#include "solvespace.h" #define mView (&GraphicsWindow::MenuView) #define mEdit (&GraphicsWindow::MenuEdit) #define mReq (&GraphicsWindow::MenuRequest) #define mCon (&Constraint::MenuConstrain) #define mFile (&SolveSpace::MenuFile) #define mGrp (&Group::MenuGroup) #define mAna (&SolveSpace::MenuAnalyze) #define mHelp (&SolveSpace::MenuHelp) #define S 0x100 #define C 0x200 #define F(k) (0xf0+(k)) const GraphicsWindow::MenuEntry GraphicsWindow::menu[] = { { 0, "&File", 0, NULL }, { 1, "&New\tCtrl+N", MNU_NEW, 'N'|C, mFile }, { 1, "&Open...\tCtrl+O", MNU_OPEN, 'O'|C, mFile }, {10, "Open &Recent", MNU_OPEN_RECENT, 0, mFile }, { 1, "&Save\tCtrl+S", MNU_SAVE, 'S'|C, mFile }, { 1, "Save &As...", MNU_SAVE_AS, 0, mFile }, { 1, NULL, 0, 0, NULL }, { 1, "Export &Image...", MNU_EXPORT_PNG, 0, mFile }, { 1, "Export 2d &View...", MNU_EXPORT_VIEW, 0, mFile }, { 1, "Export 2d &Section...", MNU_EXPORT_SECTION, 0, mFile }, { 1, "Export 3d &Wireframe...", MNU_EXPORT_WIREFRAME, 0, mFile }, { 1, "Export Triangle &Mesh...", MNU_EXPORT_MESH, 0, mFile }, { 1, "Export &Surfaces...", MNU_EXPORT_SURFACES,0, mFile }, { 1, NULL, 0, 0, NULL }, { 1, "E&xit", MNU_EXIT, 0, mFile }, { 0, "&Edit", 0, NULL }, { 1, "&Undo\tCtrl+Z", MNU_UNDO, 'Z'|C, mEdit }, { 1, "&Redo\tCtrl+Y", MNU_REDO, 'Y'|C, mEdit }, { 1, "Re&generate All\tSpace", MNU_REGEN_ALL, ' ', mEdit }, { 1, NULL, 0, NULL }, { 1, "Snap Selection to &Grid\t.", MNU_SNAP_TO_GRID, '.', mEdit }, { 1, "Rotate Imported &90°\t9", MNU_ROTATE_90, '9', mEdit }, { 1, "&Delete\tDel", MNU_DELETE, 127, mEdit }, { 1, NULL, 0, NULL }, { 1, "&Unselect All\tEsc", MNU_UNSELECT_ALL, 27, mEdit }, { 0, "&View", 0, NULL }, { 1, "Zoom &In\t+", MNU_ZOOM_IN, '+', mView }, { 1, "Zoom &Out\t-", MNU_ZOOM_OUT, '-', mView }, { 1, "Zoom To &Fit\tF", MNU_ZOOM_TO_FIT, 'F', mView }, { 1, NULL, 0, NULL }, { 1, "Show Snap &Grid\t>", MNU_SHOW_GRID, '.'|S, mView }, { 1, "Force &Parallel Projection\t`", MNU_PARALLEL_PROJ, '`', mView }, { 1, NULL, 0, NULL }, { 1, "Nearest &Ortho View\tF2", MNU_NEAREST_ORTHO, F(2), mView }, { 1, "Nearest &Isometric View\tF3", MNU_NEAREST_ISO, F(3), mView }, { 1, "&Center View At Point\tF4", MNU_CENTER_VIEW, F(4), mView }, { 1, NULL, 0, NULL }, { 1, "Show Text &Window\tTab", MNU_SHOW_TEXT_WND, '\t', mView }, { 1, "Show &Toolbar", MNU_SHOW_TOOLBAR, 0, mView }, { 1, NULL, 0, NULL }, { 1, "Dimensions in &Inches", MNU_UNITS_INCHES, 0, mView }, { 1, "Dimensions in &Millimeters", MNU_UNITS_MM, 0, mView }, { 0, "&New Group", 0, 0, NULL }, { 1, "Sketch In &3d\tShift+3", MNU_GROUP_3D, '3'|S, mGrp }, { 1, "Sketch In New &Workplane\tShift+W", MNU_GROUP_WRKPL, 'W'|S, mGrp }, { 1, NULL, 0, NULL }, { 1, "Step &Translating\tShift+T", MNU_GROUP_TRANS, 'T'|S, mGrp }, { 1, "Step &Rotating\tShift+R", MNU_GROUP_ROT, 'R'|S, mGrp }, { 1, NULL, 0, 0, NULL }, { 1, "E&xtrude\tShift+X", MNU_GROUP_EXTRUDE, 'X'|S, mGrp }, { 1, "&Lathe\tShift+L", MNU_GROUP_LATHE, 'L'|S, mGrp }, //{ 1, "&Sweep\tShift+S", MNU_GROUP_SWEEP, 'S'|S, mGrp }, //{ 1, "&Helical Sweep\tShift+H", MNU_GROUP_HELICAL, 'H'|S, mGrp }, { 1, NULL, 0, 0, NULL }, { 1, "Import / Assemble...