'angle. Cette contrainte peut " "s'appliquer à:\n" "\n" "    * Deux segments de ligne\n" "    * Un segment de ligne et une normale\n" "    * Deux normales\n" #: constraint.cpp:701 msgid "Curve-curve tangency must apply in workplane." msgstr "Courbe-Courbe tangence doit s'appliquer dans le plan de travail." #: constraint.cpp:711 msgid "" "Bad selection for parallel / tangent constraint. This constraint can apply " "to:\n" "\n" " * two line segments (parallel)\n" " * a line segment and a normal (parallel)\n" " * two normals (parallel)\n" " * two line segments, arcs, or beziers, that share an endpoint (tangent)\n" msgstr "" "Mauvaise sélection pour la contrainte parallèle / tangente. Cette contrainte " "peut s'appliquer à:\n" "\n" "    * Deux segments de ligne (parallèles)\n" "    * Un segment de ligne et un parallèle (parallèle)\n" "    * Deux normales (parallèles)\n" "    * Deux segments de ligne, des arcs ou des Béziers, qui partagent un " "point final (tangent)\n" #: constraint.cpp:729 msgid "" "Bad selection for perpendicular constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" msgstr "" "Mauvaise sélection pour une contrainte perpendiculaire. Cette contrainte " "peut s'appliquer à:\n" "\n" "    * Deux segments de ligne\n" "    * Un segment de ligne et une normale\n" "    * Deux normales\n" #: constraint.cpp:744 msgid "" "Bad selection for lock point where dragged constraint. This constraint can " "apply to:\n" "\n" " * a point\n" msgstr "" "Mauvaise sélection pour le point de verrouillage où la contrainte déplacé. " "Cette contrainte peut s'appliquer à:\n" "\n" "    * un point\n" #: constraint.cpp:755 msgid "click center of comment text" msgstr "cliquez le centre du texte de commentaire" #: export.cpp:19 msgid "" "No solid model present; draw one with extrudes and revolves, or use Export " "2d View to export bare lines and curves." msgstr "" "Aucun modèle solide présent; Dessinez-en un avec une extrusion et " "révolution, ou utilisez \"Exporter vue 2d\" pour exporter les lignes et les " "courbes dépouillées." #: export.cpp:61 msgid "" "Bad selection for export section. Please select:\n" "\n" " * nothing, with an active workplane (workplane is section plane)\n" " * a face (section plane through face)\n" " * a point and two line segments (plane through point and parallel to " "lines)\n" msgstr "" "Mauvaise sélection pour la section export. Sélectionnez:\n" "\n" "    * Rien, avec un plan de travail actif (plan de travail est un plan de " "section)\n" "    * Une face (plan de coupe au-travers d'une face)\n" "    * Un point et deux segments de ligne (plan au-travers d'un point et " "parallèle aux lignes)\n" #: export.cpp:822 msgid "Active group mesh is empty; nothing to export." msgstr "Le maillage du groupe actif est vide; Rien à exporter." #: exportvector.cpp:337 msgid "freehand lines were replaced with continuous lines" msgstr "les lignes à main levée ont été remplacées par des lignes continues" #: exportvector.cpp:339 msgid "zigzag lines were replaced with continuous lines" msgstr "les lignes en zigzag ont été remplacées par des lignes continues" #: exportvector.cpp:593 msgid "" "Some aspects of the drawing have no DXF equivalent and were not exported:\n" msgstr "" "Certains aspects du dessin n'ont pas d'équivalent DXF et n'ont pas été " "exportés:\n" #: exportvector.cpp:839 msgid "" "PDF page size exceeds 200 by 200 inches; many viewers may reject this file." msgstr "" "La taille de la page PDF dépasse 200 par 200 pouces; De nombreux lecteurs " "peuvent rejeter ce fichier." #: file.cpp:44 group.cpp:91 msgctxt "group-name" msgid "sketch-in-plane" msgstr "dessin-dans-plan" #: file.cpp:62 msgctxt "group-name" msgid "#references" msgstr "#références" #: file.cpp:552 msgid "The file is empty. It may be corrupt." msgstr "" #: file.cpp:557 msgid "" "Unrecognized data in file. This file may be corrupt, or from a newer version " "of the program." msgstr "" "Données non reconnues dans le fichier. Ce fichier peut être corrompu ou " "depuis une version plus récente du programme." #: file.cpp:867 msgctxt "title" msgid "Missing File" msgstr "Fichier manquant" #: file.cpp:868 #, c-format msgctxt "dialog" msgid "The linked file “%s” is not present." msgstr "" #: file.cpp:870 msgctxt "dialog" msgid "" "Do you want to locate it manually?