tinyriscv/rtl/top/tinyriscv_soc_top.sv

156 lines
5.0 KiB
Systemverilog
Raw Normal View History

/*
Copyright 2020 Blue Liang, liangkangnan@163.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
`include "../core/defines.sv"
// tinyriscv soc顶层模块
module tinyriscv_soc_top(
input wire clk,
input wire rst_ext_i,
output wire halted_ind, // jtag是否已经halt住CPU信号
output wire uart_tx_pin, // UART发送引脚
input wire uart_rx_pin, // UART接收引脚
inout wire[1:0] gpio, // GPIO引脚
input wire jtag_TCK, // JTAG TCK引脚
input wire jtag_TMS, // JTAG TMS引脚
input wire jtag_TDI, // JTAG TDI引脚
output wire jtag_TDO // JTAG TDO引脚
);
localparam int MASTERS = 2; //Number of master ports
localparam int SLAVES = 2; //Number of slave ports
localparam int CoreD = 0;
localparam int CoreI = 1;
localparam int Rom = 0;
localparam int Ram = 1;
wire master_req [MASTERS];
wire master_gnt [MASTERS];
wire master_rvalid [MASTERS];
wire [31:0] master_addr [MASTERS];
wire master_we [MASTERS];
wire [ 3:0] master_be [MASTERS];
wire [31:0] master_rdata [MASTERS];
wire [31:0] master_wdata [MASTERS];
wire slave_req [SLAVES];
wire slave_gnt [SLAVES];
wire slave_rvalid [SLAVES];
wire [31:0] slave_addr [SLAVES];
wire slave_we [SLAVES];
wire [ 3:0] slave_be [SLAVES];
wire [31:0] slave_rdata [SLAVES];
wire [31:0] slave_wdata [SLAVES];
wire [31:0] slave_addr_mask [SLAVES];
wire [31:0] slave_addr_base [SLAVES];
tinyriscv_core u_tinyriscv_core(
.clk(clk),
.rst_n(rst_ext_i),
.instr_req_o(master_req[CoreI]),
.instr_gnt_i(master_gnt[CoreI]),
.instr_rvalid_i(master_rvalid[CoreI]),
.instr_addr_o(master_addr[CoreI]),
.instr_rdata_i(master_rdata[CoreI]),
.instr_err_i(1'b0),
.data_req_o(master_req[CoreD]),
.data_gnt_i(master_gnt[CoreD]),
.data_rvalid_i(master_rvalid[CoreD]),
.data_we_o(master_we[CoreD]),
.data_be_o(master_be[CoreD]),
.data_addr_o(master_addr[CoreD]),
.data_wdata_o(master_wdata[CoreD]),
.data_rdata_i(master_rdata[CoreD]),
.data_err_i(1'b0),
.jtag_halt_i(1'b0),
.int_i(0)
);
assign slave_addr_mask[Rom] = `ROM_ADDR_MASK;
assign slave_addr_base[Rom] = `ROM_ADDR_BASE;
// 指令存储器
rom #(
.DP(`ROM_DEPTH)
) u_rom(
.clk(clk),
.rst_n(rst_ext_i),
.addr_i(slave_addr[Rom]),
.data_i(slave_wdata[Rom]),
.sel_i(slave_be[Rom]),
.we_i(slave_we[Rom]),
.data_o(slave_rdata[Rom])
);
assign slave_addr_mask[Ram] = `RAM_ADDR_MASK;
assign slave_addr_base[Ram] = `RAM_ADDR_BASE;
// 数据存储器
ram #(
.DP(`RAM_DEPTH)
) u_ram(
.clk(clk),
.rst_n(rst_ext_i),
.addr_i(slave_addr[Ram]),
.data_i(slave_wdata[Ram]),
.sel_i(slave_be[Ram]),
.we_i(slave_we[Ram]),
.data_o(slave_rdata[Ram])
);
obi_interconnect #(
.MASTERS(MASTERS),
.SLAVES(SLAVES)
) bus (
.clk_i(clk),
.rst_ni(rst_ext_i),
.master_req_i(master_req),
.master_gnt_o(master_gnt),
.master_rvalid_o(master_rvalid),
.master_we_i(master_we),
.master_be_i(master_be),
.master_addr_i(master_addr),
.master_wdata_i(master_wdata),
.master_rdata_o(master_rdata),
.slave_addr_mask_i(slave_addr_mask),
.slave_addr_base_i(slave_addr_base),
.slave_req_o(slave_req),
.slave_gnt_i(slave_gnt),
.slave_rvalid_i(slave_rvalid),
.slave_we_o(slave_we),
.slave_be_o(slave_be),
.slave_addr_o(slave_addr),
.slave_wdata_o(slave_wdata),
.slave_rdata_i(slave_rdata)
);
endmodule