\tShift+I", MNU_GROUP_IMPORT, 'I'|S, mGrp }, {11, "Import Recent", MNU_GROUP_RECENT, 0, mGrp }, { 0, "&Sketch", 0, NULL }, { 1, "In &Workplane\tW", MNU_SEL_WORKPLANE, 'W', mReq }, { 1, "Anywhere In &3d\t3", MNU_FREE_IN_3D, '3', mReq }, { 1, NULL, 0, NULL }, { 1, "Datum &Point\tP", MNU_DATUM_POINT, 'P', mReq }, { 1, "&Workplane", MNU_WORKPLANE, 0, mReq }, { 1, NULL, 0, NULL }, { 1, "Line &Segment\tS", MNU_LINE_SEGMENT, 'S', mReq }, { 1, "&Rectangle\tR", MNU_RECTANGLE, 'R', mReq }, { 1, "&Circle\tC", MNU_CIRCLE, 'C', mReq }, { 1, "&Arc of a Circle\tA", MNU_ARC, 'A', mReq }, { 1, "&Bezier Cubic Segment\tB", MNU_CUBIC, 'B', mReq }, { 1, NULL, 0, NULL }, { 1, "&Text in TrueType Font\tT", MNU_TTF_TEXT, 'T', mReq }, { 1, NULL, 0, NULL }, { 1, "To&ggle Construction\tG", MNU_CONSTRUCTION, 'G', mReq }, { 1, "Split Curves at &Intersection\tI", MNU_SPLIT_CURVES, 'I', mReq }, { 0, "&Constrain", 0, NULL }, { 1, "&Distance / Diameter\tD", MNU_DISTANCE_DIA, 'D', mCon }, { 1, "A&ngle\tN", MNU_ANGLE, 'N', mCon }, { 1, "Other S&upplementary Angle\tU", MNU_OTHER_ANGLE, 'U', mCon }, { 1, "Toggle R&eference Dim\tE", MNU_REFERENCE, 'E', mCon }, { 1, NULL, 0, NULL }, { 1, "&Horizontal\tH", MNU_HORIZONTAL, 'H', mCon }, { 1, "&Vertical\tV", MNU_VERTICAL, 'V', mCon }, { 1, NULL, 0, NULL }, { 1, "&On Point / Curve / Plane\tO", MNU_ON_ENTITY, 'O', mCon }, { 1, "E&qual Length / Radius / Angle\tQ", MNU_EQUAL, 'Q', mCon }, { 1, "Length Ra&tio\tZ", MNU_RATIO, 'Z', mCon }, { 1, "At &Midpoint\tM", MNU_AT_MIDPOINT, 'M', mCon }, { 1, "S&ymmetric\tY", MNU_SYMMETRIC, 'Y', mCon }, { 1, "Para&llel / Tangent\tL", MNU_PARALLEL, 'L', mCon }, { 1, "&Perpendicular\t[", MNU_PERPENDICULAR, '[', mCon }, { 1, "Same Orient&ation\tX", MNU_ORIENTED_SAME, 'X', mCon }, { 1, NULL, 0, NULL }, { 1, "Comment\t;", MNU_COMMENT, ';', mCon }, { 0, "&Analyze", 0, NULL }, { 1, "Measure &Volume\tCtrl+Shift+V", MNU_VOLUME, 'V'|S|C,mAna }, { 1, "Show &Interfering Parts\tCtrl+Shift+I", MNU_INTERFERENCE, 'I'|S|C,mAna }, { 1, "Show &Naked Edges\tCtrl+Shift+N", MNU_NAKED_EDGES, 'N'|S|C,mAna }, { 1, NULL, 0, NULL }, { 1, "Show Degrees of &Freedom\tCtrl+Shift+F", MNU_SHOW_DOF, 'F'|S|C,mAna }, { 1, NULL, 0, NULL }, { 1, "&Trace Point\tCtrl+Shift+T", MNU_TRACE_PT, 'T'|S|C,mAna }, { 1, "&Stop Tracing...\tCtrl+Shift+S", MNU_STOP_TRACING, 'S'|S|C,mAna }, { 1, "Step &Dimension...\tCtrl+Shift+D", MNU_STEP_DIM, 'D'|S|C,mAna }, { 0, "&Help", 0, 0, NULL }, { 1, "&Load License...", MNU_LICENSE, 0, mHelp }, { 1, NULL, 0, 0, NULL }, { 1, "&Website / Manual", MNU_WEBSITE, 0, mHelp }, { 1, "&About", MNU_ABOUT, 0, mHelp }, { -1 }, }; void GraphicsWindow::Init(void) { memset(this, 0, sizeof(*this)); scale = 5; offset = Vector::From(0, 0, 0); projRight = Vector::From(1, 0, 0); projUp = Vector::From(0, 1, 0); // Make sure those are valid; could get a mouse move without a mouse // down if someone depresses the button, then