# English translations for SolveSpace package. # Copyright (C) 2017 the SolveSpace authors # This file is distributed under the same license as the SolveSpace package. # Automatically generated, 2017. # msgid "" msgstr "" "Project-Id-Version: SolveSpace 3.0\n" "Report-Msgid-Bugs-To: whitequark@whitequark.org\n" "POT-Creation-Date: 2021-09-26 16:25-0400\n" "PO-Revision-Date: 2017-01-05 10:30+0000\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" "Language: en_US\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: clipboard.cpp:309 msgid "" "Cut, paste, and copy work only in a workplane.\n" "\n" "Activate one with Sketch -> In Workplane." msgstr "" "Cut, paste, and copy work only in a workplane.\n" "\n" "Activate one with Sketch -> In Workplane." #: clipboard.cpp:326 msgid "Clipboard is empty; nothing to paste." msgstr "Clipboard is empty; nothing to paste." #: clipboard.cpp:373 msgid "Number of copies to paste must be at least one." msgstr "Number of copies to paste must be at least one." #: clipboard.cpp:389 textscreens.cpp:827 msgid "Scale cannot be zero." msgstr "Scale cannot be zero." #: clipboard.cpp:431 msgid "Select one point to define origin of rotation." msgstr "Select one point to define origin of rotation." #: clipboard.cpp:443 msgid "Select two points to define translation vector." msgstr "Select two points to define translation vector." #: clipboard.cpp:453 msgid "" "Transformation is identity. So all copies will be exactly on top of each " "other." msgstr "" "Transformation is identity. So all copies will be exactly on top of each " "other." #: clipboard.cpp:457 msgid "Too many items to paste; split this into smaller pastes." msgstr "Too many items to paste; split this into smaller pastes." #: clipboard.cpp:462 msgid "No workplane active." msgstr "No workplane active." #: confscreen.cpp:376 msgid "Bad format: specify coordinates as x, y, z" msgstr "Bad format: specify coordinates as x, y, z" #: confscreen.cpp:386 style.cpp:729 textscreens.cpp:858 msgid "Bad format: specify color as r, g, b" msgstr "Bad format: specify color as r, g, b" #: confscreen.cpp:412 msgid "" "The perspective factor will have no effect until you enable View -> Use " "Perspective Projection." msgstr "" "The perspective factor will have no effect until you enable View -> Use " "Perspective Projection." #: confscreen.cpp:430 confscreen.cpp:440 #, c-format msgid "Specify between 0 and %d digits after the decimal." msgstr "Specify between 0 and %d digits after the decimal." #: confscreen.cpp:452 msgid "Export scale must not be zero!" msgstr "Export scale must not be zero!" #: confscreen.cpp:464 msgid "Cutter radius offset must not be negative!" msgstr "Cutter radius offset must not be negative!" #: confscreen.cpp:518 msgid "Bad value: autosave interval should be positive" msgstr "Bad value: autosave interval should be positive" #: confscreen.cpp:521 msgid "Bad format: specify interval in integral minutes" msgstr "Bad format: specify interval in integral minutes" #: constraint.cpp:12 msgctxt "constr-name" msgid "pts-coincident" msgstr "pts-coincident" #: constraint.cpp:13 msgctxt "constr-name" msgid "pt-pt-distance" msgstr "pt-pt-distance" #: constraint.cpp:14 msgctxt "constr-name" msgid "pt-line-distance" msgstr "pt-line-distance" #: constraint.cpp:15 msgctxt "constr-name" msgid "pt-plane-distance" msgstr "pt-plane-distance" #: constraint.cpp:16 msgctxt "constr-name" msgid "pt-face-distance" msgstr "pt-face-distance" #: constraint.cpp:17 msgctxt "constr-name" msgid "proj-pt-pt-distance" msgstr "proj-pt-pt-distance" #: constraint.cpp:18 msgctxt "constr-name" msgid "pt-in-plane" msgstr "pt-in-plane" #: constraint.cpp:19 msgctxt "constr-name" msgid "pt-on-line" msgstr "pt-on-line" #: constraint.cpp:20 msgctxt "constr-name" msgid "pt-on-face" msgstr "pt-on-face" #: constraint.cpp:21 msgctxt "constr-name" msgid "eq-length" msgstr "eq-length" #: constraint.cpp:22 msgctxt "constr-name" msgid "eq-length-and-pt-ln-dist" msgstr "eq-length-and-pt-ln-dist" #: constraint.cpp:23 msgctxt "constr-name" msgid "eq-pt-line-distances" msgstr "eq-pt-line-distances" #: constraint.cpp:24 msgctxt "constr-name" msgid "length-ratio" msgstr "length-ratio" #: constraint.cpp:25 msgctxt "constr-name" msgid "arc-arc-length-ratio" msgstr "arc-arc-length-ratio" #: constraint.cpp:26 msgctxt "constr-name" msgid "arc-line-length-ratio" msgstr "arc-line-length-ratio" #: constraint.cpp:27 msgctxt "constr-name" msgid "length-difference" msgstr "length-difference" #: constraint.cpp:28 msgctxt "constr-name" msgid "arc-arc-len-difference" msgstr "arc-arc-len-difference" #: constraint.cpp:29 msgctxt "constr-name" msgid "arc-line-len-difference" msgstr "arc-line-len-difference" #: constraint.cpp:30 msgctxt "constr-name" msgid "symmetric" msgstr "symmetric" #: constraint.cpp:31 msgctxt "constr-name" msgid "symmetric-h" msgstr "symmetric-h" #: constraint.cpp:32 msgctxt "constr-name" msgid "symmetric-v" msgstr "symmetric-v" #: constraint.cpp:33 msgctxt "constr-name" msgid "symmetric-line" msgstr "symmetric-line" #: constraint.cpp:34 msgctxt "constr-name" msgid "at-midpoint" msgstr "at-midpoint" #: constraint.cpp:35 msgctxt "constr-name" msgid "horizontal" msgstr "horizontal" #: constraint.cpp:36 msgctxt "constr-name" msgid "vertical" msgstr "vertical" #: constraint.cpp:37 msgctxt "constr-name" msgid "diameter" msgstr "diameter" #: constraint.cpp:38 msgctxt "constr-name" msgid "pt-on-circle" msgstr "pt-on-circle" #: constraint.cpp:39 msgctxt "constr-name" msgid "same-orientation" msgstr "same-orientation" #: constraint.cpp:40 msgctxt "constr-name" msgid "angle" msgstr "angle" #: constraint.cpp:41 msgctxt "constr-name" msgid "parallel" msgstr "parallel" #: constraint.cpp:42 msgctxt "constr-name" msgid "arc-line-tangent" msgstr "arc-line-tangent" #: constraint.cpp:43 msgctxt "constr-name" msgid "cubic-line-tangent" msgstr "cubic-line-tangent" #: constraint.cpp:44 msgctxt "constr-name" msgid "curve-curve-tangent" msgstr "curve-curve-tangent" #: constraint.cpp:45 msgctxt "constr-name" msgid "perpendicular" msgstr "perpendicular" #: constraint.cpp:46 msgctxt "constr-name" msgid "eq-radius" msgstr "eq-radius" #: constraint.cpp:47 msgctxt "constr-name" msgid "eq-angle" msgstr "eq-angle" #: constraint.cpp:48 msgctxt "constr-name" msgid "eq-line-len-arc-len" msgstr "eq-line-len-arc-len" #: constraint.cpp:49 msgctxt "constr-name" msgid "lock-where-dragged" msgstr "lock-where-dragged" #: constraint.cpp:50 msgctxt "constr-name" msgid "comment" msgstr "comment" #: constraint.cpp:144 msgid "" "The tangent arc and line segment must share an endpoint. Constrain them with " "Constrain -> On Point before constraining tangent." msgstr "" "The tangent arc and line segment