\n" "\n" "If you decline, any geometry that depends on the missing file will be " "permanently removed." msgstr "" #: file.cpp:873 msgctxt "button" msgid "&Yes" msgstr "" #: file.cpp:875 msgctxt "button" msgid "&No" msgstr "" #: file.cpp:877 solvespace.cpp:569 msgctxt "button" msgid "&Cancel" msgstr "" #: graphicswin.cpp:41 msgid "&File" msgstr "&Fichier" #: graphicswin.cpp:42 msgid "&New" msgstr "&Nouveau" #: graphicswin.cpp:43 msgid "&Open..." msgstr "&Ouvrir..." #: graphicswin.cpp:44 msgid "Open &Recent" msgstr "Ouvrir &Récent" #: graphicswin.cpp:45 msgid "&Save" msgstr "&Sauver" #: graphicswin.cpp:46 msgid "Save &As..." msgstr "Sauver &Comme..." #: graphicswin.cpp:48 msgid "Export &Image..." msgstr "Exporter &Image..." #: graphicswin.cpp:49 msgid "Export 2d &View..." msgstr "Exporter &vue 2D..." #: graphicswin.cpp:50 msgid "Export 2d &Section..." msgstr "Exporter &Section 2d..." #: graphicswin.cpp:51 msgid "Export 3d &Wireframe..." msgstr "Exporter &Fil de fer 3d..." #: graphicswin.cpp:52 msgid "Export Triangle &Mesh..." msgstr "Exporter Triangle &Maillage..." #: graphicswin.cpp:53 msgid "Export &Surfaces..." msgstr "Export &Surfaces..." #: graphicswin.cpp:54 msgid "Im&port..." msgstr "Im&porter..." #: graphicswin.cpp:57 msgid "E&xit" msgstr "&Quitter" #: graphicswin.cpp:60 msgid "&Edit" msgstr "&Editer" #: graphicswin.cpp:61 msgid "&Undo" msgstr "&Annuler" #: graphicswin.cpp:62 msgid "&Redo" msgstr "&Refaire" #: graphicswin.cpp:63 msgid "Re&generate All" msgstr "Re&générer Tout" #: graphicswin.cpp:65 msgid "Snap Selection to &Grid" msgstr "Accrocher la sélection à la &Grille" #: graphicswin.cpp:66 msgid "Rotate Imported &90°" msgstr "Rotation importation &90°" #: graphicswin.cpp:68 msgid "Cu&t" msgstr "Co&uper" #: graphicswin.cpp:69 msgid "&Copy" msgstr "&Copier" #: graphicswin.cpp:70 msgid "&Paste" msgstr "Co&ller" #: graphicswin.cpp:71 msgid "Paste &Transformed..." msgstr "Coller &Transformer..." #: graphicswin.cpp:72 msgid "&Delete" msgstr "&Effacer" #: graphicswin.cpp:74 msgid "Select &Edge Chain" msgstr "Sélectionner une Chaîne d'&Arêtes" #: graphicswin.cpp:75 msgid "Select &All" msgstr "Sélectionner &Tout" #: graphicswin.cpp:76 msgid "&Unselect All" msgstr "&Désélectionner Tout" #: graphicswin.cpp:78 msgid "&Line Styles..." msgstr "&Ligne styles..." #: graphicswin.cpp:79 msgid "&View Projection..." msgstr "&Affichage Perspective..." #: graphicswin.cpp:81 msgid "Con&figuration..." msgstr "Con&figuration..." #: graphicswin.cpp:84 msgid "&View" msgstr "&Affichage" #: graphicswin.cpp:85 msgid "Zoom &In" msgstr "Zoom &Avant" #: graphicswin.cpp:86 msgid "Zoom &Out" msgstr "Zoom A&rrière" #: graphicswin.cpp:87 msgid "Zoom To &Fit" msgstr "Zoom A&justé" #: graphicswin.cpp:89 msgid "Align View to &Workplane" msgstr "Aligner la vue au &Plan de travail" #: graphicswin.cpp:90 msgid "Nearest &Ortho View" msgstr "Vue &Orthogonale la plus proche" #: graphicswin.cpp:91 msgid "Nearest &Isometric View" msgstr "Vue &Isométrique la plus proche" #: graphicswin.cpp:92 msgid "&Center View At Point" msgstr "&Centrer la Vue sur le Point" #: graphicswin.cpp:94 msgid "Show Snap &Grid" msgstr "Afficher la &grille d'accrochage" #: graphicswin.cpp:95 msgid "Darken Inactive Solids" msgstr "" #: graphicswin.cpp:96 msgid "Use &Perspective Projection" msgstr "Utiliser la vue en &Perspective" #: graphicswin.cpp:97 msgid "Dimension &Units" msgstr "&Unités de dimensions" #: graphicswin.cpp:98 msgid "Dimensions in &Millimeters" msgstr "Dimensions en &Millimètres" #: graphicswin.cpp:99 msgid "Dimensions in M&eters" msgstr "Dimensions en &Mètres" #: graphicswin.cpp:100 msgid "Dimensions in &Inches" msgstr "Dimensions en &Pouces" #: graphicswin.cpp:102 msgid "Show &Toolbar" msgstr "Affichage &Barre d'outils" #: graphicswin.cpp:103 msgid "Show Property Bro&wser" msgstr "Affichage du &Navigateur de Propriété" #: graphicswin.cpp:105 msgid "&Full Screen" msgstr "&Plein Ecran" #: graphicswin.cpp:107 msgid "&New Group" msgstr "&Nouveau Groupe" #: graphicswin.cpp:108 msgid "Sketch In &3d" msgstr "Dessin en &3d" #: graphicswin.cpp:109 msgid "Sketch In New &Workplane" msgstr "Dessin dans un nouveau &Plan de travail" #: graphicswin.cpp:111 msgid "Step &Translating" msgstr "Espacement &Linéaire" #: graphicswin.cpp:112 msgid "Step &Rotating" msgstr "Espacement &Circulaire" #: graphicswin.cpp:114 msgid "E&xtrude" msgstr "E&xtruder" #: graphicswin.cpp:115 msgid "&Helix" msgstr "&Helix" #: graphicswin.cpp:116 msgid "&Lathe" msgstr "&Lathe" #: graphicswin.cpp:117 msgid "Re&volve" msgstr "Ré&volution" #: graphicswin.cpp:119 msgid "Link / Assemble..." msgstr "Lié / Assembler..." #: graphicswin.cpp:120 msgid "Link Recent" msgstr "Lié Récent" #: graphicswin.cpp:122 msgid "&Sketch" msgstr "&Dessin" #: graphicswin.cpp:123 msgid "In &Workplane" msgstr "Dans le &Plan de travail" #: graphicswin.cpp:124 msgid "Anywhere In &3d" msgstr "N'importe où dans la &3d" #: graphicswin.cpp:126 msgid "Datum &Point" msgstr "&Point" #: graphicswin.cpp:127 msgid "&Workplane" msgstr "&Plan de travail" #: graphicswin.cpp:129 msgid "Line &Segment" msgstr "Ligne - &Polyligne" #: graphicswin.cpp:130 msgid "C&onstruction Line Segment" msgstr "Ligne de C&onstruction" #: graphicswin.cpp:131 msgid "&Rectangle" msgstr "&Rectangle" #: graphicswin.cpp:132 msgid "&Circle" msgstr "&Cercle" #: graphicswin.cpp:133 msgid "&Arc of a Circle" msgstr "&Arc de Cercle" #: graphicswin.cpp:134 msgid "&Bezier Cubic Spline" msgstr "Spline Cubique de &Beziers" #: graphicswin.cpp:136 msgid "&Text in TrueType Font" msgstr "&Texte en Police TrueType" #: graphicswin.cpp:137 msgid "&Image" msgstr "&Image" #: graphicswin.cpp:139 msgid "To&ggle Construction" msgstr "&Basculer en mode \"Construction\"" #: graphicswin.cpp:140 msgid "Tangent &Arc at