drags into our window. orig.projRight = projRight; orig.projUp = projUp; // And with the last group active activeGroup = SK.group.elem[SK.group.n-1].h; SK.GetGroup(activeGroup)->Activate(); showWorkplanes = false; showNormals = true; showPoints = true; showConstraints = true; showHdnLines = false; showShaded = true; showEdges = true; showMesh = false; showTextWindow = true; ShowTextWindow(showTextWindow); showSnapGrid = false; context.active = false; // Do this last, so that all the menus get updated correctly. EnsureValidActives(); } void GraphicsWindow::AnimateOntoWorkplane(void) { if(!LockedInWorkplane()) return; Entity *w = SK.GetEntity(ActiveWorkplane()); Quaternion quatf = w->Normal()->NormalGetNum(); Vector offsetf = (SK.GetEntity(w->point[0])->PointGetNum()).ScaledBy(-1); AnimateOnto(quatf, offsetf); } void GraphicsWindow::AnimateOnto(Quaternion quatf, Vector offsetf) { // Get our initial orientation and translation. Quaternion quat0 = Quaternion::From(projRight, projUp); Vector offset0 = offset; // Make sure we take the shorter of the two possible paths. double mp = (quatf.Minus(quat0)).Magnitude(); double mm = (quatf.Plus(quat0)).Magnitude(); if(mp > mm) { quatf = quatf.ScaledBy(-1); mp = mm; } double mo = (offset0.Minus(offsetf)).Magnitude()*scale; // Animate transition, unless it's a tiny move. SDWORD dt = (mp < 0.01 && mo < 10) ? (-20) : (SDWORD)(100 + 1000*mp + 0.4*mo); // Don't ever animate for longer than 2000 ms; we can get absurdly // long translations (as measured in pixels) if the user zooms out, moves, // and then zooms in again. if(dt > 2000) dt = 2000; SDWORD tn, t0 = GetMilliseconds(); double s = 0; Quaternion dq = quatf.Times(quat0.Inverse()); do { offset = (offset0.ScaledBy(1 - s)).Plus(offsetf.ScaledBy(s)); Quaternion quat = (dq.ToThe(s)).Times(quat0); quat = quat.WithMagnitude(1); projRight = quat.RotationU(); projUp = quat.RotationV(); PaintGraphics(); tn = GetMilliseconds(); s = (tn - t0)/((double)dt); } while((tn - t0) < dt); projRight = quatf.RotationU(); projUp = quatf.RotationV(); offset = offsetf; InvalidateGraphics(); } void GraphicsWindow::HandlePointForZoomToFit(Vector p, Point2d *pmax, Point2d *pmin, double *wmin, bool div) { double w; Vector pp = ProjectPoint4(p, &w); // If div is true, then we calculate a perspective projection of the point. // If not, then we do a parallel projection regardless of the current // scale factor. if(div) { pp = pp.ScaledBy(1.0/w); } pmax->x = max(pmax->x, pp.x); pmax->y = max(pmax->y, pp.y); pmin->x = min(pmin->x, pp.x); pmin->y = min(pmin->y, pp.y); *wmin = min(*wmin, w); } void GraphicsWindow::LoopOverPoints(Point2d *pmax, Point2d *pmin, double *wmin, bool div, bool includingInvisibles) { HandlePointForZoomToFit(Vector::From(0, 0, 0), pmax, pmin, wmin, div); int i, j; for(i = 0; i < SK.entity.n; i++) { Entity *e = &(SK.entity.elem[i]); if(!