must share an endpoint. Constrain them with " "Constrain -> On Point before constraining tangent." #: constraint.cpp:163 msgid "" "The tangent cubic and line segment must share an endpoint. Constrain them " "with Constrain -> On Point before constraining tangent." msgstr "" "The tangent cubic and line segment must share an endpoint. Constrain them " "with Constrain -> On Point before constraining tangent." #: constraint.cpp:189 msgid "" "The curves must share an endpoint. Constrain them with Constrain -> On Point " "before constraining tangent." msgstr "" "The curves must share an endpoint. Constrain them with Constrain -> On Point " "before constraining tangent." #: constraint.cpp:238 msgid "" "Bad selection for distance / diameter constraint. This constraint can apply " "to:\n" "\n" " * two points (distance between points)\n" " * a line segment (length)\n" " * two points and a line segment or normal (projected distance)\n" " * a workplane and a point (minimum distance)\n" " * a line segment and a point (minimum distance)\n" " * a plane face and a point (minimum distance)\n" " * a circle or an arc (diameter)\n" msgstr "" "Bad selection for distance / diameter constraint. This constraint can apply " "to:\n" "\n" " * two points (distance between points)\n" " * a line segment (length)\n" " * two points and a line segment or normal (projected distance)\n" " * a workplane and a point (minimum distance)\n" " * a line segment and a point (minimum distance)\n" " * a plane face and a point (minimum distance)\n" " * a circle or an arc (diameter)\n" #: constraint.cpp:291 msgid "" "Bad selection for on point / curve / plane constraint. This constraint can " "apply to:\n" "\n" " * two points (points coincident)\n" " * a point and a workplane (point in plane)\n" " * a point and a line segment (point on line)\n" " * a point and a circle or arc (point on curve)\n" " * a point and a plane face (point on face)\n" msgstr "" "Bad selection for on point / curve / plane constraint. This constraint can " "apply to:\n" "\n" " * two points (points coincident)\n" " * a point and a workplane (point in plane)\n" " * a point and a line segment (point on line)\n" " * a point and a circle or arc (point on curve)\n" " * a point and a plane face (point on face)\n" #: constraint.cpp:353 msgid "" "Bad selection for equal length / radius constraint. This constraint can " "apply to:\n" "\n" " * two line segments (equal length)\n" " * two line segments and two points (equal point-line distances)\n" " * a line segment and two points (equal point-line distances)\n" " * a line segment, and a point and line segment (point-line distance " "equals length)\n" " * four line segments or normals (equal angle between A,B and C,D)\n" " * three line segments or normals (equal angle between A,B and B,C)\n" " * two circles or arcs (equal radius)\n" " * a line segment and an arc (line segment length equals arc length)\n" msgstr "" "Bad selection for equal length / radius constraint. This constraint can " "apply to:\n" "\n" " * two line segments (equal length)\n" " * two line segments and two points (equal point-line distances)\n" " * a line segment and two points (equal point-line distances)\n" " * a line segment, and a point and line segment (point-line distance " "equals length)\n" " * four line segments or normals (equal angle between A,B and C,D)\n" " * three line segments or normals (equal angle between A,B and B,C)\n" " * two circles or arcs (equal radius)\n" " * a line segment and an arc (line segment length equals arc length)\n" #: constraint.cpp:407 msgid "" "Bad selection for length ratio constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * two arcs\n" " * one arc and one line segment\n" msgstr "" "Bad selection for length ratio constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * two arcs\n" " * one arc and one line segment\n" #: constraint.cpp:441 msgid "" "Bad selection for length difference constraint. This constraint can apply " "to:\n" "\n" " * two line segments\n" " * two arcs\n" " * one arc and one line segment\n" msgstr "" "Bad selection for length difference constraint. This constraint can apply " "to:\n" "\n" " * two line segments\n" " * two arcs\n" " * one arc and one line segment\n" #: constraint.cpp:472 msgid "" "Bad selection for at midpoint constraint. This constraint can apply to:\n" "\n" " * a line segment and a point (point at midpoint)\n" " * a line segment and a workplane (line's midpoint on plane)\n" msgstr "" "Bad selection for at midpoint constraint. This constraint can apply to:\n" "\n" " * a line segment and a point (point at midpoint)\n" " * a line segment and a workplane (line's midpoint on plane)\n" #: constraint.cpp:530 msgid "" "Bad selection for symmetric constraint. This constraint can apply to:\n" "\n" " * two points or a line segment (symmetric about workplane's coordinate " "axis)\n" " * line segment, and two points or a line segment (symmetric about line " "segment)\n" " * workplane, and two points or a line segment (symmetric about " "workplane)\n" msgstr "" "Bad selection for symmetric constraint. This constraint can apply to:\n" "\n" " * two points or a line segment (symmetric about workplane's coordinate " "axis)\n" " * line segment, and two points or a line segment (symmetric about line " "segment)\n" " * workplane, and two points or a line segment (symmetric about " "workplane)\n" #: constraint.cpp:545 msgid "" "A workplane must be active when constraining symmetric without an explicit " "symmetry plane." msgstr "" "A workplane must be active when constraining symmetric without an explicit " "symmetry plane." #: constraint.cpp:579 msgid "" "Activate a workplane (with Sketch -> In Workplane) before applying a " "horizontal or vertical constraint." msgstr "" "Activate a workplane (with Sketch -> In Workplane) before applying a " "horizontal or vertical constraint." #: constraint.cpp:592 msgid "" "Bad selection for horizontal / vertical constraint. This constraint can " "apply to:\n" "\n" " * two points\n" " * a line segment\n" msgstr "" "Bad selection for horizontal / vertical constraint. This constraint can " "apply to:\n" "\n" " * two points\n" " * a line segment\n" #: constraint.cpp:613 msgid "" "Bad selection for same orientation constraint. This constraint can apply " "to:\n" "\n" " * two normals\n" msgstr "" "Bad selection for same orientation constraint. This constraint can apply " "to:\n" "\n" " * two normals\n" #: constraint.cpp:663 msgid "Must select an angle constraint." msgstr "Must select an angle constraint." #: constraint.cpp:676 msgid "Must select a constraint with associated label." msgstr "Must select a constraint with associated label." #: constraint.cpp:687 msgid "" "Bad