Point" msgstr "&Arc Tangent au Point" #: graphicswin.cpp:141 msgid "Split Curves at &Intersection" msgstr "Diviser les Courbes à l'&Intersection" #: graphicswin.cpp:143 msgid "&Constrain" msgstr "&Constraintes" #: graphicswin.cpp:144 msgid "&Distance / Diameter" msgstr "&Distance / Diamètre" #: graphicswin.cpp:145 msgid "Re&ference Dimension" msgstr "Dimension Maîtresse / Indicative" #: graphicswin.cpp:146 msgid "A&ngle" msgstr "A&ngle" #: graphicswin.cpp:147 msgid "Reference An&gle" msgstr "An&gle Maître / Indicatif" #: graphicswin.cpp:148 msgid "Other S&upplementary Angle" msgstr "Autre angle S&upplémentaire" #: graphicswin.cpp:149 msgid "Toggle R&eference Dim" msgstr "Basculer cote Maîtresse / cote Indicative" #: graphicswin.cpp:151 msgid "&Horizontal" msgstr "&Horizontal" #: graphicswin.cpp:152 msgid "&Vertical" msgstr "&Vertical" #: graphicswin.cpp:154 msgid "&On Point / Curve / Plane" msgstr "&Sur Point / Courbe / Plan" #: graphicswin.cpp:155 msgid "E&qual Length / Radius / Angle" msgstr "&Egale Longueur / Rayon / Angle" #: graphicswin.cpp:156 msgid "Length Ra&tio" msgstr "R&apport de Longueur" #: graphicswin.cpp:157 msgid "Length Diff&erence" msgstr "D&ifférence de Longueur" #: graphicswin.cpp:158 msgid "At &Midpoint" msgstr "Au &Milieu" #: graphicswin.cpp:159 msgid "S&ymmetric" msgstr "&Symétrique" #: graphicswin.cpp:160 msgid "Para&llel / Tangent" msgstr "Para&llèle / Tangent" #: graphicswin.cpp:161 msgid "&Perpendicular" msgstr "&Perpendiculaire" #: graphicswin.cpp:162 msgid "Same Orient&ation" msgstr "Même Orient&ation" #: graphicswin.cpp:163 msgid "Lock Point Where &Dragged" msgstr "Accrocher le point à l'&Emplacement" #: graphicswin.cpp:165 msgid "Comment" msgstr "Commentaire" #: graphicswin.cpp:167 msgid "&Analyze" msgstr "&Analyse" #: graphicswin.cpp:168 msgid "Measure &Volume" msgstr "Mesure &Volume" #: graphicswin.cpp:169 msgid "Measure A&rea" msgstr "Mesure &Aire" #: graphicswin.cpp:170 msgid "Measure &Perimeter" msgstr "Mesure &Périmètre" #: graphicswin.cpp:171 msgid "Show &Interfering Parts" msgstr "Montrer les Pièces &Interférentes" #: graphicswin.cpp:172 msgid "Show &Naked Edges" msgstr "Montrer les Arêtes &Nues" #: graphicswin.cpp:173 msgid "Show &Center of Mass" msgstr "Montrer le &Centre de Gravité" #: graphicswin.cpp:175 msgid "Show &Underconstrained Points" msgstr "Montrer les &sous-contraintes Points" #: graphicswin.cpp:177 msgid "&Trace Point" msgstr "&Tracer Point" #: graphicswin.cpp:178 msgid "&Stop Tracing..." msgstr "&Arrêt Tracé..." #: graphicswin.cpp:179 msgid "Step &Dimension..." msgstr "Espacement &Dimension..." #: graphicswin.cpp:181 msgid "&Help" msgstr "&Aide" #: graphicswin.cpp:182 msgid "&Language" msgstr "&Langue" #: graphicswin.cpp:183 msgid "&Website / Manual" msgstr "&Site web / Manuel" #: graphicswin.cpp:185 msgid "&About" msgstr "&A propos" #: graphicswin.cpp:355 msgid "(no recent files)" msgstr "(pas de fichier récent)" #: graphicswin.cpp:363 #, c-format msgid "File '%s' does not exist." msgstr "" #: graphicswin.cpp:725 msgid "No workplane is active, so the grid will not appear." msgstr "Pas de plan de travail actif, donc la grille ne va pas apparaître." #: graphicswin.cpp:740 msgid "" "The perspective factor is set to zero, so the view will always be a parallel " "projection.\n" "\n" "For a perspective projection, modify the perspective factor in the " "configuration screen. A value around 0.3 is typical." msgstr "" "Le facteur de perspective est réglé à 0, donc la vue restera une projection " "parallèle.\n" "\n" "Pour une projection en perspective, modifiez le facteur de perspective dans " "l'écran de configuration. Une valeur d'environ 0,3 est typique." #: graphicswin.cpp:819 msgid "" "Select a point; this point will become the center of the view on screen." msgstr "" "Sélectionnez un point. Ce point deviendra le centre de la vue à l'écran." #: graphicswin.cpp:1114 msgid "No additional entities share endpoints with the selected entities." msgstr "" "Aucune entité supplémentaire ne partage des points d'extrémité avec les " "entités sélectionnées." #: graphicswin.cpp:1132 msgid "" "To use this command, select a point or other entity from an linked part, or " "make a link group the active group." msgstr "" "Pour utiliser cette commande, sélectionnez un point ou une autre entité à " "partir d'une pièce liée ou créez un groupe de liens dans le groupe actif." #: graphicswin.cpp:1155 msgid "" "No workplane is active. Activate a workplane (with Sketch -> In Workplane) " "to define the plane for the snap grid." msgstr "" "Aucun plan de travail n'est actif. Activez un plan de travail (avec Dessin -" "> Dans plan de travail) pour définir le plan pour la grille d'accrochage." #: graphicswin.cpp:1162 msgid "" "Can't snap these items to grid; select points, text comments, or constraints " "with a label. To snap a line, select its endpoints." msgstr "" "Impossible d'accrocher ces éléments à la grille. Sélectionnez des points, " "des textes de commentaires ou des contraintes avec une étiquette. Pour " "accrocher une ligne, sélectionnez ses points d'extrémité." #: graphicswin.cpp:1247 msgid "No workplane selected. Activating default workplane for this group." msgstr "" "Aucun plan de travail sélectionné. Activation du plan de travail par défaut " "pour ce groupe." #: graphicswin.cpp:1250 msgid "" "No workplane is selected, and the active group does not have a default " "workplane. Try selecting a workplane, or activating a sketch-in-new-" "workplane group." msgstr "" "Aucun plan de travail n'est sélectionné et le groupe actif n'a pas de plan " "de travail par défaut. Essayez de sélectionner un plan de travail ou " "d'activer un groupe de \"Dessin dans nouveau plan travail\"." #: graphicswin.cpp:1271 msgid "" "Bad selection for tangent arc at point. Select a single point, or select " "nothing to set up arc parameters." msgstr "" "Mauvaise sélection pour l'arc tangent au point. Sélectionnez un seul point, " "ou ne sélectionnez rien pour configurer les paramètres de l'arc." #: graphicswin.cpp:1282 msgid "click point on arc (draws anti-clockwise)" msgstr "" "cliquez un point sur l'arc (dessine dans le sens inverse des aiguilles d'une " "montre)" #: graphicswin.cpp:1283 msgid "click to place datum point" msgstr "cliquez pour placer un point" #: graphicswin.cpp:1284 msgid "click first point of line segment" msgstr "cliquez le premier point du segment de ligne" #: graphicswin.cpp:1286 msgid "click first point of construction line segment" msgstr "cliquez le premier point de la ligne de construction" #: graphicswin.cpp:1287 msgid "click first point of cubic segment" msgstr "cliquez le premier point du segment cubique" #: graphicswin.cpp:1288 msgid "click center of circle" msgstr "cliquez pour placer le centre du cercle" #: graphicswin.cpp:1289 msgid "click origin of workplane" msgstr "cliquez pour placer l'origine du plan de travail" #: graphicswin.cpp:1290 msgid "click one corner of rectangle" msgstr "cliquez un coin du rectangle" #: graphicswin.cpp:1291 msgid "click top left of text" msgstr "cliquez le haut à gauche du texte" #: graphicswin.cpp:1297 msgid "click top left of image" msgstr "cliquez le haut à gauche de l'image" #: graphicswin.cpp:1309 msgid "" "No entities are selected. Select entities before trying to toggle their " "construction state." msgstr "" "Aucune entité n'est sélectionnée. Sélectionnez les entités avant d'essayer " "de basculer leurs états de construction." #: group.cpp:86 msgctxt "group-name" msgid "sketch-in-3d" msgstr "dessin-en-3d" #: group.cpp:142 msgid "" "Bad selection for new sketch in workplane. This group can be created with:\n" "\n" " * a point (through the point, orthogonal to coordinate axes)\n" " * a point and two line segments (through the point, parallel to the " "lines)\n" " * a workplane (copy of the workplane)\n" msgstr "" "Mauvaise sélection pour un nouveau dessin dans le plan de travail. Ce groupe " "peut être créé avec:\n" "\n" "    * Un point (par le point, orthogonal aux axes de coordonnées)\n" "    * Un point et deux segments de ligne (par le point, parallèle aux " "lignes)\n" "    * Un plan de travail (copie du plan de travail)\n" #: group.cpp:154 msgid "" "Activate a workplane (Sketch -> In Workplane) before extruding. The sketch " "will be extruded normal to the workplane." msgstr "" "Activez un plan de travail (Dessin -> Dans plan de travail) avant " "l'extrusion. Le croquis sera extrudé normalement au plan de travail." #: group.cpp:163 msgctxt "group-name" msgid "extrude" msgstr "extruder" #: group.cpp:168 msgid "Lathe operation can only be applied to planar sketches." msgstr "" #: group.cpp:179 msgid "" "Bad selection for new lathe group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" "Mauvaise sélection pour un nouveau groupe de révolution. Ce groupe peut être " "créé avec:\n" "\n" "    * Un point et un segment de ligne ou normal (révolution autour d'un axe " "parallèle à la ligne / point normal, par le point)\n" "    * Un segment de ligne (révolution sur le segment de ligne)\n" #: group.cpp:189 msgctxt "group-name" msgid "lathe" msgstr "révolution" #: group.cpp:194 msgid "Revolve operation can only be applied to planar sketches." msgstr "" #: group.cpp:205 msgid "" "Bad selection for new revolve group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" #: group.cpp:217 msgctxt "group-name" msgid "revolve" msgstr "" #: group.cpp:222 msgid "Helix operation can only be applied to planar sketches." msgstr "" #: group.cpp:233 msgid "" "Bad selection for new helix group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" #: group.cpp:245 msgctxt "group-name" msgid "helix" msgstr "" #: group.cpp:258 msgid "" "Bad selection for new rotation. This group can be created with:\n" "\n" " * a point, while locked in workplane (rotate in plane, about that " "point)\n" " * a point and a line or a normal (rotate about an axis through the " "point, and parallel to line / normal)\n" msgstr "" "Mauvaise sélection pour une nouvelle rotation. Ce groupe peut être créé " "avec:\n" "\n" "    * Un