(e->IsVisible() || includingInvisibles)) continue; if(e->IsPoint()) { HandlePointForZoomToFit(e->PointGetNum(), pmax, pmin, wmin, div); } else if(e->type == Entity::CIRCLE) { // Lots of entities can extend outside the bbox of their points, // but circles are particularly bad. We want to get things halfway // reasonable without the mesh, because a zoom to fit is used to // set the zoom level to set the chord tol. double r = e->CircleGetRadiusNum(); Vector c = SK.GetEntity(e->point[0])->PointGetNum(); Quaternion q = SK.GetEntity(e->normal)->NormalGetNum(); for(j = 0; j < 4; j++) { Vector p = (j == 0) ? (c.Plus(q.RotationU().ScaledBy( r))) : (j == 1) ? (c.Plus(q.RotationU().ScaledBy(-r))) : (j == 2) ? (c.Plus(q.RotationV().ScaledBy( r))) : (c.Plus(q.RotationV().ScaledBy(-r))); HandlePointForZoomToFit(p, pmax, pmin, wmin, div); } } } Group *g = SK.GetGroup(activeGroup); g->GenerateDisplayItems(); for(i = 0; i < g->displayMesh.l.n; i++) { STriangle *tr = &(g->displayMesh.l.elem[i]); HandlePointForZoomToFit(tr->a, pmax, pmin, wmin, div); HandlePointForZoomToFit(tr->b, pmax, pmin, wmin, div); HandlePointForZoomToFit(tr->c, pmax, pmin, wmin, div); } for(i = 0; i < g->poly.l.n; i++) { SContour *sc = &(g->poly.l.elem[i]); for(j = 0; j < sc->l.n; j++) { HandlePointForZoomToFit(sc->l.elem[j].p, pmax, pmin, wmin, div); } } } void GraphicsWindow::ZoomToFit(bool includingInvisibles) { // On the first run, ignore perspective. Point2d pmax = { -1e12, -1e12 }, pmin = { 1e12, 1e12 }; double wmin = 1; LoopOverPoints(&pmax, &pmin, &wmin, false, includingInvisibles); double xm = (pmax.x + pmin.x)/2, ym = (pmax.y + pmin.y)/2; double dx = pmax.x - pmin.x, dy = pmax.y - pmin.y; offset = offset.Plus(projRight.ScaledBy(-xm)).Plus( projUp. ScaledBy(-ym)); // And based on this, we calculate the scale and offset if(dx == 0 && dy == 0) { scale = 5; } else { double scalex = 1e12, scaley = 1e12; if(dx != 0) scalex = 0.9*width /dx; if(dy != 0) scaley = 0.9*height/dy; scale = min(scalex, scaley); scale = min(300, scale); scale = max(0.003, scale); } // Then do another run, considering the perspective. pmax.x = -1e12; pmax.y = -1e12; pmin.x = 1e12; pmin.y = 1e12; wmin = 1; LoopOverPoints(&pmax, &pmin, &wmin, true, includingInvisibles); // Adjust the scale so that no points are behind the camera if(wmin < 0.1) { double k = SS.CameraTangent(); // w = 1+k*scale*z double zmin = (wmin - 1)/(k*scale); // 0.1 = 1 + k*scale*zmin // (0.1 - 1)/(k*zmin) = scale scale = min(scale, (0.1 - 1)/(k*zmin)); } } void GraphicsWindow::MenuView(int id) { switch(id) { case MNU_ZOOM_IN: SS.GW.scale *= 1.2; break; case MNU_ZOOM_OUT: SS.GW.scale /= 1.2; break; case MNU_ZOOM_TO_FIT: SS.GW.ZoomToFit(false); break; case MNU_SHOW_GRID: SS.GW.showSnapGrid = !SS.GW.showSnapGrid; if(SS.GW.showSnapGrid && !SS.GW.LockedInWorkplane()) { Message("No workplane is active, so the grid will not " "appear."); } SS.GW.EnsureValidActives(); InvalidateGraphics(); break; case MNU_PARALLEL_PROJ: SS.forceParallelProj = !SS.forceParallelProj; if(SS.cameraTangent < 1e-6) { Error("The perspective factor is set to zero, so the view will " "always be a parallel projection.