3.1 KiB
const basicWorkflowTS = [ 10, 'Sketching on a plane', 10, 'Extruding a sketch to a solid', 10, 'Sketch on a face of a solid', 10, 'Peforming boolean operation between solids', ]
const editWorkflowTS = [ 10, 'opening a file from disk', 10, 'editing an existing sketch', 10, 'accepting the edit and exiting', ]
const exportTS = [ 10, 'selecting a body for export', 10, 'initiate export', 10, 'loading exported stl into 3dprint slicer', 10, 'result', ]
s
Turn the shapes you drew into 3D solids
Combine multiple solids to form more complex solids
uplaod your design to a 3d printer
navigation tip
offer to watch three video demos
General Workflow for part creation
Specify a sketch plane
Draw a closed loop shape
Extrude 2D sketch
the program consists of 4 major areas labelled below
Dialog Box Normally hidden. This box appears when the user is adding or editting a sketch or extrusion
input area: This specifies the extrusion amount flip icon: This flips the extrusion direction green check: When clicked the program will proceed with adding or editting a sketch/extrusion red x: allows the user to bail out of adding or editting a sketch/extrusion
Toolbar
sketch: Initiates a new sketch, before clicking this button, the user must first select a plane, or three points on existing extrusions to define a sketch plane. extrude: Intiates new extrusion dialog. before clickin gthis button. The user must firs select a sketch to extrude from
boolean add: Creates a new solid that is a boolean union or two selected solids.
boolean subtract: Creates a new solid that is a boolean subtraction of the second selected solid from the first selected solid.
boolean add: Creates a new solid that is a boolean intersection or two selected solids.
new document: Wipes the current workspace and starts a fresh document save: saves current document. on the inital save the user can specify save location and file name open: loads an existing document from the local disk. STL: Exports selected solid to 3d print friendly stl format
extrude: creates a new extrusion from the current sketch.
line: initiates line sketch mode. Subsequent clicks on the canvas define the vertices of the line segment chain. arc: initiates arc sketch mode. Subsequently, a three click sequence on the canvas spefies the arc shape. The first sets the start point, the seconds the endpoint, and the third the radius.
dimension: allows hte user to add distance or angle constraints to the sketch. When 2 points, or 1 point and 1 line are selected, a distance contraint is added. When two lines are selected, an angle constraint is added coincident: Adds a coincident contraint between two points, or a line and a point vertical: adds a vertical constraint the the selected line, or two selected points horizontal: adds a horizontal constraint the the selected line, or two selected points tangent: adds a tangent constraint between selected two arcs, or a line and a arc. The selected entities must first between connected by a coicident contraint on their endpoints
User can click this again or escape to exit this mode
Design Tree