point, lorsqu'il est verrouillé dans un plan de travail (rotation " "dans le plan, autour de ce point)\n" "    * Un point et une ligne ou une normale (tourner autour d'un axe par le " "point et parallèle à la ligne / normale)\n" #: group.cpp:271 msgctxt "group-name" msgid "rotate" msgstr "rotation" #: group.cpp:282 msgctxt "group-name" msgid "translate" msgstr "translation" #: group.cpp:400 msgid "(unnamed)" msgstr "(sans nom)" #: groupmesh.cpp:709 msgid "not closed contour, or not all same style!" msgstr "contour non fermé ou tout n'est pas du même style!" #: groupmesh.cpp:722 msgid "points not all coplanar!" msgstr "les points ne sont pas tous coplanaires!" #: groupmesh.cpp:724 msgid "contour is self-intersecting!" msgstr "le contour s'entrecroise!" #: groupmesh.cpp:726 msgid "zero-length edge!" msgstr "arête de longueur nulle!" #: modify.cpp:254 msgid "Must be sketching in workplane to create tangent arc." msgstr "Vous devez dessiner dans un plan pour créer un arc tangent." #: modify.cpp:301 msgid "" "To create a tangent arc, select a point where two non-construction lines or " "circles in this group and workplane join." msgstr "" "Pour créer un arc tangent, sélectionnez un point où deux lignes (pas de " "construction) ou cercles de ce groupe et de ce plan se joignent." #: modify.cpp:388 msgid "" "Couldn't round this corner. Try a smaller radius, or try creating the " "desired geometry by hand with tangency constraints." msgstr "" "Impossible d'arrondir ce coin. Essayez un rayon plus petit, ou essayez de " "créer la géométrie souhaitée à la main avec des contraintes tangentielles." #: modify.cpp:597 msgid "Couldn't split this entity; lines, circles, or cubics only." msgstr "" "Impossible de diviser cette entité; Lignes, cercles ou cubiques uniquement." #: modify.cpp:624 msgid "Must be sketching in workplane to split." msgstr "Vous devez dessiner dans un plan de travail pour diviser." #: modify.cpp:631 msgid "" "Select two entities that intersect each other (e.g. two lines/circles/arcs " "or a line/circle/arc and a point)." msgstr "" #: modify.cpp:736 msgid "Can't split; no intersection found." msgstr "Impossible de diviser; pas d'intersection trouvée." #: mouse.cpp:559 msgid "Assign to Style" msgstr "Appliquer au style" #: mouse.cpp:575 msgid "No Style" msgstr "Pas de style" #: mouse.cpp:578 msgid "Newly Created Custom Style..." msgstr "Style personnalisé nouvellement créé ..." #: mouse.cpp:585 msgid "Group Info" msgstr "Info Groupe" #: mouse.cpp:605 msgid "Style Info" msgstr "Info Style" #: mouse.cpp:625 msgid "Select Edge Chain" msgstr "Sélection Chaîne d'arêtes" #: mouse.cpp:631 msgid "Toggle Reference Dimension" msgstr "Basculer cote maîtresse / cote indicative" #: mouse.cpp:637 msgid "Other Supplementary Angle" msgstr "Autre angle supplémentaire" #: mouse.cpp:642 msgid "Snap to Grid" msgstr "Accrocher à la grille" #: mouse.cpp:651 msgid "Remove Spline Point" msgstr "Effacer le point de la Spline" #: mouse.cpp:686 msgid "Add Spline Point" msgstr "Ajouter un point à la Spline" #: mouse.cpp:690 msgid "Cannot add spline point: maximum number of points reached." msgstr "" "Impossible d'ajouter le point spline: nombre maximum de points atteints." #: mouse.cpp:715 msgid "Toggle Construction" msgstr "Basculer en mode \"construction\"." #: mouse.cpp:730 msgid "Delete Point-Coincident Constraint" msgstr "Effacer la contraint Point-Coïncident" #: mouse.cpp:749 msgid "Cut" msgstr "Couper" #: mouse.cpp:751 msgid "Copy" msgstr "Copier" #: mouse.cpp:755 msgid "Select All" msgstr "Sélectionner tout" #: mouse.cpp:760 msgid "Paste" msgstr "Coller" #: mouse.cpp:762 msgid "Paste Transformed..." msgstr "Coller transformé..." #: mouse.cpp:767 msgid "Delete" msgstr "Effacer" #: mouse.cpp:770 msgid "Unselect All" msgstr "Désélectionner tout" #: mouse.cpp:777 msgid "Unselect Hovered" msgstr "Désélectionner survolé" #: mouse.cpp:786 msgid "Zoom to Fit" msgstr "Zoom pour ajuster" #: mouse.cpp:988 mouse.cpp:1275 msgid "click next point of line, or press Esc" msgstr "cliquez pou le prochain point de ligne or appuyez sur Esc" #: mouse.cpp:994 msgid "" "Can't draw rectangle in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Impossible de dessiner un rectangle en 3d; D'abord, activez un plan de " "travail avec \"Dessin -> Dans plan de travail\"." #: mouse.cpp:1028 msgid "click to place other corner of rectangle" msgstr "cliquez pour placer un autre coin de rectangle" #: mouse.cpp:1048 msgid "click to set radius" msgstr "cliquez pour ajuster le rayon" #: mouse.cpp:1053 msgid "" "Can't draw arc in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Ne peut pas dessiner l'arc en 3d; D'abord, activez un plan de travail avec " "\"Dessin -> Dans plan de travail\"." #: mouse.cpp:1072 msgid "click to place point" msgstr "cliquez pour placer un point" #: mouse.cpp:1088 msgid "click next point of cubic, or press Esc" msgstr "cliquez le prochain point cubique ou appuyez sur Esc" #: mouse.cpp:1093 msgid "" "Sketching in a workplane already; sketch in 3d before creating new