\r\n\r\n" "For a perspective projection, modify the camera tangent " "in the configuration screen. A value around 0.3 is " "typical."); } SS.GW.EnsureValidActives(); InvalidateGraphics(); break; case MNU_NEAREST_ORTHO: case MNU_NEAREST_ISO: { static const Vector ortho[3] = { Vector::From(1, 0, 0), Vector::From(0, 1, 0), Vector::From(0, 0, 1) }; double sqrt2 = sqrt(2.0), sqrt6 = sqrt(6.0); Quaternion quat0 = Quaternion::From(SS.GW.projRight, SS.GW.projUp); Quaternion quatf = quat0; double dmin = 1e10; // There are 24 possible views; 3*2*2*2 int i, j, negi, negj; for(i = 0; i < 3; i++) { for(j = 0; j < 3; j++) { if(i == j) continue; for(negi = 0; negi < 2; negi++) { for(negj = 0; negj < 2; negj++) { Vector ou = ortho[i], ov = ortho[j]; if(negi) ou = ou.ScaledBy(-1); if(negj) ov = ov.ScaledBy(-1); Vector on = ou.Cross(ov); Vector u, v; if(id == MNU_NEAREST_ORTHO) { u = ou; v = ov; } else { u = ou.ScaledBy(1/sqrt2).Plus( on.ScaledBy(-1/sqrt2)); v = ou.ScaledBy(-1/sqrt6).Plus( ov.ScaledBy(2/sqrt6).Plus( on.ScaledBy(-1/sqrt6))); } Quaternion quatt = Quaternion::From(u, v); double d = min( (quatt.Minus(quat0)).Magnitude(), (quatt.Plus(quat0)).Magnitude()); if(d < dmin) { dmin = d; quatf = quatt; } } } } } SS.GW.AnimateOnto(quatf, SS.GW.offset); break; } case MNU_CENTER_VIEW: SS.GW.GroupSelection(); if(SS.GW.gs.n == 1 && SS.GW.gs.points == 1) { Quaternion quat0; // Offset is the selected point, quaternion is same as before Vector pt = SK.GetEntity(SS.GW.gs.point[0])->PointGetNum(); quat0 = Quaternion::From(SS.GW.projRight, SS.GW.projUp); SS.GW.AnimateOnto(quat0, pt.ScaledBy(-1)); SS.GW.ClearSelection(); } else { Error("Select a point; this point will become the center " "of the view on screen."); } break; case MNU_SHOW_TEXT_WND: SS.GW.showTextWindow = !SS.GW.showTextWindow; SS.GW.EnsureValidActives(); break; case MNU_SHOW_TOOLBAR: SS.showToolbar = !SS.showToolbar; SS.GW.EnsureValidActives(); InvalidateGraphics(); break; case MNU_UNITS_MM: SS.viewUnits = SolveSpace::UNIT_MM; SS.later.showTW = true; SS.GW.EnsureValidActives(); break; case MNU_UNITS_INCHES: SS.viewUnits = SolveSpace::UNIT_INCHES; SS.later.showTW = true; SS.GW.EnsureValidActives(); break; default: oops(); } InvalidateGraphics(); } void GraphicsWindow::EnsureValidActives(void) { bool change = false; // The active group must exist, and not be the references. Group *g = SK.group.FindByIdNoOops(activeGroup); if((!g) || (g->h.v == Group::HGROUP_REFERENCES.v)) { int i; for(i = 0; i < SK.group.n; i++) { if(SK.group.elem[i].h.v != Group::HGROUP_REFERENCES.v) { break; } } if(i >= SK.group.n) { // This can happen if the user deletes all the groups in the // sketch. It's difficult to prevent that, because the last // group might have been deleted automatically, because it failed // a dependency. There needs to be something, so create a plane // drawing group and activate that. They should never be able // to delete the references, though. activeGroup = SS.CreateDefaultDrawingGroup(); } else { activeGroup = SK.group.elem[i].h; } SK.GetGroup(activeGroup)->Activate(); change = true; } // The active coordinate system must also exist. if(LockedInWorkplane()) { Entity *e = SK.entity.FindByIdNoOops(ActiveWorkplane()); if(e) { hGroup hgw = e->group; if(hgw.v != activeGroup.v && SS.GroupsInOrder(activeGroup, hgw)) { // The active workplane is in a group that comes after the // active group; so any request or constraint will fail. SetWorkplaneFreeIn3d(); change = true; } } else { SetWorkplaneFreeIn3d(); change = true; } } // And update the checked state for various menus bool locked = LockedInWorkplane(); CheckMenuById(MNU_FREE_IN_3D, !locked); CheckMenuById(MNU_SEL_WORKPLANE, locked); SS.UndoEnableMenus(); switch(SS.viewUnits) { case SolveSpace::UNIT_MM: case SolveSpace::UNIT_INCHES: break; default: SS.viewUnits = SolveSpace::UNIT_MM; } CheckMenuById(MNU_UNITS_MM, SS.viewUnits == SolveSpace::UNIT_MM); CheckMenuById(MNU_UNITS_INCHES, SS.viewUnits == SolveSpace::UNIT_INCHES); ShowTextWindow(SS.GW.showTextWindow); CheckMenuById(MNU_SHOW_TEXT_WND, SS.GW.showTextWindow); CheckMenuById(MNU_SHOW_TOOLBAR, SS.showToolbar); CheckMenuById(MNU_PARALLEL_PROJ, SS.forceParallelProj); CheckMenuById(MNU_SHOW_GRID, SS.GW.showSnapGrid); if(change) SS.later.showTW = true; } void GraphicsWindow::SetWorkplaneFreeIn3d(void) { SK.GetGroup(activeGroup)->activeWorkplane = Entity::FREE_IN_3D; } hEntity GraphicsWindow::ActiveWorkplane(void) { Group *g = SK.group.FindByIdNoOops(activeGroup); if(g) { return g->activeWorkplane; } else { return Entity::FREE_IN_3D; } } bool GraphicsWindow::LockedInWorkplane(void) { return (SS.GW.ActiveWorkplane().v != Entity::FREE_IN_3D.v); } void GraphicsWindow::ForceTextWindowShown(void) { if(!showTextWindow) { showTextWindow = true; CheckMenuById(MNU_SHOW_TEXT_WND, true); ShowTextWindow(TRUE); } } void GraphicsWindow::DeleteTaggedRequests(void) { // Rewrite any point-coincident constraints that were affected by this // deletion. Request *r; for(r = SK.request.First(); r; r = SK.request.NextAfter(r)) { if(!r->tag) continue; FixConstraintsForRequestBeingDeleted(r->h); } // and then delete the tagged requests. SK.request.RemoveTagged(); // An edit might be in progress for the just-deleted item. So // now it's not. HideGraphicsEditControl(); HideTextEditControl(); // And clear out the selection, which could contain that item. ClearSuper(); // And regenerate to get rid of what it generates, plus anything // that references it (since the regen code checks for that). SS.GenerateAll(0, INT_MAX); EnsureValidActives(); SS.later.showTW = true; } Vector GraphicsWindow::SnapToGrid(Vector p) { if(!LockedInWorkplane()) return p; EntityBase *wrkpl = SK.GetEntity(ActiveWorkplane()), *norm = wrkpl->Normal(); Vector wo = SK.GetEntity(wrkpl->point[0])->PointGetNum(), wu = norm->NormalU(), wv = norm->NormalV(), wn = norm->NormalN(); Vector pp = (p.Minus(wo)).DotInToCsys(wu, wv, wn); pp.x = floor((pp.x / SS.gridSpacing) + 