selection for angle constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" msgstr "" "Bad selection for angle constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" #: constraint.cpp:754 msgid "Curve-curve tangency must apply in workplane." msgstr "Curve-curve tangency must apply in workplane." #: constraint.cpp:766 msgid "" "Bad selection for parallel / tangent constraint. This constraint can apply " "to:\n" "\n" " * two line segments (parallel)\n" " * a line segment and a normal (parallel)\n" " * two normals (parallel)\n" " * two line segments, arcs, or beziers, that share an endpoint (tangent)\n" msgstr "" "Bad selection for parallel / tangent constraint. This constraint can apply " "to:\n" "\n" " * two line segments (parallel)\n" " * a line segment and a normal (parallel)\n" " * two normals (parallel)\n" " * two line segments, arcs, or beziers, that share an endpoint (tangent)\n" #: constraint.cpp:784 msgid "" "Bad selection for perpendicular constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" msgstr "" "Bad selection for perpendicular constraint. This constraint can apply to:\n" "\n" " * two line segments\n" " * a line segment and a normal\n" " * two normals\n" #: constraint.cpp:799 msgid "" "Bad selection for lock point where dragged constraint. This constraint can " "apply to:\n" "\n" " * a point\n" msgstr "" "Bad selection for lock point where dragged constraint. This constraint can " "apply to:\n" "\n" " * a point\n" #: constraint.cpp:813 mouse.cpp:1158 msgid "NEW COMMENT -- DOUBLE-CLICK TO EDIT" msgstr "NEW COMMENT -- DOUBLE-CLICK TO EDIT" #: constraint.cpp:818 msgid "click center of comment text" msgstr "click center of comment text" #: export.cpp:19 msgid "" "No solid model present; draw one with extrudes and revolves, or use Export " "2d View to export bare lines and curves." msgstr "" "No solid model present; draw one with extrudes and revolves, or use Export " "2d View to export bare lines and curves." #: export.cpp:61 msgid "" "Bad selection for export section. Please select:\n" "\n" " * nothing, with an active workplane (workplane is section plane)\n" " * a face (section plane through face)\n" " * a point and two line segments (plane through point and parallel to " "lines)\n" msgstr "" "Bad selection for export section. Please select:\n" "\n" " * nothing, with an active workplane (workplane is section plane)\n" " * a face (section plane through face)\n" " * a point and two line segments (plane through point and parallel to " "lines)\n" #: export.cpp:818 msgid "Active group mesh is empty; nothing to export." msgstr "Active group mesh is empty; nothing to export." #: exportvector.cpp:336 msgid "freehand lines were replaced with continuous lines" msgstr "freehand lines were replaced with continuous lines" #: exportvector.cpp:338 msgid "zigzag lines were replaced with continuous lines" msgstr "zigzag lines were replaced with continuous lines" #: exportvector.cpp:592 msgid "" "Some aspects of the drawing have no DXF equivalent and were not exported:\n" msgstr "" "Some aspects of the drawing have no DXF equivalent and were not exported:\n" #: exportvector.cpp:838 msgid "" "PDF page size exceeds 200 by 200 inches; many viewers may reject this file." msgstr "" "PDF page size exceeds 200 by 200 inches; many viewers may reject this file." #: file.cpp:44 group.cpp:91 msgctxt "group-name" msgid "sketch-in-plane" msgstr "sketch-in-plane" #: file.cpp:62 msgctxt "group-name" msgid "#references" msgstr "#references" #: file.cpp:550 msgid "The file is empty. It may be corrupt." msgstr "The file is empty. It may be corrupt." #: file.cpp:555 msgid "" "Unrecognized data in file. This file may be corrupt, or from a newer version " "of the program." msgstr "" "Unrecognized data in file. This file may be corrupt, or from a newer version " "of the program." #: file.cpp:867 msgctxt "title" msgid "Missing File" msgstr "Missing File" #: file.cpp:868 #, c-format msgctxt "dialog" msgid "The linked file “%s” is not present." msgstr "The linked file “%s” is not present." #: file.cpp:870 msgctxt "dialog" msgid "" "Do you want to locate it manually?\n" "\n" "If you decline, any geometry that depends on the missing file will be " "permanently removed." msgstr "" "Do you want to locate it manually?\n" "\n" "If you decline, any geometry that depends on the missing file will be " "permanently removed." #: file.cpp:873 msgctxt "button" msgid "&Yes" msgstr "&Yes" #: file.cpp:875 msgctxt "button" msgid "&No" msgstr "&No" #: file.cpp:877 solvespace.cpp:610 msgctxt "button" msgid "&Cancel" msgstr "&Cancel" #: graphicswin.cpp:41 msgid "&File" msgstr "&File" #: graphicswin.cpp:42 msgid "&New" msgstr "&New" #: graphicswin.cpp:43 msgid "&Open..." msgstr "&Open..." #: graphicswin.cpp:44 msgid "Open &Recent" msgstr "Open &Recent" #: graphicswin.cpp:45 msgid "&Save" msgstr "&Save" #: graphicswin.cpp:46 msgid "Save &As..." msgstr "Save &As..." #: graphicswin.cpp:48 msgid "Export &Image..." msgstr "Export &Image..." #: graphicswin.cpp:49 msgid "Export 2d &View..." msgstr "Export 2d &View..." #: graphicswin.cpp:50 msgid "Export 2d &Section..." msgstr "Export 2d &Section..." #: graphicswin.cpp:51 msgid "Export 3d &Wireframe..." msgstr "Export 3d &Wireframe..." #: graphicswin.cpp:52 msgid "Export Triangle &Mesh..." msgstr "Export Triangle &Mesh..." #: graphicswin.cpp:53 msgid "Export &Surfaces..." msgstr "Export &Surfaces..." #: graphicswin.cpp:54 msgid "Im&port..." msgstr "Im&port..." #: graphicswin.cpp:57 msgid "E&xit" msgstr "E&xit" #: graphicswin.cpp:60 msgid "&Edit" msgstr "&Edit" #: graphicswin.cpp:61 msgid "&Undo" msgstr "&Undo" #: graphicswin.cpp:62 msgid "&Redo" msgstr "&Redo" #: graphicswin.cpp:63 msgid "Re&generate All" msgstr "Re&generate All" #: graphicswin.cpp:65 msgid "Snap Selection to &Grid" msgstr "Snap Selection to &Grid" #: graphicswin.cpp:66 msgid "Rotate Imported &90°" msgstr "Rotate Imported &90°" #: graphicswin.cpp:68 msgid "Cu&t" msgstr "Cu&t" #: graphicswin.cpp:69 msgid "&Copy" msgstr "&Copy" #: graphicswin.cpp:70 msgid "&Paste" msgstr "&Paste" #: graphicswin.cpp:71 msgid "Paste &Transformed..." msgstr "Paste &Transformed..." #: graphicswin.cpp:72 msgid "&Delete" msgstr "&Delete" #: graphicswin.cpp:74 msgid "Select &Edge Chain" msgstr "Select &Edge Chain" #: graphicswin.cpp:75 msgid "Select &All" msgstr "Select &All" #: graphicswin.cpp:76 msgid "&Unselect All" msgstr "&Unselect All" #: graphicswin.cpp:78 msgid "&Line Styles..." msgstr "&Line Styles..." #: graphicswin.cpp:79 msgid "&View Projection..." msgstr "&View Projection..." #: graphicswin.cpp:81 msgid "Con&figuration..." msgstr "Con&figuration..." #: graphicswin.cpp:84 msgid "&View" msgstr "&View" #: graphicswin.cpp:85 msgid "Zoom &In" msgstr "Zoom &In" #: graphicswin.cpp:86 msgid "Zoom &Out" msgstr "Zoom &Out" #: graphicswin.cpp:87 msgid "Zoom To &Fit" msgstr "Zoom To &Fit" #: graphicswin.cpp:89 msgid "Align View to &Workplane" msgstr "Align View to &Workplane" #: graphicswin.cpp:90 msgid "Nearest &Ortho View" msgstr "Nearest &Ortho View" #: graphicswin.cpp:91 msgid "Nearest &Isometric View" msgstr "Nearest &Isometric View" #: graphicswin.cpp:92 msgid "&Center View At Point" msgstr "&Center View At Point" #: graphicswin.cpp:94 msgid "Show Snap &Grid" msgstr "Show Snap &Grid" #: graphicswin.cpp:95 msgid "Darken Inactive Solids" msgstr "Darken Inactive Solids" #: graphicswin.cpp:96 msgid "Use &Perspective Projection" msgstr "Use &Perspective Projection" #: graphicswin.cpp:97 msgid "Show E&xploded View" msgstr "Show E&xploded View" #: graphicswin.cpp:98 msgid "Dimension &Units" msgstr "Dimension &Units" #: graphicswin.cpp:99 msgid "Dimensions in &Millimeters" msgstr "Dimensions in &Millimeters" #: graphicswin.cpp:100 msgid "Dimensions in M&eters" msgstr "Dimensions in M&eters" #: graphicswin.cpp:101 msgid "Dimensions in &Inches" msgstr "Dimensions in &Inches" #: graphicswin.cpp:102 msgid "Dimensions in &Feet and Inches" msgstr "Dimensions in &Feet and Inches" #: graphicswin.cpp:104 msgid "Show &Toolbar" msgstr "Show &Toolbar" #: graphicswin.cpp:105 msgid "Show Property Bro&wser" msgstr "Show Property Bro&wser" #: graphicswin.cpp:107 msgid "&Full Screen" msgstr "&Full Screen" #: graphicswin.cpp:109 msgid "&New Group" msgstr "&New Group" #: graphicswin.cpp:110 msgid "Sketch In &3d" msgstr "Sketch In &3d" #: graphicswin.cpp:111 msgid "Sketch In New &Workplane" msgstr "Sketch In New &Workplane" #: graphicswin.cpp:113 msgid "Step &Translating" msgstr "Step &Translating" #: graphicswin.cpp:114 msgid "Step &Rotating" msgstr "Step &Rotating" #: graphicswin.cpp:116 msgid "E&xtrude" msgstr "E&xtrude" #: graphicswin.cpp:117 msgid "&Helix" msgstr "&Helix" #: graphicswin.cpp:118 msgid "&Lathe" msgstr "&Lathe" #: graphicswin.cpp:119 msgid "Re&volve" msgstr "Re&volve" #: graphicswin.cpp:121 msgid "Link / Assemble..." msgstr "Link / Assemble..." #: graphicswin.cpp:122 msgid "Link Recent" msgstr "Link Recent" #: graphicswin.cpp:124 msgid "&Sketch" msgstr "&Sketch" #: graphicswin.cpp:125 msgid "In &Workplane" msgstr "In &Workplane" #: graphicswin.cpp:126 msgid "Anywhere In &3d" msgstr "Anywhere In &3d" #: graphicswin.cpp:128 msgid "Datum &Point" msgstr "Datum &Point" #: graphicswin.cpp:129 msgid "&Workplane" msgstr "&Workplane" #: graphicswin.cpp:131 msgid "Line &Segment" msgstr "Line &Segment" #: graphicswin.cpp:132 msgid "C&onstruction Line Segment" msgstr "C&onstruction Line Segment" #: graphicswin.cpp:133 msgid "&Rectangle" msgstr "&Rectangle" #: graphicswin.cpp:134 msgid "&Circle" msgstr "&Circle" #: graphicswin.cpp:135 msgid "&Arc of a Circle" msgstr "&Arc of a Circle" #: graphicswin.cpp:136 msgid "&Bezier Cubic Spline" msgstr "&Bezier Cubic Spline" #: graphicswin.cpp:138 msgid "&Text in TrueType Font" msgstr "&Text in TrueType Font" #: graphicswin.cpp:139 msgid "&Image" msgstr "&Image" #: graphicswin.cpp:141 msgid "To&ggle Construction" msgstr "To&ggle Construction" #: graphicswin.cpp:142 msgid "Tangent &Arc at Point" msgstr "Tangent &Arc at Point" #: graphicswin.cpp:143 msgid "Split Curves at &Intersection" msgstr "Split Curves at &Intersection" #: graphicswin.cpp:145 msgid "&Constrain" msgstr "&Constrain" #: graphicswin.cpp:146 msgid "&Distance / Diameter" msgstr "&Distance / Diameter" #: graphicswin.cpp:147 msgid "Re&ference Dimension" msgstr "Re&ference Dimension" #: graphicswin.cpp:148 msgid "A&ngle" msgstr "A&ngle" #: graphicswin.cpp:149 msgid "Reference An&gle" msgstr "Reference An&gle" #: graphicswin.cpp:150 msgid "Other S&upplementary Angle" msgstr "Other S&upplementary Angle" #: graphicswin.cpp:151 msgid "Toggle R&eference Dim" msgstr "Toggle R&eference Dim" #: graphicswin.cpp:153 msgid "&Horizontal" msgstr "&Horizontal" #: graphicswin.cpp:154 msgid "&Vertical" msgstr "&Vertical" #: graphicswin.cpp:156 msgid "&On Point / Curve / Plane" msgstr "&On Point / Curve / Plane" #: graphicswin.cpp:157 msgid "E&qual Length / Radius / Angle" msgstr "E&qual Length / Radius / Angle" #: graphicswin.cpp:158 msgid "Length / Arc Ra&tio" msgstr "Length / Arc Ra&tio" #: graphicswin.cpp:159 msgid "Length / Arc Diff&erence" msgstr "Length / Arc Diff&erence" #: graphicswin.cpp:160 msgid "At &Midpoint" msgstr "At &Midpoint" #: graphicswin.cpp:161 msgid "S&ymmetric" msgstr "S&ymmetric" #: graphicswin.cpp:162 msgid "Para&llel / Tangent" msgstr "Para&llel / Tangent" #: graphicswin.cpp:163 msgid "&Perpendicular" msgstr "&Perpendicular" #: graphicswin.cpp:164 msgid "Same Orient&ation" msgstr "Same Orient&ation" #: graphicswin.cpp:165 msgid "Lock Point Where &Dragged" msgstr "Lock Point Where &Dragged" #: graphicswin.cpp:167 msgid "Comment" msgstr "Comment" #: graphicswin.cpp:169 msgid "&Analyze" msgstr "&Analyze" #: graphicswin.cpp:170 msgid "Measure &Volume" msgstr "Measure &Volume" #: graphicswin.cpp:171 msgid "Measure A&rea" msgstr "Measure A&rea" #: graphicswin.cpp:172 msgid "Measure &Perimeter" msgstr "Measure &Perimeter" #: graphicswin.cpp:173 msgid "Show &Interfering Parts" msgstr "Show &Interfering Parts" #: graphicswin.cpp:174 msgid "Show &Naked Edges" msgstr "Show &Naked Edges" #: graphicswin.cpp:175 msgid "Show &Center of Mass" msgstr "Show &Center of Mass" #: graphicswin.cpp:177 msgid "Show &Underconstrained Points" msgstr "Show &Underconstrained Points" #: graphicswin.cpp:179 msgid "&Trace Point" msgstr "&Trace Point" #: graphicswin.cpp:180 msgid "&Stop Tracing..." msgstr "&Stop Tracing..." #: graphicswin.cpp:181 msgid "Step &Dimension..." msgstr "Step &Dimension..." #: graphicswin.cpp:183 msgid "&Help" msgstr "&Help" #: graphicswin.cpp:184 msgid "&Language" msgstr "&Language" #: graphicswin.cpp:185 msgid "&Website / Manual" msgstr "&Website / Manual" #: graphicswin.cpp:187 msgid "&About" msgstr "&About" #: graphicswin.cpp:361 msgid "(no recent files)" msgstr "(no recent files)" #: graphicswin.cpp:369 #, c-format msgid "File '%s' does not exist." msgstr "File '%s' does not exist." #: graphicswin.cpp:736 msgid "No workplane is active, so the grid will not appear." msgstr "No workplane is active, so the grid will not appear." #: graphicswin.cpp:751 msgid "" "The perspective factor is set to zero, so the view will always be a parallel " "projection.\n" "\n" "For a perspective projection, modify the perspective factor in the " "configuration screen. A value around 0.3 is typical." msgstr "" "The perspective factor is set to zero, so the view will always be a parallel " "projection.