workplane." msgstr "" "Vous dessinez déjà dans un plan de travail; Sélectionner \"Dessiner en 3d\" " "avant de créer un nouveau plan de travail." #: mouse.cpp:1109 msgid "" "Can't draw text in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Impossible de dessiner du texte en 3d; D'abord, activer un plan de travail " "avec \"Dessin -> Dans plan de travail\"." #: mouse.cpp:1126 msgid "click to place bottom right of text" msgstr "" #: mouse.cpp:1132 msgid "" "Can't draw image in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Impossible de dessiner l'image en 3d; D'abord, activez un plan de travail " "avec \"Dessin -> Dans plan de travail\"." #: mouse.cpp:1159 msgid "NEW COMMENT -- DOUBLE-CLICK TO EDIT" msgstr "NOUVEAU COMMENTAIRE - DOUBLE-CLIQUE POUR EDITER" #: platform/gui.cpp:85 platform/gui.cpp:89 solvespace.cpp:511 msgctxt "file-type" msgid "SolveSpace models" msgstr "" #: platform/gui.cpp:90 msgctxt "file-type" msgid "IDF circuit board" msgstr "" #: platform/gui.cpp:94 msgctxt "file-type" msgid "PNG image" msgstr "" #: platform/gui.cpp:98 msgctxt "file-type" msgid "STL mesh" msgstr "" #: platform/gui.cpp:99 msgctxt "file-type" msgid "Wavefront OBJ mesh" msgstr "" #: platform/gui.cpp:100 msgctxt "file-type" msgid "Three.js-compatible mesh, with viewer" msgstr "" #: platform/gui.cpp:101 msgctxt "file-type" msgid "Three.js-compatible mesh, mesh only" msgstr "" #: platform/gui.cpp:102 msgctxt "file-type" msgid "VRML text file" msgstr "" #: platform/gui.cpp:106 platform/gui.cpp:113 platform/gui.cpp:120 msgctxt "file-type" msgid "STEP file" msgstr "" #: platform/gui.cpp:110 msgctxt "file-type" msgid "PDF file" msgstr "" #: platform/gui.cpp:111 msgctxt "file-type" msgid "Encapsulated PostScript" msgstr "" #: platform/gui.cpp:112 msgctxt "file-type" msgid "Scalable Vector Graphics" msgstr "" #: platform/gui.cpp:114 platform/gui.cpp:121 msgctxt "file-type" msgid "DXF file (AutoCAD 2007)" msgstr "" #: platform/gui.cpp:115 msgctxt "file-type" msgid "HPGL file" msgstr "" #: platform/gui.cpp:116 msgctxt "file-type" msgid "G Code" msgstr "" #: platform/gui.cpp:125 msgctxt "file-type" msgid "AutoCAD DXF and DWG files" msgstr "" #: platform/gui.cpp:129 msgctxt "file-type" msgid "Comma-separated values" msgstr "" #: platform/guigtk.cpp:1324 platform/guimac.mm:1363 platform/guiwin.cpp:1639 msgid "untitled" msgstr "sans nom" #: platform/guigtk.cpp:1335 platform/guigtk.cpp:1368 platform/guimac.mm:1321 #: platform/guiwin.cpp:1582 msgctxt "title" msgid "Save File" msgstr "Sauver fichier" #: platform/guigtk.cpp:1336 platform/guigtk.cpp:1369 platform/guimac.mm:1304 #: platform/guiwin.cpp:1584 msgctxt "title" msgid "Open File" msgstr "Ouvrir Fichier" #: platform/guigtk.cpp:1339 platform/guigtk.cpp:1375 msgctxt "button" msgid "_Cancel" msgstr "_Annuler" #: platform/guigtk.cpp:1340 platform/guigtk.cpp:1373 msgctxt "button" msgid "_Save" msgstr "_Sauver" #: platform/guigtk.cpp:1341 platform/guigtk.cpp:1374 msgctxt "button" msgid "_Open" msgstr "" #: solvespace.cpp:169 msgctxt "title" msgid "Autosave Available" msgstr "Sauvegarde automatique existante" #: solvespace.cpp:170 msgctxt "dialog" msgid "An autosave file is available for this sketch." msgstr "" #: solvespace.cpp:171 msgctxt "dialog" msgid "Do you want to load the autosave file instead?" msgstr "" #: solvespace.cpp:172 msgctxt "button" msgid "&Load autosave" msgstr "" #: solvespace.cpp:174 msgctxt "button" msgid "Do&n't Load" msgstr "" #: solvespace.cpp:557 msgctxt "title" msgid "Modified File" msgstr "Fichier modifié" #: solvespace.cpp:559 #, c-format msgctxt "dialog" msgid "Do you want to save the changes you made to the sketch “%s”?" msgstr "" #: solvespace.cpp:562 msgctxt "dialog" msgid "Do you want to save the changes you made to the new sketch?" msgstr "" #: solvespace.cpp:565 msgctxt "dialog" msgid "Your changes will be lost if you don't save them." msgstr "" #: solvespace.cpp:566 msgctxt "button" msgid "&Save" msgstr "" #: solvespace.cpp:568 msgctxt "button" msgid "Do&n't Save" msgstr "" #: solvespace.cpp:589 msgctxt "title" msgid "(new sketch)" msgstr "(nouveau dessin)" #: solvespace.cpp:596 msgctxt "title" msgid "Property Browser" msgstr "Navigateur de propriété" #: solvespace.cpp:658 msgid "" "Constraints are currently shown, and will be exported in the toolpath. This " "is probably not what you want; hide them by clicking the link at the top of " "the text window." msgstr "" #: solvespace.cpp:730 #, c-format msgid "" "Can't identify file type from file extension of filename '%s'; try .dxf or ." "dwg." msgstr "" #: solvespace.cpp:778 msgid "Constraint must have a label, and must not be a reference dimension." msgstr "" #: solvespace.cpp:782 msgid "Bad selection for step dimension; select a constraint." msgstr "" #: solvespace.cpp:806 msgid "The assembly does not interfere, good." msgstr "" #: solvespace.cpp:822 #, c-format msgid "" "The volume of the solid model is:\n" "\n" " %s" msgstr "" #: solvespace.cpp:831 #, c-format msgid "" "\n" "The volume of current group mesh is:\n" "\n" " %s" msgstr "" #: solvespace.cpp:836 msgid "" "\n" "\n" "Curved surfaces have been approximated as triangles.