0.5)*SS.gridSpacing; pp.y = floor((pp.y / SS.gridSpacing) + 0.5)*SS.gridSpacing; pp.z = 0; return pp.ScaleOutOfCsys(wu, wv, wn).Plus(wo); } void GraphicsWindow::MenuEdit(int id) { switch(id) { case MNU_UNSELECT_ALL: SS.GW.GroupSelection(); // If there's nothing selected to de-select, and no operation // to cancel, then perhaps they want to return to the home // screen in the text window. if(SS.GW.gs.n == 0 && SS.GW.gs.constraints == 0 && SS.GW.pending.operation == 0) { if(!(TextEditControlIsVisible() || GraphicsEditControlIsVisible())) { if(SS.TW.shown.screen == TextWindow::SCREEN_STYLE_INFO) { SS.TW.GoToScreen(TextWindow::SCREEN_LIST_OF_STYLES); } else { SS.TW.ClearSuper(); } } } SS.GW.ClearSuper(); HideTextEditControl(); SS.nakedEdges.Clear(); break; case MNU_DELETE: { SS.UndoRemember(); int i; SK.request.ClearTags(); SK.constraint.ClearTags(); for(i = 0; i < MAX_SELECTED; i++) { Selection *s = &(SS.GW.selection[i]); hRequest r; r.v = 0; if(s->entity.v && s->entity.isFromRequest()) { r = s->entity.request(); } if(r.v && !r.IsFromReferences()) { SK.request.Tag(r, 1); } if(s->constraint.v) { SK.constraint.Tag(s->constraint, 1); } } SK.constraint.RemoveTagged(); SS.GW.DeleteTaggedRequests(); break; } case MNU_ROTATE_90: { SS.GW.GroupSelection(); Entity *e = NULL; if(SS.GW.gs.n == 1 && SS.GW.gs.points == 1) { e = SK.GetEntity(SS.GW.gs.point[0]); } else if(SS.GW.gs.n == 1 && SS.GW.gs.entities == 1) { e = SK.GetEntity(SS.GW.gs.entity[0]); } SS.GW.ClearSelection(); hGroup hg = e ? e->group : SS.GW.activeGroup; Group *g = SK.GetGroup(hg); if(g->type != Group::IMPORTED) { Error("To use this command, select a point or other " "entity from an imported part, or make an import " "group the active group."); break; } SS.UndoRemember(); // Rotate by ninety degrees about the coordinate axis closest // to the screen normal. Vector norm = SS.GW.projRight.Cross(SS.GW.projUp); norm = norm.ClosestOrtho(); norm = norm.WithMagnitude(1); Quaternion qaa = Quaternion::From(norm, PI/2); g->TransformImportedBy(Vector::From(0, 0, 0), qaa); // and regenerate as necessary. SS.MarkGroupDirty(hg); SS.GenerateAll(); break; } case MNU_SNAP_TO_GRID: { if(!SS.GW.LockedInWorkplane()) { Error("No workplane is active. Select a workplane to define " "the plane for the snap grid."); break; } SS.GW.GroupSelection(); if(SS.GW.gs.n != SS.GW.gs.points || SS.GW.gs.constraints != SS.GW.gs.comments || (SS.GW.gs.n == 0 && SS.GW.gs.constraints == 0)) { Error("Can't snap these items to grid; select only points or " "text comments. To snap a line, select its endpoints."); break; } SS.UndoRemember(); int i; for(i = 0; i < SS.GW.gs.points; i++) { hEntity hp = SS.GW.gs.point[i]; Entity *ep = SK.GetEntity(hp); Vector p = ep->PointGetNum(); ep->PointForceTo(SS.GW.SnapToGrid(p)); // Regenerate, with this point marked as dragged so that it // gets placed as close as possible to our snap SS.GW.pending.point = hp; SS.MarkGroupDirty(ep->group); SS.GenerateAll(); SS.GW.pending.point = Entity::NO_ENTITY; } for(i = 0; i < SS.GW.gs.constraints; i++) { Constraint *c = SK.GetConstraint(SS.GW.gs.constraint[i]); c->disp.offset = SS.GW.SnapToGrid(c->disp.offset); } SS.GW.ClearSelection(); InvalidateGraphics(); break; } case MNU_UNDO: SS.UndoUndo(); break; case MNU_REDO: SS.UndoRedo(); break; case MNU_REGEN_ALL: SS.ReloadAllImported(); SS.GenerateAll(0, INT_MAX); SS.later.showTW = true; break; default: oops(); } } void GraphicsWindow::MenuRequest(int id) { char *s; switch(id) { case MNU_SEL_WORKPLANE: { SS.GW.GroupSelection(); Group *g = SK.GetGroup(SS.GW.activeGroup); if(SS.GW.gs.n == 1 && SS.GW.gs.workplanes == 1) { // A user-selected workplane g->activeWorkplane = SS.GW.gs.entity[0]; } else if(g->type == Group::DRAWING_WORKPLANE) { // The group's default workplane g->activeWorkplane = g->h.entity(0); } if(!SS.GW.LockedInWorkplane()) { Error("Select workplane (e.g., the XY plane) " "before locking on."); break; } // Align the view with the selected workplane SS.GW.AnimateOntoWorkplane(); SS.GW.ClearSuper(); SS.later.showTW = true; break; } case MNU_FREE_IN_3D: SS.GW.SetWorkplaneFreeIn3d(); SS.GW.EnsureValidActives(); SS.later.showTW = true; InvalidateGraphics(); break; case MNU_ARC: { SS.GW.GroupSelection(); if(SS.GW.gs.n == 1 && SS.GW.gs.points == 1) { SS.GW.MakeTangentArc(); } else { s = "click point on arc (draws anti-clockwise)"; goto c; } break; } case MNU_DATUM_POINT: s = "click to place datum point"; goto c; case MNU_LINE_SEGMENT: s = "click first point of line segment"; goto c; case MNU_CUBIC: s = "click first point of cubic segment"; goto c; case MNU_CIRCLE: s = "click center of circle"; goto c; case MNU_WORKPLANE: s = "click origin of workplane"; goto c; case MNU_RECTANGLE: s = "click one corner of rectangle"; goto c; case MNU_TTF_TEXT: s = "click top left of text"; goto c; c: SS.GW.pending.operation = id; SS.GW.pending.description = s; SS.later.showTW = true; break; case MNU_CONSTRUCTION: { SS.GW.GroupSelection(); int i; for(i = 0; i < SS.GW.gs.entities; i++) { hEntity he = SS.GW.gs.entity[i]; if(!he.isFromRequest()) continue; Request *r = SK.GetRequest(he.request()); r->construction = !(r->construction); SS.MarkGroupDirty(r->group); } SS.GW.ClearSelection(); SS.GenerateAll(); break; } case MNU_SPLIT_CURVES: SS.GW.SplitLinesOrCurves(); break; default: oops(); } } void GraphicsWindow::ClearSuper(void) { HideGraphicsEditControl(); ClearPending(); ClearSelection(); hover.Clear(); EnsureValidActives(); } void GraphicsWindow::ToggleBool(int link, DWORD v) { bool *vb = (bool *)v; *vb = !*vb; // The faces are shown as special stippling on the shaded triangle mesh, // so not meaningful to show them and hide the shaded. if(!SS.GW.showShaded) SS.GW.showFaces = false; // We might need to regenerate the mesh and edge list, since the edges // wouldn't have been generated if they were previously hidden. if(SS.GW.showEdges) (SK.GetGroup(SS.GW.activeGroup))->displayDirty = true; SS.GenerateAll(); InvalidateGraphics(); SS.later.showTW = true; }