\n" "\n" "For a perspective projection, modify the perspective factor in the " "configuration screen. A value around 0.3 is typical." #: graphicswin.cpp:836 msgid "" "Select a point; this point will become the center of the view on screen." msgstr "" "Select a point; this point will become the center of the view on screen." #: graphicswin.cpp:1136 msgid "No additional entities share endpoints with the selected entities." msgstr "No additional entities share endpoints with the selected entities." #: graphicswin.cpp:1154 msgid "" "To use this command, select a point or other entity from an linked part, or " "make a link group the active group." msgstr "" "To use this command, select a point or other entity from an linked part, or " "make a link group the active group." #: graphicswin.cpp:1177 msgid "" "No workplane is active. Activate a workplane (with Sketch -> In Workplane) " "to define the plane for the snap grid." msgstr "" "No workplane is active. Activate a workplane (with Sketch -> In Workplane) " "to define the plane for the snap grid." #: graphicswin.cpp:1184 msgid "" "Can't snap these items to grid; select points, text comments, or constraints " "with a label. To snap a line, select its endpoints." msgstr "" "Can't snap these items to grid; select points, text comments, or constraints " "with a label. To snap a line, select its endpoints." #: graphicswin.cpp:1269 msgid "No workplane selected. Activating default workplane for this group." msgstr "No workplane selected. Activating default workplane for this group." #: graphicswin.cpp:1272 msgid "" "No workplane is selected, and the active group does not have a default " "workplane. Try selecting a workplane, or activating a sketch-in-new-" "workplane group." msgstr "" "No workplane is selected, and the active group does not have a default " "workplane. Try selecting a workplane, or activating a sketch-in-new-" "workplane group." #: graphicswin.cpp:1293 msgid "" "Bad selection for tangent arc at point. Select a single point, or select " "nothing to set up arc parameters." msgstr "" "Bad selection for tangent arc at point. Select a single point, or select " "nothing to set up arc parameters." #: graphicswin.cpp:1304 msgid "click point on arc (draws anti-clockwise)" msgstr "click point on arc (draws anti-clockwise)" #: graphicswin.cpp:1305 msgid "click to place datum point" msgstr "click to place datum point" #: graphicswin.cpp:1306 msgid "click first point of line segment" msgstr "click first point of line segment" #: graphicswin.cpp:1308 msgid "click first point of construction line segment" msgstr "click first point of construction line segment" #: graphicswin.cpp:1309 msgid "click first point of cubic segment" msgstr "click first point of cubic segment" #: graphicswin.cpp:1310 msgid "click center of circle" msgstr "click center of circle" #: graphicswin.cpp:1311 msgid "click origin of workplane" msgstr "click origin of workplane" #: graphicswin.cpp:1312 msgid "click one corner of rectangle" msgstr "click one corner of rectangle" #: graphicswin.cpp:1313 msgid "click top left of text" msgstr "click top left of text" #: graphicswin.cpp:1319 msgid "click top left of image" msgstr "click top left of image" #: graphicswin.cpp:1345 msgid "" "No entities are selected. Select entities before trying to toggle their " "construction state." msgstr "" "No entities are selected. Select entities before trying to toggle their " "construction state." #: group.cpp:86 msgctxt "group-name" msgid "sketch-in-3d" msgstr "sketch-in-3d" #: group.cpp:150 msgid "" "Bad selection for new sketch in workplane. This group can be created with:\n" "\n" " * a point (through the point, orthogonal to coordinate axes)\n" " * a point and two line segments (through the point, parallel to the " "lines)\n" " * a point and a normal (through the point, orthogonal to the normal)\n" " * a workplane (copy of the workplane)\n" msgstr "" "Bad selection for new sketch in workplane. This group can be created with:\n" "\n" " * a point (through the point, orthogonal to coordinate axes)\n" " * a point and two line segments (through the point, parallel to the " "lines)\n" " * a point and a normal (through the point, orthogonal to the normal)\n" " * a workplane (copy of the workplane)\n" #: group.cpp:166 msgid "" "Activate a workplane (Sketch -> In Workplane) before extruding. The sketch " "will be extruded normal to the workplane." msgstr "" "Activate a workplane (Sketch -> In Workplane) before extruding. The sketch " "will be extruded normal to the workplane." #: group.cpp:175 msgctxt "group-name" msgid "extrude" msgstr "extrude" #: group.cpp:180 msgid "Lathe operation can only be applied to planar sketches." msgstr "Lathe operation can only be applied to planar sketches." #: group.cpp:191 msgid "" "Bad selection for new lathe group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" "Bad selection for new lathe group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" #: group.cpp:201 msgctxt "group-name" msgid "lathe" msgstr "lathe" #: group.cpp:206 msgid "Revolve operation can only be applied to planar sketches." msgstr "Revolve operation can only be applied to planar sketches." #: group.cpp:217 msgid "" "Bad selection for new revolve group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" "Bad selection for new revolve group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" #: group.cpp:229 msgctxt "group-name" msgid "revolve" msgstr "revolve" #: group.cpp:234 msgid "Helix operation can only be applied to planar sketches." msgstr "Helix operation can only be applied to planar sketches." #: group.cpp:245 msgid "" "Bad selection for new helix group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" msgstr "" "Bad selection for new helix group. This group can be created with:\n" "\n" " * a point and a line segment or normal (revolved about an axis parallel " "to line / normal, through point)\n" " * a line segment (revolved about line segment)\n" #: group.cpp:257 msgctxt "group-name" msgid "helix" msgstr "helix" #: group.cpp:270 msgid "" "Bad selection for new rotation. This group can be created with:\n" "\n" " * a point, while locked in workplane (rotate in plane, about that " "point)\n" " * a point and a line or a normal (rotate about an axis through the " "point, and parallel to line / normal)\n" msgstr "" "Bad selection for new rotation. This group can be created with:\n" "\n" " * a point, while locked in workplane (rotate in plane, about that " "point)\n" " * a point and a line or a normal (rotate about an axis through the " "point, and parallel to line / normal)\n" #: group.cpp:283 msgctxt "group-name" msgid "rotate" msgstr "rotate" #: group.cpp:294 msgctxt "group-name" msgid "translate" msgstr "translate" #: group.cpp:416 msgid "(unnamed)" msgstr "(unnamed)" #: groupmesh.cpp:707 msgid "not closed contour, or not all same style!" msgstr "not closed contour, or not all same style!" #: groupmesh.cpp:720 msgid "points not all coplanar!" msgstr "points not all coplanar!" #: groupmesh.cpp:722 msgid "contour is self-intersecting!" msgstr "contour is self-intersecting!" #: groupmesh.cpp:724 msgid "zero-length edge!" msgstr "zero-length edge!" #: modify.cpp:252 msgid "Must be sketching in workplane to create tangent arc." msgstr "Must be sketching in workplane to create tangent arc." #: modify.cpp:299 msgid "" "To create a tangent arc, select a point where two non-construction lines or " "circles in this group and workplane join." msgstr "" "To create a tangent arc, select a point where two non-construction lines or " "circles in this group and workplane join." #: modify.cpp:386 msgid "" "Couldn't round this corner. Try a smaller radius, or try creating the " "desired geometry by hand with tangency constraints." msgstr "" "Couldn't round this corner. Try a smaller radius, or try creating the " "desired geometry by hand with tangency constraints." #: modify.cpp:595 msgid "Couldn't split this entity; lines, circles, or cubics only." msgstr "Couldn't split this entity; lines, circles, or cubics only." #: modify.cpp:622 msgid "Must be sketching in workplane to split." msgstr "Must be sketching in workplane to split." #: modify.cpp:629 msgid "" "Select two entities that intersect each other (e.g. two lines/circles/arcs " "or a line/circle/arc and a point)." msgstr "" "Select two entities that intersect each other (e.g. two lines/circles/arcs " "or a line/circle/arc and a point)." #: modify.cpp:734 msgid "Can't split; no intersection found." msgstr "Can't split; no intersection found." #: mouse.cpp:557 msgid "Assign to Style" msgstr "Assign to Style" #: mouse.cpp:573 msgid "No Style" msgstr "No Style" #: mouse.cpp:576 msgid "Newly Created Custom Style..." msgstr "Newly Created Custom Style..." #: mouse.cpp:583 msgid "Group Info" msgstr "Group Info" #: mouse.cpp:603 msgid "Style Info" msgstr "Style Info" #: mouse.cpp:623 msgid "Select Edge Chain" msgstr "Select Edge Chain" #: mouse.cpp:629 msgid "Toggle Reference Dimension" msgstr "Toggle Reference Dimension" #: mouse.cpp:635 msgid "Other Supplementary Angle" msgstr "Other Supplementary Angle" #: mouse.cpp:640 msgid "Snap to Grid" msgstr "Snap to Grid" #: mouse.cpp:649 msgid "Remove Spline Point" msgstr "Remove Spline Point" #: mouse.cpp:684 msgid "Add Spline Point" msgstr "Add Spline Point" #: mouse.cpp:688 msgid "Cannot add spline point: maximum number of points reached." msgstr "Cannot add spline point: maximum number of points reached." #: mouse.cpp:713 msgid "Toggle Construction" msgstr "Toggle Construction" #: mouse.cpp:729 msgid "Delete Point-Coincident Constraint" msgstr "Delete Point-Coincident Constraint" #: mouse.cpp:747 msgid "Cut" msgstr "Cut" #: mouse.cpp:749 msgid "Copy" msgstr "Copy" #: mouse.cpp:753 msgid "Select All" msgstr "Select All" #: mouse.cpp:758 msgid "Paste" msgstr "Paste" #: mouse.cpp:760 msgid "Paste Transformed..." msgstr "Paste Transformed..." #: mouse.cpp:765 msgid "Delete" msgstr "Delete" #: mouse.cpp:768 msgid "Unselect All" msgstr "Unselect All" #: mouse.cpp:775 msgid "Unselect Hovered" msgstr "Unselect Hovered" #: mouse.cpp:784 msgid "Zoom to Fit" msgstr "Zoom to Fit" #: mouse.cpp:986 mouse.cpp:1274 msgid "click next point of line, or press Esc" msgstr "click next point of line, or press Esc" #: mouse.cpp:992 msgid "" "Can't draw rectangle in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Can't draw rectangle in 3d; first, activate a workplane with Sketch -> In " "Workplane." #: mouse.cpp:1026 msgid "click to place other corner of rectangle" msgstr "click to place other corner of rectangle" #: mouse.cpp:1047 msgid "click to set radius" msgstr "click to set radius" #: mouse.cpp:1052 msgid "" "Can't draw arc in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Can't draw arc in 3d; first, activate a workplane with Sketch -> In " "Workplane." #: mouse.cpp:1071 msgid "click to place point" msgstr "click to place point" #: mouse.cpp:1087 msgid "click next point of cubic, or press Esc" msgstr "click next point of cubic, or press Esc" #: mouse.cpp:1092 msgid "" "Sketching in a workplane already; sketch in 3d before creating new workplane." msgstr "" "Sketching in a workplane already; sketch in 3d before creating new workplane." #: mouse.cpp:1108 msgid "" "Can't draw text in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Can't draw text in 3d; first, activate a workplane with Sketch -> In " "Workplane." #: mouse.cpp:1125 msgid "click to place bottom right of text" msgstr "click to place bottom right of text" #: mouse.cpp:1131 msgid "" "Can't draw image in 3d; first, activate a workplane with Sketch -> In " "Workplane." msgstr "" "Can't draw image in 3d; first, activate a workplane with Sketch -> In " "Workplane." #: platform/gui.cpp:85 platform/gui.cpp:90 solvespace.cpp:552 msgctxt "file-type" msgid "SolveSpace models" msgstr "SolveSpace models" #: platform/gui.cpp:89 msgctxt "file-type" msgid "ALL" msgstr "ALL" #: platform/gui.cpp:91 msgctxt "file-type" msgid "IDF circuit board" msgstr "IDF circuit board" #: platform/gui.cpp:92 msgctxt "file-type" msgid "STL triangle mesh" msgstr "STL triangle mesh" #: platform/gui.cpp:96 msgctxt "file-type" msgid "PNG image" msgstr "PNG image" #: platform/gui.cpp:100 msgctxt "file-type" msgid "STL mesh" msgstr "STL mesh" #: platform/gui.cpp:101 msgctxt "file-type" msgid "Wavefront OBJ mesh" msgstr "Wavefront OBJ mesh" #: platform/gui.cpp:102 msgctxt "file-type" msgid "Three.js-compatible mesh, with viewer" msgstr "Three.js-compatible mesh, with viewer" #: platform/gui.cpp:103 msgctxt "file-type" msgid "Three.js-compatible mesh, mesh only" msgstr "Three.js-compatible mesh, mesh only" #: platform/gui.cpp:104 msgctxt "file-type" msgid "VRML text file" msgstr "VRML text file" #: platform/gui.cpp:108 platform/gui.cpp:115 platform/gui.cpp:122 msgctxt "file-type" msgid "STEP file" msgstr "STEP file" #: platform/gui.cpp:112 msgctxt "file-type" msgid "PDF file" msgstr "PDF file" #: platform/gui.cpp:113 msgctxt "file-type" msgid "Encapsulated PostScript" msgstr "Encapsulated PostScript" #: platform/gui.cpp:114 msgctxt "file-type" msgid "Scalable Vector Graphics" msgstr "Scalable Vector Graphics" #: platform/gui.cpp:116 platform/gui.cpp:123 msgctxt "file-type" msgid "DXF file (AutoCAD 2007)" msgstr "DXF file (AutoCAD 2007)" #: platform/gui.cpp:117 msgctxt "file-type" msgid "HPGL file" msgstr "HPGL file" #: platform/gui.cpp:118 msgctxt "file-type" msgid "G Code" msgstr "G Code" #: platform/gui.cpp:127 msgctxt "file-type" msgid "AutoCAD DXF and DWG files" msgstr "AutoCAD DXF and DWG files" #: platform/gui.cpp:131 msgctxt "file-type" msgid "Comma-separated values" msgstr "Comma-separated values" #: platform/guigtk.cpp:1367 platform/guimac.mm:1487 platform/guiwin.cpp:1641 msgid "untitled" msgstr "untitled" #: platform/guigtk.cpp:1378 platform/guigtk.cpp:1411 platform/guimac.mm:1445 #: platform/guiwin.cpp:1639 msgctxt "title" msgid "Save File" msgstr "Save File" #: platform/guigtk.cpp:1379 platform/guigtk.cpp:1412 platform/guimac.mm:1428 #: platform/guiwin.cpp:1645 msgctxt "title" msgid "Open File" msgstr "Open File" #: platform/guigtk.cpp:1382 platform/guigtk.cpp:1418 msgctxt "button" msgid "_Cancel" msgstr "_Cancel" #: platform/guigtk.cpp:1383 platform/guigtk.cpp:1416 msgctxt "button" msgid "_Save" msgstr "_Save" #: platform/guigtk.cpp:1384 platform/guigtk.cpp:1417 msgctxt "button" msgid "_Open" msgstr "_Open" #: solvespace.cpp:170 msgctxt "title" msgid "Autosave Available" msgstr "Autosave Available" #: solvespace.cpp:171 msgctxt "dialog" msgid "An autosave file is available for this sketch." msgstr "An autosave file is available for this sketch." #: solvespace.cpp:172 msgctxt "dialog" msgid "Do you want to load the autosave file instead?" msgstr "Do you want to load the autosave file instead?" #: solvespace.cpp:173 msgctxt "button" msgid "&Load autosave" msgstr "&Load autosave" #: solvespace.cpp:175 msgctxt "button" msgid "Do&n't Load" msgstr "Do&n't Load" #: solvespace.cpp:598 msgctxt "title" msgid "Modified File" msgstr "Modified File" #: solvespace.cpp:600 #, c-format msgctxt "dialog" msgid "Do you want to save the changes you made to the sketch “%s”?" msgstr "Do you want to save the changes you made to the sketch “%s”?" #: solvespace.cpp:603 msgctxt "dialog" msgid "Do you want to save the changes you made to the new sketch?" msgstr "Do you want to save the changes you made to the new sketch?" #: solvespace.cpp:606 msgctxt "dialog" msgid "Your changes will be lost if you don't save them." msgstr "Your changes will be lost if you don't save them." #: solvespace.cpp:607 msgctxt "button" msgid "&Save" msgstr "&Save" #: solvespace.cpp:609 msgctxt "button" msgid "Do&n't Save" msgstr "Do&n't Save" #: solvespace.cpp:630 msgctxt "title" msgid "(new sketch)" msgstr "(new sketch)" #: solvespace.cpp:637 msgctxt "title" msgid "Property Browser" msgstr "Property Browser" #: solvespace.cpp:699 msgid "" "Constraints are currently shown, and will be exported in the toolpath. This " "is probably not what you want; hide them by clicking the link at the top of " "the text window." msgstr "" "Constraints are currently shown, and will be exported in the toolpath. This " "is probably not what you want; hide them by clicking the link at the top of " "the text window." #: solvespace.cpp:771 #, c-format msgid "" "Can't identify file type from file extension of filename '%s'; try .dxf or ." "dwg." msgstr "" "Can't identify file type from file extension of filename '%s'; try .dxf or ." "dwg." #: solvespace.cpp:823 msgid "Constraint must have a label, and must not be a reference dimension." msgstr "Constraint must have a label, and must not be a reference dimension." #: solvespace.cpp:827 msgid "Bad selection for step dimension; select a constraint." msgstr "Bad selection for step dimension; select a constraint." #: solvespace.cpp:851 msgid "The assembly does not interfere, good." msgstr "The assembly does not interfere, good." #: solvespace.cpp:867 #, c-format msgid "" "The volume of the solid model is:\n" "\n" " %s" msgstr "" "The volume of the solid model is:\n" "\n" " %s" #: solvespace.cpp:876 #, c-format msgid "" "\n" "The volume of current group mesh is:\n" "\n" " %s" msgstr "" "\n" "The volume of current group mesh is:\n" "\n" " %s" #: solvespace.cpp:881 msgid "" "\n" "\n" "Curved surfaces have been approximated as triangles.\n" "This introduces error, typically of around 1%." msgstr "" "\n" "\n" "Curved surfaces have been approximated as triangles.\n" "This introduces error, typically of around 1%." #: solvespace.cpp:896 #, c-format msgid "" "The surface area of the selected faces is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" "The surface area of the selected faces is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." #: solvespace.cpp:905 msgid "" "This group does not contain a correctly-formed 2d closed area. It is open, " "not coplanar, or self-intersecting." msgstr "" "This group does not contain a correctly-formed 2d closed area. It is open, " "not coplanar, or self-intersecting." #: solvespace.cpp:917 #, c-format msgid "" "The area of the region sketched in this group is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" "The area of the region sketched in this group is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." #: solvespace.cpp:937 #, c-format msgid "" "The total length of the selected entities is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." msgstr "" "The total length of the selected entities is:\n" "\n" " %s\n" "\n" "Curves have been approximated as piecewise linear.\n" "This introduces error, typically of around 1%%." #: solvespace.cpp:943 msgid "Bad selection for perimeter; select line segments, arcs, and curves." msgstr "Bad selection for perimeter; select line segments, arcs, and curves." #: solvespace.cpp:959 msgid "Bad selection for trace; select a single point." msgstr "Bad selection for trace; select a single point." #: solvespace.cpp:986 #, c-format msgid "Couldn't write to '%s'" msgstr "Couldn't write to '%s'" #: solvespace.cpp:1016 msgid "The mesh is self-intersecting (NOT okay, invalid)." msgstr "The mesh is self-intersecting (NOT okay, invalid)." #: solvespace.cpp:1017 msgid "The mesh is not self-intersecting (okay, valid)." msgstr "The mesh is not self-intersecting (okay, valid)." #: solvespace.cpp:1019 msgid "The mesh has naked edges (NOT okay, invalid)." msgstr "The mesh has naked edges (NOT okay, invalid)." #: solvespace.cpp:1020 msgid "The mesh is watertight (okay, valid)." msgstr "The mesh is watertight (okay, valid)." #: solvespace.cpp:1023 #, c-format msgid "" "\n" "\n" "The model contains %d triangles, from %d surfaces." msgstr "" "\n" "\n" "The model contains %d triangles, from %d surfaces." #: solvespace.cpp:1027 #, c-format msgid "" "%s\n" "\n" "%s\n" "\n" "Zero problematic edges, good.%s" msgstr "" "%s\n" "\n" "%s\n" "\n" "Zero problematic edges, good.%s" #: solvespace.cpp:1030 #, c-format msgid "" "%s\n" "\n" "%s\n" "\n" "%d problematic edges, bad.%s" msgstr "" "%s\n" "\n" "%s\n" "\n" "%d problematic edges, bad.%s" #: solvespace.cpp:1043 #, c-format msgid "" "This is SolveSpace version %s.