\n" "This introduces error, typically of around 1%." msgstr "" #: solvespace.cpp:851 #, c-format msgid "" "The surface area of the selected faces is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" #: solvespace.cpp:860 msgid "" "This group does not contain a correctly-formed 2d closed area. It is open, " "not coplanar, or self-intersecting." msgstr "" #: solvespace.cpp:872 #, c-format msgid "" "The area of the region sketched in this group is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" #: solvespace.cpp:892 #, c-format msgid "" "The total length of the selected entities is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" #: solvespace.cpp:898 msgid "Bad selection for perimeter; select line segments, arcs, and curves." msgstr "" #: solvespace.cpp:914 msgid "Bad selection for trace; select a single point." msgstr "" #: solvespace.cpp:941 #, c-format msgid "Couldn't write to '%s'" msgstr "" #: solvespace.cpp:971 msgid "The mesh is self-intersecting (NOT okay, invalid)." msgstr "" #: solvespace.cpp:972 msgid "The mesh is not self-intersecting (okay, valid)." msgstr "" #: solvespace.cpp:974 msgid "The mesh has naked edges (NOT okay, invalid)." msgstr "" #: solvespace.cpp:975 msgid "The mesh is watertight (okay, valid)." msgstr "" #: solvespace.cpp:978 #, c-format msgid "" "\n" "\n" "The model contains %d triangles, from %d surfaces." msgstr "" #: solvespace.cpp:982 #, c-format msgid "" "%s\n" "\n" "%s\n" "\n" "Zero problematic edges, good.%s" msgstr "" #: solvespace.cpp:985 #, c-format msgid "" "%s\n" "\n" "%s\n" "\n" "%d problematic edges, bad.%s" msgstr "" #: solvespace.cpp:998 #, c-format msgid "" "This is SolveSpace version %s.\n" "\n" "For more information, see http://solvespace.com/\n" "\n" "SolveSpace is free software: you are free to modify\n" "and/or redistribute it under the terms of the GNU\n" "General Public License (GPL) version 3 or later.\n" "\n" "There is NO WARRANTY, to the extent permitted by\n" "law. For details, visit http://gnu.org/licenses/\n" "\n" "© 2008-%d Jonathan Westhues and other authors.\n" msgstr "" #: style.cpp:166 msgid "" "Can't assign style to an entity that's derived from another entity; try " "assigning a style to this entity's parent." msgstr "" "Impossible d'attribuer le style à une entité dérivée d'une autre entité; " "Essayez d'attribuer un style au parent de cette entité." #: style.cpp:665 msgid "Style name cannot be empty" msgstr "Le nom d'un style ne peut pas être vide" #: textscreens.cpp:741 msgid "Can't repeat fewer than 1 time." msgstr "Je ne peux pas répéter moins de 1 fois." #: textscreens.cpp:745 msgid "Can't repeat more than 999 times." msgstr "Je ne peux pas répéter plus de 999 fois." #: textscreens.cpp:770 msgid "Group name cannot be empty" msgstr "Un nom de groupe ne peut pas être vide" #: textscreens.cpp:813 msgid "Opacity must be between zero and one." msgstr "L'opacité doit être entre 0 et 1." #: textscreens.cpp:848 msgid "Radius cannot be zero or negative." msgstr "Le rayon ne peut pas être zéro ou négatif." #: toolbar.cpp:18 msgid "Sketch line segment" msgstr "Dessin ligne - polyligne" #: toolbar.cpp:20 msgid "Sketch rectangle" msgstr "Dessin d'un rectangle" #: toolbar.cpp:22 msgid "Sketch circle" msgstr "Dessin d'un cercle" #: toolbar.cpp:24 msgid "Sketch arc of a circle" msgstr "Dessin d'un arc de cercle" #: toolbar.cpp:26 msgid "Sketch curves from text in a TrueType font" msgstr "Dessin de courbes depuis un texte en police TrueType" #: toolbar.cpp:28 msgid "Sketch image from a file" msgstr "Dessin d'une image depuis un fichier" #: toolbar.cpp:30 msgid "Create tangent arc at selected point" msgstr "Créer un arc tangent au point sélectionné" #: toolbar.cpp:32 msgid "Sketch cubic Bezier spline" msgstr "Dessin d'une spline cubique de Bezier" #: toolbar.cpp:34 msgid "Sketch datum point" msgstr "Dessin d'un point" #: toolbar.cpp:36 msgid "Toggle construction" msgstr "Basculer en mode \"construction\"" #: toolbar.cpp:38 msgid "Split lines / curves where they intersect" msgstr "Diviser lignes / courbes où elles se croisent" #: toolbar.cpp:42 msgid "Constrain distance / diameter / length" msgstr "Contraindre distance / diamètre / longueur" #: toolbar.cpp:44 msgid "Constrain angle" msgstr "Contraindre angle" #: toolbar.cpp:46 msgid "Constrain to be horizontal" msgstr "Contraindre à être horizontal" #: toolbar.cpp:48 msgid "Constrain to be vertical" msgstr "Contraindre à être vertical" #: toolbar.cpp:50 msgid "Constrain to be parallel or tangent" msgstr "Contraindre à être parallèle ou tangent" #: toolbar.cpp:52 msgid "Constrain to be perpendicular" msgstr "Contraindre à être perpendiculaire" #: toolbar.cpp:54 msgid "Constrain point on line / curve / plane / point" msgstr "Contraindre point sur ligne / courbe / plan / point" #: toolbar.cpp:56 msgid "Constrain symmetric" msgstr "Contrainte symétrique" #: toolbar.cpp:58 msgid "Constrain equal length / radius / angle" msgstr "Contrainte égale longueur / rayon / angle" #: toolbar.cpp:60 msgid "Constrain normals in same orientation" msgstr "Contrainte normales dans la même direction" #: toolbar.cpp:62 msgid "Other supplementary angle" msgstr "Autre angle supplémentaire" #: toolbar.cpp:64 msgid "Toggle reference dimension" msgstr "Basculer cote maîtresse / cote indicative" #: toolbar.cpp:68 msgid "New group extruding active sketch" msgstr "Nouveau groupe d'extrusion du dessin actif" #: toolbar.cpp:70 msgid "New group rotating active sketch" msgstr "Nouveau groupe de révolution du dessin actif" #: toolbar.cpp:72 msgid "New group helix from active sketch" msgstr "" #: toolbar.cpp:74 msgid "New group revolve active sketch" msgstr "" #: toolbar.cpp:76 msgid "New group step and repeat rotating" msgstr "Nouveau groupe de répétition circulaire" #: toolbar.cpp:78 msgid "New group step and repeat translating" msgstr "Nouveau groupe de répétition linéaire" #: toolbar.cpp:80 msgid "New group in new workplane (thru given entities)" msgstr "" "Nouveau groupe dans un nouveau plan de travail (Par des entités données)" #: toolbar.cpp:82 msgid "New group in 3d" msgstr "Nouveau groupe en 3d" #: toolbar.cpp:84 msgid "New group linking / assembling file" msgstr "Nouveau groupe lié / assemblage" #: toolbar.cpp:88 msgid "Nearest isometric view" msgstr "Vue isométrique la plus proche" #: toolbar.cpp:90 msgid "Align view to active workplane" msgstr "Aligner la vue sur le plan de travail actif" #: util.cpp:165 msgctxt "title" msgid "Error" msgstr "Erreur" #: util.cpp:165 msgctxt "title" msgid "Message" msgstr "Message" #: util.cpp:170 msgctxt "button" msgid "&OK" msgstr "" #: view.cpp:78 msgid "Scale cannot be zero or negative." msgstr "L'échelle ne peut pas être zéro ou négative." #: view.cpp:90 view.cpp:99 msgid "Bad format: specify x, y, z" msgstr "Mauvais format: Spécifiez x, y, z" #~ msgid "Specify between 0 and 8 digits after the decimal." #~ msgstr "Spécifiez entre 0 et 8 chiffres après la virgule." #~ msgid "Show Degrees of &Freedom" #~ msgstr "Montrer les Degrés de &Liberté" #~ msgid "click to place bottom left of text" #~ msgstr "cliquez pour placer le bas gauche du texte" #~ msgid "Do you want to save the changes you made to the new sketch?" #~ msgstr "" #~ "Voulez-vous enregistrer les modifications que vous avez apportées au " #~ "nouveau dessin?" #~ msgid "Your changes will be lost if you don't save them." #~ msgstr "Vos modifications seront perdues si vous ne les enregistrez pas." #~ msgctxt "button" #~ msgid "Save" #~ msgstr "Sauver" #~ msgctxt "button" #~ msgid "Cancel" #~ msgstr "Annuler" #~ msgctxt "button" #~ msgid "Don't Save" #~ msgstr "Ne pas sauver" #~ msgid "Do you want to load the autosave file instead?" #~ msgstr "Voulez-vous charger le fichier de sauvegarde à la place?" #~ msgctxt "button" #~ msgid "Load" #~ msgstr "Charger" #~ msgctxt "button" #~ msgid "Don't Load" #~ msgstr "Ne pas charger" #~ msgid "" #~ "Do you want to locate it manually?\n" #~ "If you select “No”, any geometry that depends on the missing file will be " #~ "removed." #~ msgstr "" #~ "Voulez-vous le localiser manuellement?\n" #~ "Si vous sélectionnez \"Non\", toute géométrie qui dépend du fichier " #~ "manquant sera supprimée." #~ msgctxt "button" #~ msgid "Yes" #~ msgstr "Oui" #~ msgctxt "button" #~ msgid "No" #~ msgstr "Non" #~ msgctxt "button" #~ msgid "OK" #~ msgstr "Valider" #~ msgid "_Cancel" #~ msgstr "_Annuler" #~ msgid "_Open" #~ msgstr "_Ouvrir" #~ msgid "" #~ "The file has changed since it was last saved.\n" #~ "\n" #~ "Do you want to save the changes?" #~ msgstr "" #~ "Le fichier a changé depuis sa dernière sauvegarde.\n" #~ "\n" #~ "Voulez-vous enregistrer les modifications?" #~ msgctxt "button" #~ msgid "Do_n't Save" #~ msgstr "_Ne pas sauver" #~ msgctxt "button" #~ msgid "_Load autosave" #~ msgstr "_Charger la sauvegarde automatique" #~ msgctxt "button" #~ msgid "Do_n't Load" #~ msgstr "_Ne pas charger" #~ msgctxt "button" #~ msgid "_Yes" #~ msgstr "_Oui" #~ msgctxt "button" #~ msgid "_No" #~ msgstr "_Non" #~ msgid "SolveSpace models" #~ msgstr "Modèles SolveSpace" #~ msgid "PNG file" #~ msgstr "Fichier PNG" #~ msgid "STL mesh" #~ msgstr "Maillage STL" #~ msgid "Wavefront OBJ mesh" #~ msgstr "Maillage Wavefront OBJ" #~ msgid "Three.js-compatible mesh, with viewer" #~ msgstr "Maillage Three-js-compatible, avec visualisateur" #~ msgid "Three.js-compatible mesh, mesh only" #~ msgstr "Maillage Three-js-compatible, maillage seul" #~ msgid "STEP file" #~ msgstr "Fichier STEP" #~ msgid "PDF file" #~ msgstr "Fichier PDF" #~ msgid "Encapsulated PostScript" #~ msgstr "Encapsulated PostScript" #~ msgid "Scalable Vector Graphics" #~ msgstr "Scalable Vector Graphics" #~ msgid "DXF file (AutoCAD 2007)" #~ msgstr "Fichier DXF (AutoCAD 2007)" #~ msgid "HPGL file" #~ msgstr "Fichier HPGL" #~ msgid "G Code" #~ msgstr "G Code" #~ msgid "AutoCAD DXF and DWG files" #~ msgstr "Fichiers AutoCAD DXF et DWG" #~ msgid "Comma-separated values" #~ msgstr "Valeurs CSV séparées par des virgules"