\n" "\n" "For more information, see http://solvespace.com/\n" "\n" "SolveSpace is free software: you are free to modify\n" "and/or redistribute it under the terms of the GNU\n" "General Public License (GPL) version 3 or later.\n" "\n" "There is NO WARRANTY, to the extent permitted by\n" "law. For details, visit http://gnu.org/licenses/\n" "\n" "© 2008-%d Jonathan Westhues and other authors.\n" msgstr "" "This is SolveSpace version %s.\n" "\n" "For more information, see http://solvespace.com/\n" "\n" "SolveSpace is free software: you are free to modify\n" "and/or redistribute it under the terms of the GNU\n" "General Public License (GPL) version 3 or later.\n" "\n" "There is NO WARRANTY, to the extent permitted by\n" "law. For details, visit http://gnu.org/licenses/\n" "\n" "© 2008-%d Jonathan Westhues and other authors.\n" #: style.cpp:185 msgid "" "Can't assign style to an entity that's derived from another entity; try " "assigning a style to this entity's parent." msgstr "" "Can't assign style to an entity that's derived from another entity; try " "assigning a style to this entity's parent." #: style.cpp:735 msgid "Style name cannot be empty" msgstr "Style name cannot be empty" #: textscreens.cpp:785 msgid "Can't repeat fewer than 1 time." msgstr "Can't repeat fewer than 1 time." #: textscreens.cpp:789 msgid "Can't repeat more than 999 times." msgstr "Can't repeat more than 999 times." #: textscreens.cpp:814 msgid "Group name cannot be empty" msgstr "Group name cannot be empty" #: textscreens.cpp:866 msgid "Opacity must be between zero and one." msgstr "Opacity must be between zero and one." #: textscreens.cpp:901 msgid "Radius cannot be zero or negative." msgstr "Radius cannot be zero or negative." #: toolbar.cpp:18 msgid "Sketch line segment" msgstr "Sketch line segment" #: toolbar.cpp:20 msgid "Sketch rectangle" msgstr "Sketch rectangle" #: toolbar.cpp:22 msgid "Sketch circle" msgstr "Sketch circle" #: toolbar.cpp:24 msgid "Sketch arc of a circle" msgstr "Sketch arc of a circle" #: toolbar.cpp:26 msgid "Sketch curves from text in a TrueType font" msgstr "Sketch curves from text in a TrueType font" #: toolbar.cpp:28 msgid "Sketch image from a file" msgstr "Sketch image from a file" #: toolbar.cpp:30 msgid "Create tangent arc at selected point" msgstr "Create tangent arc at selected point" #: toolbar.cpp:32 msgid "Sketch cubic Bezier spline" msgstr "Sketch cubic Bezier spline" #: toolbar.cpp:34 msgid "Sketch datum point" msgstr "Sketch datum point" #: toolbar.cpp:36 msgid "Toggle construction" msgstr "Toggle construction" #: toolbar.cpp:38 msgid "Split lines / curves where they intersect" msgstr "Split lines / curves where they intersect" #: toolbar.cpp:42 msgid "Constrain distance / diameter / length" msgstr "Constrain distance / diameter / length" #: toolbar.cpp:44 msgid "Constrain angle" msgstr "Constrain angle" #: toolbar.cpp:46 msgid "Constrain to be horizontal" msgstr "Constrain to be horizontal" #: toolbar.cpp:48 msgid "Constrain to be vertical" msgstr "Constrain to be vertical" #: toolbar.cpp:50 msgid "Constrain to be parallel or tangent" msgstr "Constrain to be parallel or tangent" #: toolbar.cpp:52 msgid "Constrain to be perpendicular" msgstr "Constrain to be perpendicular" #: toolbar.cpp:54 msgid "Constrain point on line / curve / plane / point" msgstr "Constrain point on line / curve / plane / point" #: toolbar.cpp:56 msgid "Constrain symmetric" msgstr "Constrain symmetric" #: toolbar.cpp:58 msgid "Constrain equal length / radius / angle" msgstr "Constrain equal length / radius / angle" #: toolbar.cpp:60 msgid "Constrain normals in same orientation" msgstr "Constrain normals in same orientation" #: toolbar.cpp:62 msgid "Other supplementary angle" msgstr "Other supplementary angle" #: toolbar.cpp:64 msgid "Toggle reference dimension" msgstr "Toggle reference dimension" #: toolbar.cpp:68 msgid "New group extruding active sketch" msgstr "New group extruding active sketch" #: toolbar.cpp:70 msgid "New group rotating active sketch" msgstr "New group rotating active sketch" #: toolbar.cpp:72 msgid "New group helix from active sketch" msgstr "New group helix from active sketch" #: toolbar.cpp:74 msgid "New group revolve active sketch" msgstr "New group revolve active sketch" #: toolbar.cpp:76 msgid "New group step and repeat rotating" msgstr "New group step and repeat rotating" #: toolbar.cpp:78 msgid "New group step and repeat translating" msgstr "New group step and repeat translating" #: toolbar.cpp:80 msgid "New group in new workplane (thru given entities)" msgstr "New group in new workplane (thru given entities)" #: toolbar.cpp:82 msgid "New group in 3d" msgstr "New group in 3d" #: toolbar.cpp:84 msgid "New group linking / assembling file" msgstr "New group linking / assembling file" #: toolbar.cpp:88 msgid "Nearest isometric view" msgstr "Nearest isometric view" #: toolbar.cpp:90 msgid "Align view to active workplane" msgstr "Align view to active workplane" #: util.cpp:165 msgctxt "title" msgid "Error" msgstr "Error" #: util.cpp:165 msgctxt "title" msgid "Message" msgstr "Message" #: util.cpp:170 msgctxt "button" msgid "&OK" msgstr "&OK" #: view.cpp:127 msgid "Scale cannot be zero or negative." msgstr "Scale cannot be zero or negative." #: view.cpp:139 view.cpp:148 msgid "Bad format: specify x, y, z" msgstr "Bad format: specify x, y, z" #~ msgid "&Mirror" #~ msgstr "&Mirror" #~ msgctxt "group-name" #~ msgid "mirror" #~ msgstr "mirror" #~ msgid "" #~ "Bad selection for length ratio constraint. This constraint can apply to:\n" #~ "\n" #~ " * two line segments\n" #~ msgstr "" #~ "Bad selection for length ratio constraint. This constraint can apply to:\n" #~ "\n" #~ " * two line segments\n" #~ msgid "" #~ "Bad selection for length difference constraint. This constraint can apply " #~ "to:\n" #~ "\n" #~ " * two line segments\n" #~ msgstr "" #~ "Bad selection for length difference constraint. This constraint can apply " #~ "to:\n" #~ "\n" #~ " * two line segments\n" #~ msgid "Length Ra&tio" #~ msgstr "Length Ra&tio" #~ msgid "Length Diff&erence" #~ msgstr "Length Diff&erence" #~ msgid "" #~ "Bad selection for new sketch in workplane. This group can be created " #~ "with:\n" #~ "\n" #~ " * a point (through the point, orthogonal to coordinate axes)\n" #~ " * a point and two line segments (through the point, parallel to the " #~ "lines)\n" #~ " * a workplane (copy of the workplane)\n" #~ msgstr "" #~ "Bad selection for new sketch in workplane. This group can be created " #~ "with:\n" #~ "\n" #~ " * a point (through the point, orthogonal to coordinate axes)\n" #~ " * a point and two line segments (through the point, parallel to the " #~ "lines)\n" #~ " * a workplane (copy of the workplane)\n" #~ msgctxt "file-type" #~ msgid "Q3D Object file" #~ msgstr "Q3D Object file"